Fontastic LEMA 610CH Multifunctional Smartwatch User Manual

: June 10, 2024
: fontastic

Fontastic LEMA 610CH Multifunctional Smartwatch User Manual

Please read the user manual carefully before using the device.

Package contents

Smartwatch
Charging pad
User Manual

Overview

AMOLED display: swipe up, down, left or right to scroll through functions and menus. Tap to make a selection.
Button: power on/off, menu, back
Button: Sport menu
Sensors
Speaker
Microphone

Smartwatch Charging

Connect the USB-A port of the wireless charger to a USB power source. Place the bottom of the Smartwatch on the connected charger as shown. Magnets in the charger ensure a secure hold of the Smartwatch. The charging icon ( ) is shown on the display as soon as the watch is placed on the connected charger. If the symbol is displayed as full, the device is fully charged and can be removed from the charging pad. Remove the charging pad from the power source.
Smartwatch Charging

Fonta Fit max app

The companion app „FontaFit max“ is used to connect the smartphone to the watch and synchronize settings, as well as activity data with the watch. The app is also responsible for reading notifications (e.g. WhatsApp, calls, SMS) from the smartphone and forwarding them to the watch.

Installing the app

Download and install the „FontaFit max“ app by scanning the QR code, or search for „FontaFit max“ in App Store or Play Store. Link: www.fontastic.eu/fontafit_max

Note: The app supports iOS 12.0 and Android 5.0 or higher operating systems, as well as BT 5.0 & 3.0.

Note: Please refer to the privacy policy for processing your personal data in the app or atwww.fontastic.eu/privacy_fontafitmax .

Power On/Off

Switching on: To turn on the smartwatch, press and hold the button (2) until the display turns on.

Switching off: To turn off the smartwatch, activate the display with the button (2) and press and hold it again until you are in the power off menu. Tap on „ Switch off“ and confirm your selection.

Connecting and using the app

Your Fontastic ® Smartwatch LEMA needs to be connected to your smartphone via the „Fonta Fit max“ app. Do not connect the fitness watch and your smartphone directly via the Bluetooth® function of the smartphone.

Activate Bluetooth® on your smartphone and turn on the smartwatch. If you have not yet downloaded the Fonta Fit max app, you can install it by scanning the QR code displayed on the smartwatch.
start the „FontaFit max“ app, accept the privacy policy and select the „Add device“ area in the „Settings“ section.
If the app asks for permissions, please accept them so that the smartwatch can be found and select the watch from the list.
Confirm the connection on the smartwatch.
Once the watch is connected to the app, you will be guided through the settings. Go through them step by step. In order to use all the features, various permissions are required for the FontaFit max app. If permissions are not set, this may affect the functions. We recommend accepting all permissions.
On Android, confirm the pairing request with LEMA to be able to use the Calls, Assistant and Music player functions. The connection is established automatically on iOS.

Note: You can view the connection status of the watch at any time on the watch via the control center. watch.

Note: Only one watch can be connected via the app. Using multiple watches simultaneously via a smartphone, is not supported.

Note: For energy saving reasons (battery life of smartphone or watch), the app does not permanently update the data with the watch. To force synchronization, swipe down once from the top of the app‘s main screen.

Note: Time and date are automatically transferred from the paired smartphone to the watch, these cannot be set manually.

Note: The data collected by the smartwatch is transferred to the FontaFit max app and can be viewed there. Information on steps, sleep, pulse, blood pressure, blood oxygen and sports activities are displayed by tapping the respective menu in the app.

Display

Fonta Fit LEMA has a touch-sensitive display with Always-On function, which permanently shows the time when Always-On is on or shows the time by raising the arm when Always-On is off. The display can be activated at any time by pressing button (2).

Changing the dial

Press and hold on the watch face of the smartwatch until the selection opens. To change the watch face, swipe left/right on the display or scroll through the selection by turning the upper side button. Confirm selection by tapping.
Changing the dial

Basic operation of the smartwatch

Swipe sideways to switch to the vital functions. Additional functions can be added or removed under „+ Customize“. Swiping from bottom to top takes you to notifications. Swiping from top to bottom takes you to the control center. The menu is accessed by pressing the upper side key (2). Rotating the button scrolls through menus. To return from an app or menu, swipe right or press the top side button (2). Sport mode can be accessed directly by pressing the lower lateral key (3).

Sports activities

Sports activities
There are 108 sports pre-programmed in the Sports menu. You can call up the recording of the different sports by activating the corresponding menu item, or by pressing the lower side key (3). You can end running activities by pressing the upper side key (2 ).

Vital functions

By scrolling the menu and touching the respective menu item, the following measurements can be taken, and the result shown on the display and in the app: Heart rate, stress, blood pressure, step count, blood oxygen, sleep.

Note: You can activate all-day heart rate measurement in the APP. Lema monitors your heart rate data during exercise and everyday life. The watch may occasionally not receive a suitable heart rate signal. In this case, the missing heart rate data is indicated by a dashed line. Make sure you are wearing the smartwatch correctly. Turn on real-time heart rate monitoring to get the data.

Please note:
Wear the wristband about 2 cm above your wrist bone and make sure it is close to your skin. The measurement quality can be influenced by the following factors, among others:

Low blood flow
Tattoos
Backward movements
Application of creams
Dirty sensors

Note: Due to the optoelectronic pulse measurement (photople thy smography) where your blood flow is detected by green LEDs and photodiodes, Lema also shows values if the wristband is worn too loosely or not at all. Therefore, make sure the wristband fits properly for pulse measurement.

CAUTION: This is not a medical device: data from the pedometer, pulse, blood pressure and oxygen saturation functions are not suitable for medical use.

Sleep

When you wear the watch while sleeping, your sleep stages are automatically recorded. Sleep duration, deep sleep and light sleep are displayed on the watch. Additional sleep data can be viewed in the app.

Note: Sleep is recorded if the time of falling asleep is between 22:00 and 06:00, sleep is longer than 4 hours and the smartwatch is permanently connected to the smartphone via Bluetooth. The wristband should not be removed directly when getting up.

Phone functions

The smartwatch offers various functions for telephony, which you can use after successful connection with the smartphone. Calls and voice commands to assistants are made directly via the watch.

Numeric keypad
Contacts (after synchronization with smartphone)
Call list
Voice assistant

Notifications

Incoming notifications can be displayed directly on the smartwatch. You can set which notifications should be displayed on the watch in the app.

Settings

Here you can make various settings for the smartwatch.

Control Center

The following settings can be made via the control center: Sound playback – Always-On – Alarm clock – Brightness – App QR code – Settings – Do not disturb mode.

If your smartwatch and smartphone are connected and within range of each other, the following menu items are available, among others:

Music
Camera
Weather
Timer
World Clock
Stocks
Search
Alarm Clock
Stopwatch
Calculator
Calendar

Warranty

The battery is subject to a warranty period of 6 months.
A warranty claim is void in the following cases:
(A) Unauthorized disassembly, modification, etc.
(B) Damage caused by external influences.
(C) Negligently caused defects (such as water damage outside the IP standard, external force, scratches).
If you want to make a warranty claim, you must attach a proof of purchase showing the date of purchase.
Due to product improvements, the actual product may differ slightly from this printed manual, this does not constitute a defect.

If you need technical support, please contact our support team at
https://support.fontastic.eu

Safety Instructions

Never open the device.
Never use the device if it has visible damage.
The device is splash-proof according to IP68.
For more information on water resistance, please visit our website at www.fontastic.eu.

Main functions

Health data: 24hr continuous heart rate monitoring, blood pressure, blood oxygen, sleep monitor, menstruation reminder.
Support 108 sports and workout modes
Daily records: Pedometer, distance meter, calorie counter
Time function: clock/ alarm/ reminder function
Activation of the screen when turning the wrist
Smart control: camera, music playback.
Phone functions, incoming call reminder.
Intelligent message reminders.
Support for multiple languages
OTA update
Charging method: USB cable with wireless charging pad.
Rotating crown to scroll through menus
Supports one-button access to sport modes

Specifications

Screen: 1.43“ (466 x 466) AMOLED | Always-On display.
Screen brightness: 450cd/M²
Display IC: ICNA3311
Touch control IC: CHSC5816
MCU: AC7012A6S (2 in 1 chip) dual core/2*192MHz/60Hz
BT version: BT 5.3 + BT 3.0
Heart rate sensor: VC9201+VP60A
RAM: 640KB + ROM 128Mbit
Built-in speaker
Integrated Microphone
G-Sensor
Rotatable crown
Battery: 300mAh
Charging time: 3 hours
Operating time: 5~7 days
Standby time: 20 days
Splash water protection: IP68
aterial: Zinc alloy main body
Dimension: 46.3 x 13mm

FAQ

If you have any questions about the product or the app, please refer to the FAQ section on our website at www.fontastic.eu/faq or scan the QR code.

We hereby declare that this device bears the CE- marking in accordance with the regulations and specifications. It therefore complies with the essential requirements of the RED Directive 2014/53/EU, as well as the RoHS Directive 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following address: www.fontastic.eu/Konfo

Note on environmental protection

From the date of transposition of the European Directive 2012/19/EU into national law, the following applies: Electrical and electronic equipment must not be disposed of with household waste. The consumer is legally obliged to return electrical and electronic equipment at the end of its service life to the public collection points set up for this purpose or to the point of sale. Details are regulated by the respective national law. The symbol on the product, the instructions for use or the packaging indicates these regulations. By recycling, material recovery or other forms of recovery of old appliances, you are making an important contribution to protecting our environment.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks is under license. Registered trademarks are the property of their respective owners. Improvement and changes of the technical specifications and other data’s could be made without prior notice. Fontastic, by D-Parts GmbH Birkenweiher Str. 16 63505 Langenselbold, Germany www.d-parts.de