SCOPREGA GE BP-1 Electric Inflator Instruction Manual

SCOPREGA GE BP-1 Electric Inflator

Product Information: GEBP-1 Electric Pump

The GEBP-1 Electric Pump is a portable and easy-to-use device designed to inflate and deflate various inflatables, including air beds, pool toys, and inflatable boats. The pump has a 12V DC power supply and can deliver a maximum pressure of 1200 mbar with a flow rate of 160 liters per minute. It comes with a long inflation hose, two switches for on/off operation, a pressure setting knob, and two power cables with cigarette lighter plugs and crocodile clips for easy connection to vehicle batteries.

Technical Specifications

• Article: GEBP-1
• Voltage: 12V DC
• Flow rate: 160 L/min
• Maximum pressure: 1200 mbar
• Current consumption: 13A

Safety Rules

Before using the GEBP-1 Electric Pump, please read and follow these general safety rules:

1. Always consider the working environment. Do not expose the pump to rain or use it in the presence of flammable liquids or gases.
2. Avoid unintended starts. Do not start the pump with the inlet in contact with dust or water.
3. Check for damaged parts. Before using the pump, make sure that all external parts are intact and the pump operates normally.

Product Usage Instructions

1. Connect one of the power cables to the cigarette lighter socket in your vehicle or to a 12V battery using the crocodile clips.
2. Insert the inflation hose into the valve of the inflatable object that you want to inflate or deflate.
3. Turn on the pump using one of the switches. The pump will start working and deliver air into the object.
4. Adjust the pressure setting knob to reach the desired pressure level. The pump will automatically stop when the set pressure is reached.
5. Turn off the pump using the switch and remove the inflation hose from the valve.
6. Store the pump in a dry and safe place after use.

Troubleshooting

If you encounter any problems with the GEBP-1 Electric Pump,please refer to the following table for possible causes and solutions:

cable connection and ensure it is properly
inserted
The pump does not inflate the object| The inflation hose is not connected properly or there is an
incorrect pressure setting| Check the hose connection and adjust the pressure setting
knob

FUNCTIONAL DESCRIPTION

GE BP-1

1. INFLATION HOSE
2. SWITCHES (ON-OFF)
3. PRESSURE SETTING KNOB
4. INFLATION PORT (OUT)
5. CABLE WITH CIGARETTE LIGHTER PLUG
6. CABLE WITH CROCODILE CLIPS

FOREWORD

Dear customer,congratulations on choosing Scoprega.
We design and manufacture products of the highest quality to meet the needs of our customers Scoprega offers the highest quality in service as well. Our
specialised departments provide support and instructions when needed, as well as comprehensive technical service.

We thank you for your trust.

WARNING
Read these instructions before using the inflator. Failure to follow all the instructions listed below may result in damage to the product and/or cause serious injury to persons.

PRELIMINARY WARNINGS

1. Read these instructions.

2. Keep this manual.

3. Thoroughly follow the instructions.

4. Protect the power cable against possible damage.

5. For servicing, contact qualified personnel only.
   In the event of problems or damage to the inflator, contact the service centre.

6. Do not disassemble the device. Incorrect reassembly can result in short circuits.

7. Ensure adequate ventilation and avoid placing objects on or around the inflator during operation.

8. Do not block the air vents.

9. The inflator produces vibrations that could make it move. Do not place the device on high surfaces and monitor its movements.

10. Do not use the inflator with adapters other than those provided in the package since they could damage the device.

11. Keep the device out of the reach of children.

DO NOT POWER THE INFLATOR WITH A DO NOT POWER THE INFLATOR WITH A VOLTAGE HIGHER THAN THE RATED ONE.

INTRODUCTION
The GE BP-1 is a high-efficiency portable electric inflator, which stands for reliability and functionality.
It is equipped with an inflation system allowing inflation at a pressure between 10 and 1200 mbar, and with a control system ensuring automatic shut- down at the selected pressure.

RECOMMENDED USES
SUP

Product TECHNICAL SPECIFICATIONS

ITEM| VOLTAGE

(V)

| FLOW RATE

(L / minute)

| MAX. PRESSURE

(mbar)

| POWER CONSUMPTION (A)| FUNCTIONS
---|---|---|---|---|---
GE BP-1| 12 Vdc| 160| 1200| 13| INFLATION

GENERAL SAFETY RULES

1. ALWAYS TAKE INTO ACCOUNT THE WORKING ENVIRONMENT.
   Do not expose the inflator to rain. Do not use in the presence of flammable liquids or gases.

2. AVOID UNINTENTIONAL START-UPS.
   Do not start the inflator with the inlet in contact with dust or water.

3. CHECK THAT THERE ARE NO DAMAGED PARTS.
   Before using the inflator, make sure that the external parts are intact and that the inflator works as described.

4. DO NOT USE the inflator near flammable liquids or in gaseous or explosive atmospheres. The inflator motor produces sparks that can ignite fumes.

5. DO NOT INHALE!
   The compressed air coming from the inflator is not clean. Never inhale air from the inflator or from a breathing device connected to the inflator.

6. WARNING! RISK OF EXPLOSION.
   Inflate to the pressure recommended by the inflatable manufacturer. An excessive pressure can cause a burst dangerous to people.

7. NEVER LEAVE THE DEVICE UNATTENDED.
   An excessive pressure can cause a burst dangerous to people.

8. WARNING! RISK OF MALFUNCTIONING.
   Do not modify or attempt to repair the device. Do not perforate the casing or make any changes to the inflator or its parts.

9. WARNING! RISK OF FIRE.
   Allow the inflator to cool down for 10 minutes after using it for 20 minutes max. A prolonged use can cause overheating and damage the product.

10. Never handle the pump using the hose or cable.

11. BE CAREFUL.
    Care must always be taken. Use common sense.

USE AND OPERATION

OPERATION AND INFLATION

1. Select, among the various fittings supplied, the suitable adapter engaging inside and opening the valve of the inflatable structure.
2. Fit the selected adapter inside the fitting by inserting it on the hose end.
3. To connect the hose, screw it on the inflation port (OUT).
4. Select the desired pressure by turning the setting knob until reaching the desired value.
5. Connect the inflator to the power supply using the cables provided.
6. Press the start button (ON).
7. Once the set pressure is reached, the inflator switches off automatically.
   The inflator can be stopped at any time by pressing the stop button (OFF).

NOTE
The inflator is equipped with a plug for the car cigarette lighter and also with an adapter with crocodile clips for the direct connection to the 12 Vdc battery.

WARNING
In case crocodile clips are used, make sure of the correct polarity (red clamp connected to battery positive terminal).
Otherwise the inflator will not start.
Do not run the inflator for more than 20 minutes and then let the unit cool down for 10 minutes before using it again.
When the device is under pressure, never turn the pressure knob or the pressure gauge ring counter-clockwise. This would cause the immediate breakage of the instrument.
Take into account the maximum inflating pressure suitable to the object to be inflated. Always set the maximum recommended pressure using the pressure knob or the pressure gauge ring. Do not over inflate.
Protect from sand, keeping the inflator inside the supplied bag: any sand entering the inflator can cause it to jam.

ACCESSORIES
The accessories recommended for your inflator are available from your dealer or authorised service centres.

WARNING
The use of any accessory not recommended for this inflator can be dangerous.

Product TROUBLESHOOTING

power cable correctly and with the right polarity (red clamp to battery positive terminal).
No battery voltage.| Check battery conditions.
The ON button has not been pressed.| Press the ON key.
The device is damaged| Contact a SCOPREGA service centre.
The inflator does not inflate| Hose wrong connection.| Connect the air hose to the correct port.
Wrong pressure setting.| Correct pressure setting.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>