myCharge AO10KF Recharging Power Hub User Guide
- July 14, 2024
- myCharge
Table of Contents
myCharge AO10KF Recharging Power Hub
Specifications
- Model: AO10KF-QSG
- Ports: USB-C, USB-A
- LED Indicators: 4 solid, non-blinking LEDs
- Warranty: One-year limited warranty
Product Usage Instructions
Recharging PowerHub
- Pull out the built-in wall prongs.
- Plug the PowerHub into a wall outlet.
- The unit is fully charged when all 4 LEDs are solid and not blinking.
LED Indicators
Press the power button to check the battery level indicated by the LEDs.
Charging Devices
The PowerHub features USB-C and USB-A ports for charging your devices.
Simply connect your devices to the ports using the appropriate cables.
Safety and Warranty Information
Ensure to read all instructions and warnings before using the product to
prevent any potential hazards. Register your product on
mycharge.com to avail of the one-year limited warranty.
Failure to register or provide proof of purchase may void the warranty.
FAQ
-
Q: What should I do if my product is not charging devices?
- A: Check if the wall prongs are properly plugged into the outlet and ensure that the PowerHub is fully charged. If issues persist, contact MyCharge support for assistance.
-
Q: How can I extend the lifespan of my PowerHub battery?
- A: Avoid overcharging your devices with the PowerHub and store it in a cool, dry place when not in use to maintain battery health.
POWERHUB QUICK START GUIDE
RECHARGING POWERHUB
Pull out the built-in wall prongs and plug into wall outlet. Fully charged
unit shows 4 solid, non-blinking LEDs.
LED INDICATORS
Press power button to see battery level
CHARGING DEVICES
Pull out the built-in USB-C or Lightning® cable and plug into device.
Charging should begin automatically – if it doesn’t, press the power button.
Charges 4 devices at once
- 2 via built-in cables
- 2 more via USB ports
SAFETY AND WARRANTY INFORMATION
WARRANTY INFORMATION : At myCharge, we’re dedicated to making the highest
quality products possible. In that, we provide a one-year limited warranty
from the date of purchase. Keep a copy of your receipt as proof of purchase
and register your product at mycharge.com and check for
the latest product updates as they develop. Failure to register your product
and/or to provide proof of purchase may void the warranty.
Warranty Instructions and Information visit:
mycharge.com/warranty and select your model.
MYCHARGE SUPPORT : support@mycharge.com
WARNING: Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which myCharge is not responsible.
- Do not expose Powerbank to heat sources, extended direct sunlight or other high-temperature environments.
- Do not expose Powerbank to extended low-temperature environments.
- Do not drop Powerbank and protect Powerbank from outside impact of any kind.
- Do not disassemble, attempt to repair or replace any part of the housing or Powerbank.
- Do not attempt to charge the Powerbank using any method, apparatus, or connectors other than those provided with the Powerbank.
- Never dispose of batteries in the garbage. This is unlawful under state and federal environmental laws and regulations. Always take used batteries to your local battery-recycling center.
PROP 65 WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects and other reproductive harm.
FCC COMPLIANCE
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This Powerbank has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This Powerbank generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by myCharge could void the user’s authority to operate this equipment. myCharge is a registered trademark of RFA Brands, LLC. ©2024 myCharge. All Rights Reserved.