beper P101FRI100 Electric Deep Fryer Instruction Manual

June 10, 2024
beper

beper P101FRI100 Electric Deep Fryer

beper-P101FRI100-Electric-Deep-Fryer-product-image

Product Information: Electric Deep Fryer

The Electric Deep Fryer by Beper is designed for home use and has a power rating of 850-950W with an input voltage of 220-240V~50Hz. The fryer has a non-stick interior coating and comes with a removable basket for easy cleaning. The fryer also has an adjustable thermostat to regulate the temperature and a temperature indicator light to notify when the desired temperature is reached. The fryer has a capacity of up to 2.5 liters of oil or molten fat.

Product Usage Instructions

  1. Before use, ensure that the fryer is placed on a stable, level surface and that the oil level is between the minimum and maximum indicators.
  2. Insert the power cord into a suitable electrical outlet and switch on. The power indicator light will turn on.
  3. Adjust the temperature using the temperature control knob to the desired temperature. The temperature indicator light will turn on, indicating that the fryer is heating up.
  4. Once the desired temperature is reached, proceed to add the food to the basket and lower it into the oil.
  5. Cook the food for the recommended time (refer to the table in the manual for cooking times).
  6. Once cooking is complete, turn off the temperature control knob and unplug the power cord from the electrical outlet.
  7. Wait for the oil to cool before removing it from the fryer for disposal.
  8. Clean the fryer after each use by wiping it down with a damp cloth. Do not immerse the fryer in water.

Please note that children and inexperienced individuals should not be allowed to use the fryer unsupervised. If the fryer requires technical assistance, please contact the seller or the manufacturer’s customer service for repair. Any unauthorized tampering with the fryer will automatically void the warranty.

Precautions
Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from impro-per, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over.
Close supervision is necessary when any appliance used by or near children.

Security and use advice
This appliance has been manufactured for frying food, only for domestic and household use, and does not be used for other purpose, cannot be modified or badly manipulated.
Do not switch on the fryer if damaged; contact the manufacturer or the assistance service authorized by the manufacturer.
Plug the fryer only to a wall socket making sure that is earthed. Before use, make sure that the mains voltage corresponds to the data specified on the rating label of the fryer.
Do not pull on the cord to unplug it from the socket.
The cord must not touch or be near hot parts of the fryer, heater source or cutting angle.
Do not place the fryer near heater source or water.
Do not let the cord pending from the surface where the fryer is placed thus that could be reached by children or avoid good use movement. Before use, completely clean every parts of the fryer.
Make sure that they will be completely dry before filling with oil or fat. Always respect the MIN and MAX level marked on the oil container. When using it the fryer is hot, do not touch external parts of it.
Do not put the hands on the filter when the fryer is on, the oil steam can be very hot.
When using it, some hot steam can come out from the fryer or when open the lid, make sure not to burn yourself and keep hands and face away from the steam.
Do not move the fryer when hot oil is inside to prevent from serious burns. The fryer can be moved only when it is cooled.
Keep away from children.
The fryer can be used only when the oil tank is full of oil or molten fat. Only use oils or fat recommended for fryer (read carefully indications on oil bottle).
Oil and fat are flammable substances, unplug immediately the cord from the socket in case of fire.
Unplug the fryer from the socket outlet for cleaning or if not used. Empty the oil tank only when the fryer is cooled.
After use, set switch temperature OFF and unplug the fryer from the socket. Let it cool down.

Description

beper-P101FRI100-Electric-Deep Fryer-1

  1. Operation indicator light
  2. On/off switch and temperature setting knob
  3. Non-stick container
  4. Oil MIN and MAX level mark
  5. Reaching temperature indicator light
  6. Lid
  7. Filter
  8. Non-slip feet
  9. Cord supply
  10. Basket
  11. Removable basket handle

Instruction for use

When using the fryer for the first time, clean carefully with hot water and liquid soap basket and container. The fryer body may be cleaned with a wet cloth. Make sure that water will not enter into the control panel and that there will be no residue on the bottom of the tank.
Dry carefully all the parts.
Place the fryer on a horizontal and stable plane surface.

Filling tank with oil or fat
If using oil, pour oil into the tank until the maximum level indicated on the oil container wall. Do never exceed this limit, to avoid any risk of overflow of oil or fat of the container. The oil level must be always between the two marks on the oil container wall.
Do never mix 2 different types of oil or fat.
If using hard fat, cut it and make it melt into another container before pour it carefully into the fryer container. Never attempt to melt fat into the fryer container.

Pre-heating
Plug the cord into the socket, the operation indicator light turns on.
Select the desired temperature by using the appropriate knob and the reaching temperature indicator light will turns on.
Once the set temperature is reached, the reaching temperature indicator light turns off.

Frying
Put the food into the basket, making sure the basket handle is correctly inserted on the basket.
Lower the basket into the oil slowly in order to prevent from hot oil splashes or overflow.
The oil must always cover the food.
It is normal for a significant amount of steam to come out.
Remove the handle from the basket and close the lid.
When the food is cooked, it is possible to control through the window of the lid, lift the lid and be aware of the very hot vapour that could escape; place the handle on the basket. Lift the basket in order to drain food and fix the basket on the appropriate support on the body fryer . If necessary, it is possible to shake the basket carefully above the fryer container to drain the fried food.
To carry on with frying, empty the basket and repeat the operations mentioned above by taking care of time coo-king that will be different of the first one because the oil is already hot. Always wait for the temperature indicator is off (the oil is at desired temperature).
When cooking is over, switch off the fryer by turning the setting knob on OFF position. Unplug the power cord from the socket.
Wait for the oil is completely cooled before moving or cleaning.

Frying
Do not overfill the basket, this will cause the oil temperature dropping and make the food greasy.
The oil must always cover the food.
If necessary, remove ice from frozen food before frying; then lower slowly the basket into boiled oil to avoid splashes.
Cut pieces of food of equal dimension in order to fry them correctly. The food must be perfectly dry before low then into oil/fat to avoid splashes. Before frying food that contains “water” (fish, meat, vegetables…) it is recommended to put them into bread or flour, taking care to remove excess bread or flour before immersing them in the oil / fat.
Consult the following table bearing in mind that cooking times and temperatures are approximate, they must be adjusted according to the quantity and personal taste.

Food Temperature °C Cooking time (minutes)
Pre cooked frozen fries 170° 6-9
Fresh fries 180 12-15
Fish 160° 5-6
Hake fish 180° 6-8
Shrimps 160° 6-8
Sardines 170° 8-12
Chicken pieces 170° 12-15
Breaded lamb chops 170° 8-10
Pork ribs 170° 8-10
Mushrooms 140° 4-6
Oignons 150° 3-4
Vegetables fritters 180° 6-8
Apple fritters 170° 4-6

Suggestions
Regularly change oil or fat. Do never add new oil/fat to oil/fat already used.
The oil/fat damages its properties when used for so long. Bread, for example, may make the oil dirty.
Do not keep the oil of fat at high temperature for so long, this will make it lose its properties. It is recommended to change completely oil frequently.
It is recommended not to keep oil into the fryer container for long periods.
Often clean the fryer with absorbing paper.

Care and cleaning

Before cleaning the fryer unplug the cord from the socket an wait until oil is completely cooled to prevent from burns.
Empty the oil from the non-stick container ; remove residue with a sponge or absorbing paper of kitchen. Pour some hot water and wash liquid into the container and let work for 30 minutes ; wash the container with spatula used for non-stick surfaces or a soft sponge. Empty the tank and rinse it carefully with water.
Wash the basket with hot water and wash liquid. Wash the body and the lid with a soft and wet cloth.

Well dry all the parts.
Do not use abrasive sponge in order to protect the fryer container.
Do never immerge the fryer into water or put it under water flow.

Technical data

  • Power 850-950W
  • Power supply 220-240V ~ 50Hz

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

  • The appliance has been used properly and for the purpose for which it has been intended.
  • The appliance has not been tampered with, otherwise it is not maintainable.
  • The purchase receipt shall be presented.
  • The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product
Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward your enquiries to your distributor.

BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019
beper.com

CUSTOMER CARE BEPER

Documents / Resources

| beper P101FRI100 Electric Deep Fryer [pdf] Instruction Manual
P101FRI100 Electric Deep Fryer, P101FRI100, Electric Deep Fryer, Deep Fryer, Fryer
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals