Char-Broil 463631504 Gas Grill Instruction Manual
- July 16, 2024
- Char-Broil
Table of Contents
Char-Broil 463631504 Gas Grill
Specifications
- Model: Charbroil 463631504
- Parts Included: Leg Assemblies, Front Panel, Side Support Brace, Carriage Bolts, Tee Knobs, Grill Lid, Handle, Logo Plate, Metal Wing Nuts, Hinge Pins, Hitch Pins
- Number of Models: 3592
Product Usage Instructions
Assembly Instructions:
Leg Assembly:
- Lay leg assemblies on their sides.
- Place front panel on legs.
- Attach braces to the inside of legs.
- Secure with carriage bolts and tee knobs.
Cart Assembly:
- Stand cart upright.
- Ensure ignitor wire is connected to the ignitor.
- Place grill bottom onto supports with control panel overlapping front panel.
- Secure with carriage bolts and wing nuts.
- Press control knobs onto valves.
Grill Lid Assembly:
- Attach lid to grill bottom with hinge and hitch pins.
- Attach handle to lid with two metal wing nuts.
- Snap logo plate into the lid.
Frequently Asked Questions
How many models of Charbroil grill parts are available?
There are 3592 models available for selection.
What should I do to prevent scratching during assembly?
Lay the grill on packing material to prevent scratching during assembly.
Parts to assemble: 2 Leg Assembly 1 Front Panel 2 Side Support Brace 4 Carriage Bolt, 2″ 4 Plastic Tee Knob
A. Lay leg assemblies on their sides. B. Place front panel on legs. C. Braces
attach to inside of legs. D. Secure with carriage bolts and tee knobs.
Front Panel
Leg Assembly
Qty. 4 Qty. 4
Side Support Brace NOTE: To prevent scratching, lay grill on packing material to assemble.
4
Parts to assemble: 1 Grill Bottom Assembly 4 Carriage Bolt, 1¼” 4 Metal Wing
Nut 2 Control Knob
A. Stand cart upright. B. Make sure ignitor wire is connected
to ignitor. C. Place grill bottom onto supports. Control
panel overlaps front panel. D. Secure with carriage bolts and wing nuts. E.
Press control knobs onto valves.
Qty. 4
Ignitor Wire
Grill Bottom Control Knobs Control Panel
Qty. 4
7
Parts to assemble: 1 Grill Lid 1 Handle 1 Logo Plate 2 Metal Wing Nut 2 Hinge
Pin 2 Hitch Pin
A. Attach lid to grill bottom with hinge and hitch pins.
B. Attach handle to lid with two metal wing nuts.
C. Snap logo plate into lid.
Logo Plate
Handle
Grill Lid
(Lid style may vary)
References
- Repair Your Grill: Shop Replacement Parts for 24,880 Models
- Charbroil Grill Parts - Select From 3617 Models