Dextra Recessed Tether Kit Installation Guide
- June 10, 2024
- Dextra
Table of Contents
Dextra Recessed Tether Kit Installation Guide
-
Attach tether bracket using the M6 taptite screw provided. There are 5.5mm holes provided in the corners of the luminaire body. If not available, it is permissible to drill a 5.5mm hole to accept the bracket. The 5.5mm hole may be covered with a white label which can be removed if necessary.
-
Using the suspension wire provided, pass the tether over a suitable suspension point in ceiling (purlin or suitably rated eyehook etc.) and feed the free end through the loop end. Pull tight to secure to ceiling.
-
With the suspension gripper attached, pass the free end through the bracket on the luminaire and feed back through the gripper. Pull tight to take up the slack in the suspension wire.
-
Repeat in opposing corners if multiple tethers are required.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>