QCY-T17 True Wireless Earbuds User Guide

June 9, 2024
QCY

QCY-T17 True Wireless Earbuds

Overview

QCY-T17-True-Wireless-Earbuds-fig- \(1\)

What’s in the box

QCY-T17-True-Wireless-Earbuds-fig-
\(2\)

Wearing

QCY-T17-True-Wireless-Earbuds-fig- \(3\) QCY-T17
-True-Wireless-Earbuds-fig- \(4\)

Choose the EarTips that fit your ears best.

  • Step 1 : Ensure sounds hole downward, then place earbuds Into ear.
  • Step 2 : Rotate earbud back to auricle side to fit snugly.

Pairing

QCY-T17-True-Wireless-Earbuds-fig- \(5\)

When using for the first time:

  1. Activate the earphone by removing them from the charging case and putting them back.
  2. Remove the earphone from the charging case again, they will switch on automatically and pair with each other.
  3. Select MQCY-T11 on your device’s Blue tooth list to connect.
  4. When successfully connected, the LED indicators will pulse blue.

BUTTON CONTROLS

QCY-T17-True-Wireless-Earbuds-fig-
\(6\) QCY-T17-True-Wireless-Earbuds-fig-
\(7\)

X2: Tap Twice X3: Tap Triple 1.5″: Press and hold for 1.5 seconds

LED Light

QCY-T17-True-Wireless-Earbuds-fig-
\(8\) QCY-T17-True-Wireless-Earbuds-fig-
\(9\)

Earphone

  • Power on
  • Charging
  • Full charge

Charging compartment

  • Low power
  • Charging
  • Full charge
  • Reset

Charging

QCY-T17-True-Wireless-Earbuds-fig- \(12\) QCY-T17-True-Wireless-Earbuds-fig- \(13\)

  • Fully dry off the earbuds and the USB port before charging.
  • Remove the protective film before charging.
  • To prevent damage, use the provided USB-C cable.

POWERING ON/OFF

QCY-T17-True-Wireless-Earbuds-fig-
\(14\) QCY-T17-True-Wireless-Earbuds-fig-
\(15\)

  • Take the earbuds out of the charging case to power on.
  • To power off, place the earbuds in the charging case and close it.

Factory ResettingQCY-T17-True-Wireless-Earbuds-fig-
\(16\)

Reset If the earbuds cannot properly pair with each other or with other devices.

  1. Place the earbuds into the charging case and leave the case open.
  2. Press and hold the button on the case for 10 seconds until the LED indicators inside the charging case rapidly flash white 5 times. This confirms that the reset was successful and your earbuds can be connected normally.

Customer Service

  • 12-month limited warranty
  • Lifetime technical support
  • Our warranty is additional to the legal rights consumers have buying this product.

FAQ

View the FAQs on QCY-T17-FAQ

How to care for your earbuds

  1. Do not disassemble. Avoid Dropping.
  2. Use original or certified cables.
  3. Keep away from children or pets. Small parts included may be a choking hazard.
  4. The earbuds need to be fully charged before first-time use. If you do not use it for more than 2 months, please charge and maintain it regularly for safe operation.
  5. Do not put it under extreme temperatures, such as below 1 O degrees Celsius or above 60 degrees Celsius.
  6. Do not expose the product to strong sunlight fire or throw it into the fire to avoid an explosion
  7. Do not use the product outdoors during thunderstorms to avoid malfunction or electric shock.
  8. Do not use chemicals or strong detergents to clean the earbuds

Manufacturer : Hele Electronics Co., Ltd.
Add : No. 325, Yuehui Road, Daojiao Town, Dongguan City, Guangdong Province, China

Thank you for purchasing the QCY authentic product. For any assistance, please contact us freely:
hello@qcy.com
tech@qcy.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals