VORDON HT-202 Car Radio AUX-USB-BT-SD Hint User Manual
- June 9, 2024
- VORDON
Table of Contents
VORDON HT-202 Car Radio AUX-USB-BT-SD Hint
Connection diagram
User Interface
Device installation
The car radio connection diagram is presented on the first page of this
manual. The radio is equipped with a standard ISO connector,
but due to the individual cable routing in various car models and the level of
installation complexity, we recommend that the car radio is connected by
qualified personnel.
Starting and shutting down the device
To start the device, press the “On/ M” button when the ignition is on. To turn
off the device, press the button again for at least 2 seconds.
The main interface of the device
When you turn on the radio, the last used play mode will automatically start.
Press the selected button to go to a previously saved radio frequency, change
the play mode or answer a phone call in hands-free mode.
On the right side, behind the cover, is a panel with popular sockets for
playing your favorite media.
General control
-
1. Rewind / Previous song
-
2. Button for starting the radio. When the radio is already running, use the button to cyclically change the media source mode, e.g.
FM Radio -> AUX -> USB -> SD -> BT -
3. Fast forward / next song
-
4. Knob to control volume and menu settings
-
5. Mute- mute
-
6. Equalizer – settings
-
7. Stored frequency no. 1 / Play & Pause
-
8. Preset frequency# 2 / Song Intro
-
9. Stored frequency no. 3 / Repeat
-
10. Recorded frequency No. 4 I Shuffle
-
11. Recorded frequency# 5 / 10x Backward
-
12. Stored frequency No. 6 / 10x Forward
-
13. AUX – port for connecting external devices via AUX
-
14/15 / 16th place for connecting external media
-
17. Reset
-
18. Built-in microphone
-
19. VA-LCD display of the car radio
-
20. IR receiver for the remote control
-
21. Clock settings
-
22. Searching for stations/ changing band/ answering calls
-
23. Antenna socket
-
24. Stereo output jacks
-
25. Fixing hole
-
26. Power socket and speaker connections
-
27. Fuse
Precautions
- Read the instructions for electrical connection carefully. If it is done incorrectly, the car stereo will be damaged.
- If possible, installation of the car stereo should be performed by a specialist.
- Do not subject the device to physical impact.
- Insulate any exposed cables to avoid a short circuit.
- After installation is complete, fix any loose cables.
- The car stereo is designed to operate with a negative ground connection. Check that the car is equipped with this type of electrical system.
- Connect the car stereo according to the connection diagram, otherwise it will not function properly and may be damaged.
- Be sure to connect the speakers correctly, otherwise you may damage both the speakers and the amplifier.
- Avoid contact of the device with sources of electromagnetic radiation.
Importer:
ArmareS.A.
ul Grzybowska 87, Warszawa, Polska
Designed by Vordon in Europe, produced in China
DISPOSAL
Electrical and electronic devices as well as batteries and accumulators must
not be mixed with other household waste. This is indicated by the symbol of
the crossed out basket on the packaging. Worn-out electric and electronic
equipment as well as batteries and accumulators should be delivered to local
separate waste collection points or to the seller, and for details inquire in
your commune. Electrical and electronic equipment as well as batteries and
accumulators may contain hazardous substances, mixtures and components harmful
to the environment and human health. Improper handling or damage to them may
lead to health damage or environmental pollution during further disposal or
recycling of the equipment.
Armare S.A. hereby declares that the Vordon device complies with the European
Directive RE 2014/53 /EU.The full text of the Declaration of Conformity is
available at the following internet address:
www.vordon.pl/declarations