YOCUNKER K13B 3in1 Fast Wireless Charger Instruction Manual
- June 3, 2024
- YOCUNKER
Table of Contents
YOCUNKER K13B 3in1 Fast Wireless Charger Instruction Manual
Thank you very much for purchasing our product.
We’d love to serve you at our best,at the same time we kindly advise you to
read this manual in detail and maintain. It carefully for a better and longer
use experience.
Product Configuration
3 in 1 wireless charger,one instruction
Structure and installation mode
Connect the wireless charging USB power cord before use.Use 9V/3A charger to achieve the best charging effect.
Power up:Blue light on for 3 seconds.
No load:Off.
Phone charging:Blue light on,extinguished after full.
Abnormal status:Blue light flicker.
Performance Parameter
Name：3 In 1 Wireless Charger
Model：K13A
Colour：Graphite color
Input：5V/3A,9V/3A
Output：Phone：5W/ 7.5W/ 10W/15W(MAX）
TWS：5W（max)
Watch：3W(max）
Matters Needing Attention
- To achieve the best charging effect, please use the 9V/3A charger.
- Connect the USB power cord to the charger before using it(no charger is included in this standard.
- The protection case of devices need to be less than 3mm,or it may affect the charging efficiency. Cases made of metal,attachments such as magnets, cards,grips will interfere with charging.
- Make sure that the mobile phone supports Ql wireless charging function.
Thank you very much for purchasing our product.
We’d love to serve you at our best,at the same time we kindly advise you to
read this manual in detail and maintain. It carefully for a better and longer
use experience.
Product Configuration
3 in 1 wireless charger,one instruction
Structure and installation mode
Connect the wireless charging USB power cord before use.Use 9V/3A charger to achieve the best charging effect.
Power up:Blue light on for 3 seconds.
No load:Off.
Phone charging:Blue light on,extinguished after full.
Abnormal status:Blue light flicker.
Performance Parameter
Name：3 In 1 Wireless Charger
Model：K13B
Colour：Graphite color
Input：5V/3A,9V/3A
Output：Phone：5W/ 7.5W/ 10W/15W(MAX）
TWS：5W（max)
Watch：3W(max）
Matters Needing Attention
- To achieve the best charging effect, please use the 9V/3A charger.
- Connect the USB power cord to the charger before using it(no charger is included in this standard.
- The protection case of devices need to be less than 3mm,or it may affect the charging efficiency. Cases made of metal,attachments such as magnets, cards,grips will interfere with charging.
- Make sure that the mobile phone supports Ql wireless charging function.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and c an radiate radio frequency energy and, if not installed and used in accordance with the instructions , may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement
Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.