HOOVER 961003633-R1 SmartWash Cordless Carpet Cleaner User Guide

HOOVER 961003633-R1 SmartWash Cordless Carpet Cleaner

Product Information

Specifications

• Product Name: Cordless Carpet Cleaner
• Model Number: 961003633 R1

Product Usage Instructions

Getting Started

1. Insert the handle into the main unit until you hear a click, indicating proper insertion.
2. Follow the instructions on the brush roll cover to install it correctly.
3. Insert the battery into the unit until it clicks. Ensure that the battery is fully charged before starting.

Filling the Tank

Solution Water

1. Remove the solution tank from the product.
2. Open the flap on the tank and fill it with water up to the WATER line.
3. Next, fill the Hoover Solution up to the SOLUTION fill line.
4. Close the flap and reinsert the tank until it clicks into place.

How to Use

1. Step on the Handle Release Pedal to recline the unit into the cleaning position.
2. Locate and push the power button on the handle to start the machine.
3. Use the + and – buttons to switch between AUTO, SPOT, and DRY ONLY modes.

Use Modes

• WASH: Slowly push the machine forward, and it will automatically dispense water and solution. Then, pull it back to extract.
• SPOT: Toggle to SPOT Mode for heavy messes and stubborn stains.
• DRY ONLY: Use this mode to remove any remaining moisture in the carpet.

FAQ

Q: Where can I buy the Hoover Solution?
A: You can purchase the Hoover Solution from authorized retailers or online stores.

ONEPWR® SMARTWASH™
CORDLESS CARPET CLEANER

QUICK START GUIDE

GETTING STARTED

1. Insert handle into main unit. You will hear a click when inserted properly.
2. Install the brush roll cover according to instructions on brush roll cover.
3. Insert the battery until it clicks. Ensure battery is fully charged before starting.

FILLING THE TANK

1. Remove solution tank from your product.
2. First, open the flap and fill with water to the WATER line. Next, fill Hoover Solution to SOLUTION fill line.
3. Close the flap and reinsert tank until it clicks into place.

HOW TO USE

1. Step on the Handle Release Pedal to recline the unit into cleaning position.
2. Locate and push the power button on the handle to start your machine.
3. Use the + and – buttons to switch between AUTO, SPOT, and DRY ONLY modes.

USE MODES

• AUTO MODE
  Slowly push forward and the machine will automatically dispense water and solution. Then pull back and the machine will extract.

• SPOT MODE
  Toggle to SPOT Mode for heavy messes and stubborn stains.

• DRY ONLY MODE
  Used to remove any remaining moisture in the carpet.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>