QCY ArcBuds True Wireless Earbuds User Guide

June 9, 2024
QCY

QCY ArcBuds

True Wireless Earbuds

QCY ArcBuds True Wireless Earbuds A1

For better use experience,please scan to download QCY APP before start-up.

Overview

Choose Eartips
Please try medium eartips first as they fit most people.

QCY ArcBuds True Wireless Earbuds A2

  1. LED
  2. Touch panel
  3. Mic
  4. Pogo pins

Charging case                 Type-C cable      Eartips

Above pictures are for reference only and practical items may vary.

How to Connect

First Time Connection:

  1. Pick up both earbuds, pop them back in case then close lid to activate them.
  2. Open lid, pick up earbuds and they will auto power on. On phone, search “QCY ArcBuds” and tap to connect.

QCY ArcBuds True Wireless Earbuds A6

Factory Setting

Push earbuds into case, open lid and touch both panels 5 times to reset them to factory(LEDs will blink white 5 times).
Notes: After factory setting, pick up earbuds and they will auto pair with each other and turn connectable to phone.

QCY ArcBuds True Wireless Earbuds A7

Charging Earbuds

LED will glow solid red when earbuds are charged and turn white for 30s when topped up.

Charging Case

LED will blink white when case is charged and turn solid white when topped up.

How to Wear

QCY ArcBuds True Wireless Earbuds A8

  1. Please put on earbuds properly then adjust them to fit yourself.
  2. Set microphone towards your mouth.
  3. It will cause a bad calling or listening experience to wear them in a wrong way.

QCY ArcBuds True Wireless Earbuds A9

LED on Case

High battery level: LED turns on red for 4s
Low battery level: LED blinks red for 4s

Functions

QCY ArcBuds True Wireless Earbuds A10

  1. LED
  2. Touch panel
  3. Mic
  4. Pogo pins
  5. LED

Power-on: Open lid and pick up earbuds
Power-off: Push earbuds into case
Answer/end call: touch either panel
Ignore call: touching either panel for 1.5s
Skip track forward: Triple touch right panel
Voice assistant: Triple touch left panel
Playback/pause: Double touch left/right panel to play/pause
Gaming mode: Keep touching left panel for 1.5s
ANC mode: Keep touching right panel for 1.5s to switch among ANC, Normal and Transparency modes

Warranty Card

Warranty Period
12 months after you purchase this item (or you may inquire your local shopper for more details).
Free Service:
Supposing any defects caused by quality issues occur within the warranty period , please take this warranty card and purchase receipts to your distributor for free exchange service.

Model Number:

Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:

Free exchange service will not be accessed under following circumstances:

  1. Damages caused unauthorized disassembly.
  2. Defects or physical damages caused by leaking or dropping off.
  3. Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
FCC Statement

This equipment has been tested and found to comply with the imits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC ID:RDR-BH22HT07A

Tips

  1. Before using the earbuds, please read the manual carefully and keep it for future references.
  2. The earbuds need to be fully charged prior to first-time use.
  3. If the earbuds are left unused for over two weeks, please recharge.
  4. Please use the chargers made by qualified manufacturer.
  5. If earbuds fail to be found by phone, please re-turn them connectable or restore factory settings. If a program error of phone occurs, please turn off and on Bluetooth function or reboot the phone.

Caveats

  1. Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
  2. Do not store the earbuds in extreme temperatures (under 0°C or over 45°C).
  3. Avoid using the indicator close to the eyes of children or animals.
  4. Do not use the earbuds during a thunderstorm to avoid dysfunction and increasing risk of electricshock.
  5. Do not use harsh chemicals or strong detergents to clean the earbuds.

Note: please do not use earbuds for a long time as may damage your hearing.

Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province China

QCY ArcBuds True Wireless Earbuds Certi

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals