ICECO GO20 Dual Zone Portable Refrigerator User Manual

GO20 Dual Zone Portable Refrigerator
User Manual

GO20 White/Grey
Please email us at: Please email us at: [email protected]

What’s Inside

| Refrigerator x1
---|---
| 7 Feet 80W Universal AC Adapter x1
| 8 Feet 12/24V DC Cigarette Lighter Plug Cable x1

MODEL GO20 Series

Operation

2.1 Switched-on/off Power On
With your fridge plugged in, press and hold the A (Power) Button for 3 seconds.
Power Off
Press and hold the A (Power) Button for 3 seconds.
2.2 Fast Cooling Mode

With the fridge turned on, you can press the Button B to toggle between Fast and Normal cooling modes.
Under the fast cooling mode, the left bin will receive all of the fridge’s cooling power for the 1 15 minutes, and the right bin will maintain its current temperature during this period. Then when you switch back to the normal cooling mode, the right bin will go back to its set temperature.
**NOTICE : If the partition is removed from your fridge, it will function as a single zone unit, and only one temperature setting will become available.
2.3 Unlock Button**

With the fridge powered on, press and hold the Button C to unlock the fridge’s control interface.
The fridge will lock its control interface after 90 seconds of no control inputs, to prevent accidental changes from being made.
You can press and hold the Button C (Unlock) for 3 seconds to unlock the control interface.
2.4 Switch Between °C to °F In standby mode (fridge turned off but plugged into power), press and hold the Temp. Up and Down Buttons on display E (Right Compt.) at the same time for 3 seconds, and you should be able to toggle between Battery Protection Levels and C/F settings using the Button A.
The Battery Protection Levels are represented by 3 dashes on the display. There are 3 protection levels available and you can select it using the UP/DOWN Button on display.
**NOTICE: Details of Battery Protection Mode could be found in Page 16.
2.6 Off-Set Value**

In standby mode (fridge turned off but plugged into power), press and hold the Temp. Up and Down buttons on display D (Left Compt.) at the same time for 3 seconds, and you
should be able to switch between F1/F2/F3 off-set values for both compartments by pressing the Button A.
NOTICE: We do not recommend our customer to adjust the temperature off- set value unless necessary or there is an obvious temperature measurement deviation from actual temperature.
The following chart details the temperature zones each setting parameter affects, as well as their default values.

OFF-SET| FUNCTION| VALUE DEFAULTED
LEEF BIN| WHEN SHIPMENT
RIGHT BIN
---|---|---|---
F1| Set temperature≥0°C, temperature compensation value| -2°C
(28°F)| -3°C
(27°F)
F2| -1°C≥Set temperature≥-14°C, temperature compensation
value| -2°C
(28°F)| -3°C
(27°F)
F3| Set temperature≤-15°C, temperature compensation value| -1°C
(30°F)| -4°C
(25°F)

Care And Maintenance

3.1 Cleaning
Please use a wet cloth and warm water mixed with gentle non-abrasive detergents to clean the interior and exterior of your fridge.
3.2 DOs and DON’Ts

• Please power off and unplug the unit before cleaning
• Please use non-abrasive detergent to cleaning the interior/exterior of the fridge
• Please don’t scrap the interior of the fridge to defrost/de-ice the fridge
• Please don’t pressure-wash/spray the fridge with a running water hose

Error Codes & Solutions

mode is activated.
E2| The cooling fan overloads with more than 1A of current.
E3| Motor start error The motor of compressor is blocked or the pressure difference in the refrigeration system is too high.
E4| Minimum motor speed error
The compressor overloads and the motor can not maintain its minimun speed 1850 rpms.
E5| Thermal cut-out of electronic unit
Thermal cut-out error If the refrigeration system overloads, or the ambient temperature is too high, the thermal sensoris overheated.
E6| NTC failure Open circuit or short circuit.

Solutions

• If this error code appears when the fridge is operating on 12V DC, please try to lower the battery protection setting and see if the error is resolved. The battery protection mode may be triggered prematurely on certain vehicles due to small wiring imperfections, contributing to a measured DC voltage drop at compressor start-up. Lowering the battery protection setting may resolve this issue.
• Please also care about the reading of your battery voltage to make sure it is not depleted/discharged.
• If possible, please connect the AC power to try if the refrigerator appears error code.
• Please contact us directly if the error persists.

Warranty & Return Policy

• 30 days refund guarantee.
• 5 years Compressor Warranty.
• 1 year General Warranty.

For returns or exchanges, please fill out the following return and exchange registration form in the package as a proof of return. All materials must be returned in the original condition and packaging. Thank you for your cooperation.
If the product is received damaged or defective during transportation, you need to contact our customer service within 2 business days. Make sure to provide
relevant photos or videos, your order ID number and your name. A customer service agent will help assist into solving the issue at a timely manner. (Return, Exchange, or Discount Compensation) A free return label will be provided if needed.

Troubleshooting (Q & A)

1. Heat resistance & water resistance
Heat resistance
ICECO refrigerators are engineered to operate at an ambient temperature of up to 55 °C(131 °F).
Weather Proof
ICECO refrigerators can operate under light rain conditions. Please keep the vents above clear of water, and please add some clearances to the bottom of the fridge if the ground is wet.
We DO NOT recommend exposing the fridge to moderate or heavy rain.
As with all electrical appliances, over-exposure to moisture may shorten the fridge’s life.

2. How long can the ICECO refrigerator keep the temperature after powering off?
The following data only represented the result of the lab experiment with empty box. Everything is based on the actual situation.
Insulation Performance

(0°F) to 20°C (68°F) needs about 3 hours on average.

3. Why did it change back to the original temperature after setting the temperature?
The Solid/Non-Flashing number on the display is the CURRENT interior temperature.
The Flashing number is your SET temperature after adjustment. The compressor will shut off when the SET temperature is reached.
4. What should I do if the refrigerator is upside down when it is delivered?
Please leave your refrigerator upright for 24 hours to allow the compressor lubricant to resettle before powering on the fridge.
Otherwise it may contribute to certain operation abnormalities.
5. What is the function of triple battery protection? How do they work?
The triple battery protection is designed to prevent over-discharge and battery depletion.
When the measured DC voltage is below the set value, the compressor is shut off to prevent battery depletion.

For example, when you switch to a LOW MODE, the battery voltage is under 9.6 volts, the refrigerator will automatically cut the power OFF;
The refrigerator will start again till the battery voltage reached back to 10.9 volts.
6. What is the power draw in max/ fast cooling mode?

This data is only suitable for laboratory testing, and the actual power is subject to actual conditions.
7. Why is there a temperature difference (between the actual temperature of the refrigerator and the set temperature)?
Because of the sinking nature of cold air, the different temperatures may exist in different locations in the refrigerator (the temperature of the bottom will be the lowest). The panel only shows the average temperature of the refrigerator.
8. What kind of cable do I need to use in the car and at home?
The DC cable is provided. You can power it from your vehicle’s cigarette lighter plug using the DC cable. You can also power it at home, but you need to use with AC cable as precondition.
9. What is the specification of the fuse of the refrigerator?
The supply line is protected by a 15A fuse located in the refrigerator.

App Control

|
---|---
https://play.google.com/store/apps/details?id=com.scinan.indelb.general| https://play.google.com/store/apps/details?id=com.scinan.indelb.general

APP Download and Installation:
Users of Android mobile phone can download in
Android market, and iPhone users can download
from IOS App Store.
Register/Log Into APP

Register with your phone number Become a member of us Log into the APP after registration

Instruction:
Log into the APP, with Bluetooth on, and click “Add Devices”. The APP will search for available fridge, and enter the instruction display when it connects with your fridge.
[State]
Click “ ” to control turning on/off of the fridge.
When it is on, its working state can be checked, including the temp, voltage, electric quantity, mode, temp graph.
[Setting]

• Temperature control: the temp can be adjusted from -18°C to 10°C(0°F to 50°F). Click or slide to control.
• Celsius and Fahrenheit switch: Celsius and Fahrenheit can be switched. Click or slide to switch.
• Battery protection mode: three modes—high, medium, low. Click or slide to change. Do not change it optionally. The mode should be set according to your vehicle battery, and medium is recommended.
• After finishing the setting, switch to “state” display to check the state information of the fridge.

Safety Instruction

SAFETY INSTRUCTIONS
Please read the user manual and safety instructions carefully before using the appliance.
By ignoring the safety instructions, the manufacturer cannot be held responsible for the damage.
The use of accessories that are not recommended by manufacturer can cause injuries and will invalidate any warranty that you may have.
The appliance shall not be exposed to moderate/heavy rain.
Place the refrigerator on a dry, secure surface, with adaquate ventilation.

Do not leave the refrigerator unattended in uncovered, outdoor areas exposed to the elements.
Do not use this appliance near direct heatsources, such as an open flame or radiator.
Do not place open containers of liquid inside the fridge.
Please don’t put hot/warm food into the fridge directly without letting it cooling off. Place/arrange the content of your fridge securely when using the refrigerator inside a moving vehicle.
To maximize energy savings, please make sure the lid is closed and secure, and only open the fridge when you need to.
The power cable must only be replaced by qualified technical personnel and by an assistant body authorized by the manufacturer.
Before carrying out any maintenance operations on the refrigerator, disconnect all power sources from the fridge.
This appliance is suitable for camping use.
WARNING!

Please keep the fridge in a well ventilated area.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
Do not use electrical devices inside the food storage compartments of the appliance, unless approved/recommended by the manufacturer.
Do not store explosive items, such as aerosol cans with a flammable propellant in this appliance.
Risk of fire and electrical shock.
Do not let hot items touch the plastic parts of the appliance.
Do not put flammable products or items in, near or on the appliance.
Do not touch the compressor or the condenser when the fridge is operating. They may be very hot.
When setting up the appliance, ensure the supply cord is not trapped or damaged.

Further information is provided on the technical data label inside the product.

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. This appliance is intended to be used in household and similar applications such as  staff kitchen areas in shops, offices and other working environments;  farm houses and by clients in hotels, motels and other residential type environments;  bed and breakfast type environments; catering and similar non-retail applications.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
5. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
6. DANGER: Risk of child entrapment. Before you throw away your old refrigerator or freezer:

• Take off the doors.
• Leave the shelves in place so that childrenmay not easily climb inside.

Cooler Than A Cooler

Documents / Resources

| ICECO GO20 Dual Zone Portable Refrigerator [pdf] User Manual
GO20 Series, GO20 Dual Zone Portable Refrigerator, GO20, Dual Zone Portable Refrigerator, Portable Refrigerator, Refrigerator
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>