IMMERGAS R410A Circuit Connection Kit Instruction Manual
- June 9, 2024
- IMMERGAS
Table of Contents
R410A Circuit Connection Kit
Product Information:
- Product Name: R410A Circuit Connection Kit
- Product Code: 3.026089
- Manufacturer: Not specified
Product Usage Instructions:
- Make sure the product is stored in a dry environment and protected against weathering.
- Read the instruction manual carefully before starting the installation process.
- Ensure that the installation is performed by authorized professionally qualified staff with specific technical skills in the plant sector, as required by law.
- Use the distances reported in the appliance installation template to connect the refrigerant line to the wall.
- Use the kit to connect the refrigerant circuit of the hydronic module to the prearranged line inside the wall.
- Pay attention not to damage the insulation during the installation process to prevent condensate formation.
- Refer to the Audax Pro condensing unit instruction booklet before connecting the refrigerant line.
Product Composition:
- 1 Pipe for liquid state refrigerant SAE 3/8 (LP)
- 1 Pipe for gas state refrigerant SAE 5/8 (GP)
Note: All products are protected with suitable transport packaging.
General Warnings:
- Improper installation or assembly of the kit and devices can cause unexpected problems to people, animals, and objects.
- Follow the provisions specified in the regulations in force and principles of good practice regarding safety in the work site, environment protection, and injury prevention.
- Read the instructions provided with the product carefully to ensure a proper installation.
- Installation and maintenance must be performed in compliance with the regulations in force and according to the manufacturer’s instructions.
All products are protected with suitable transport packaging. The material must be stored in dry environments and protected against weathering. This instruction manual provides technical information for installing the kit. As for the other issues related to kit installation (e.g. safety in the work site, environment protection, injury prevention), it is necessary to comply with the provisions specified in the regulations in force and principles of good practice. Improper installation or assembly of the appliance and/or components, accessories, kit and devices can cause unexpected problems to people, animals and objects. Read the instructions provided with the product carefully to ensure a proper installation. Installation and maintenance must be performed in compliance with the regulations in force, according to the manufacturer’s instructions and by authorised professionally qualified staff, intending staff with specific technical skills in the plant sector, as envisioned by the Law
DESCRIPTION
Using the kit it is possible to connect the refrigerant circuit of the hydronic module to the prearranged line inside the wall. Pipes are insulated in order to prevent condensate formation please pay attention not to damage the insulation during the installation.
INSTALLATION
In order to connect the refrigerant line, please respect the indications reported in the Audax Pro condensing unit instruction booklet. Make the connection to the wall using the distances reported in the appliance installation template
Kit composition
- 1 Pipe for liquid state refrigerant SAE 3/8″ (LP)
- 1 Pipe for gas state refrigerant SAE 5/8″ (GP)
