Danfoss APP 16 180B3254 Axial Piston High Pressure Pump User Guide

Danfoss APP 16 180B3254 Axial Piston High Pressure Pump

General information

• In connection with a claim or a repair issue of the Danfoss APP 11 – 22 pumps, it is important that we have appropriate information and photos.
• This guide provides information about the ‘Claim/Repair Information Document’ and the required information. Similarly, this guide also provides the specific part group photos needed for review by your Danfoss service technician*.
• *Note: we request ALL photos be provided, not just photos of parts that appear damaged. Information form shown on the right:
• Pump – product information:
  • Pump type
  • Danfoss code no.
  • Serial number
• Pump – operation conditions:
  • Inlet pressure
  • Outlet pressure
  • Rpm
  • Hours of operation
  •  Filtration inmicron if Nominel or Absolute
  • Flow
  • Water temperature
  • TDS
• Pump – additional if possible:
  • Permeate flush before shut down (yes or no)
  • Number of starts per day (average)
  •  If VFD is used – Ramp up and down time
• Reason for pump failure / break down:

Idenfication

Coupling

Shaft seal

Piston shoe

Swash plate

Retainer ball and plate

Port plate

Valve plate

Housing

Cylinder barrel

DanfossA/5
High Pressure Pumps• danfoss.com • +45 7488 2222 • highpressurepumps@danfoss.com

• Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, on line or via download, shall be considered informative, and is only binding if and to the
  extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material.

• Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product.

• All trademarks in this material are property of Danfoss A/Sor Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/5. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>