Crown CEAS1 Amplifier Accessory Installation Guide

Crown CEAS1 Amplifier Accessory Installation Guide

Overview

CE Series Amplifier with Optional Output Connector Installed

TOOLS REQUIRED

Torx #T-15 screwdriver

INCLUDES
2 – #8 x 1¼ in. screws
CE optional output connector

WARNING: CEAS1 AND CEAS2 OPTIONAL OUTPUT CONNECTORS MUST BE INSTALLED BY A QUALIFIED SERVICE CENTER.

Follow the installation instructions provided on the next page to install your CE Optional Output Connector. Once installed, your CE amplifier will offer barrier block or 5-way binding post output connectors (depending on the kit ordered).

Note that installing the optional output connectors does NOT defeat the Neutrik® Speakon connectors on the back panel of the amplifier. If, at any time, you prefer to use the standard Neutrik® Speakon® output connectors, it is not necessary to remove the optional output connector panel from the amplifier. Instead, simply connect your speaker wires to the Speakon® output connectors instead of the optional output connectors.

PART # CEAS1

CE Series Amplifier Barrier Strip Output Connectors

PART # CEAS2

E Series Amplifier 5-Way Binding Post Output Connectors

CE Series Optional Output Connector Wire Locations

Rear of Amplifier

INSTRUCTIONS

1. Turn down level controls.

2. Turn off amp.

3. Unplug power cord.

4. Remove the four T-15 torx-head screws from the top cover, and retain screws. Remove top cover.

5. Remove the two T-15 torx-head screws from the rectangular cover plate on the back panel, and retain screws. Remove cover plate and discard.

6. Install CEAS1/CEAS2 in back panel opening and affix with cover-plate screws.

7. Attach wires to main PWA as follows (refer to the illustration above):
   Red wire to relay K100 “ON” terminal (location A).
   Orange wire to relay K200 “ON” terminal (location B).
   Black wire to WP7 lug (location C).

8. Reinstall top cover.

9. Connect wires to new output panel.

10. Plug in power cord.

11. Turn on amp.

12. Turn up the level controls to desired volume.

P.O. Box 1000 Elkhart, IN 46515 Phone: 219-294-8000 Fax: 219-294-8250
Web Page: http://www.crownaudio.com

References

• Crown Audio - Professional Power Amplifiers | English

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>