HOLLYLAND Solidcom C1 Pro Microphone User Manual

HOLLYLAND Solidcom C1 Pro Microphone User Manual

Introduction

Thank you for purchasing Hollyland Solidcom CI Pro full-duplex wireless noise cancelling intercom system.

The Solidcom C1 Pro. adopting the advanced DECT technology. is Hollyland’s first wireless self-contained intercom system with Environmental Noise Cancellation (ENO. The system operates in the 1.9GHz band, providing a reliable LOS range of up to 1,100ft (350m).

This User Manual will help you through the installation and use of the equipment.

Packing List

Solidcom Cl Pro – 25 2-person Noise Cancelling Headset Intercom

1. Master Headset (With Red Nameplate): xl
2. Remote Headset (With Blue Nameplate): xl
3. Charging Case: x1
4. Battery: x4
5. Microphone Cushion: x2
6. Over-ear Leather Cushion: x2
7. On-ear Foam Cushion: x2
8. USB-A to USB-C Cable: x1
9. Storage Case: xl
10. User Manual: xl
11. Warranty Card: xl

Note: The quantity of the items depends on the product configuration.

Packing List

Solidcom Cl Pro – 3S 3-person Noise Cancelling Headset Intercom

1. Master Headset (With Red Nameplate): xl
2. Remote Headset (With Blue Nameplate): x2
3. Charging Case: x1
4. Battery: x6
5. Microphone Cushion: x3
6. Over-ear Leather Cushion: x3
7. On-ear Foam Cushion: x3
8. USB-A to USB-C Cable: xi
9. Storage Case: x1
10. User Manual: xl
11. Warranty Card: xl

Note: The quantity of the items depends on the product configuration.

Packing List

Solidcom Cl Pro – 4S 4-person Noise Cancelling Headset Intercom

1.   Master Headset (With Red Nameplate): xl
2. Remote Headset (With Blue Nameplate): x3
3. Charging Case: xl
4. DC Adapter: xl
5. Battery: x8
6. Microphone Cushion: x4
7. Over-ear Leather Cushion: x4
8. On-ear Foam Cushion: x4
9. USB-A to USB-C Cable: xl
10. Storage Case: xl
11. User Manual: xl
12. Warranty Card:   xl

Note: The quantity of the items depends on the product configuration.

Packing List

Solidcom Cl Pro – 6S 6-person Noise Cancelling Headset Intercom

1. Master Headset (With Red Nameplate): x1
2. Remote Headset (With Blue Nameplate): x5
3. Charging Case: x1
4. DC Adapter: x1
5. Battery: x12
6. Microphone Cushion: x6
7. Over-ear Leather Cushion: x6
8. On-ear Foam Cushion: x6
9. USB-A to USB-C Cable: xl
10. Storage Case: xl
11. User Manual: xl
12. Warranty Card: xl

Note: The quantity of the items depends on the product configuration.

Packing List

Solidcom Cl Pro – 8S 8-person Noise Cancelling Headset Intercom

1. Master Headset (With Red Nameplate):   xl
2. Remote Headset (With Blue Nameplate): x1
3. Charging Case: xl
4. DC Adapter: x1
5. Battery:   x16
6. Microphone Cushion: x8
7. Over-ear Leather Cushion: x8
8. On-ear Foam Cushion: x8
9. USB-A to USB-C Cable: xl
10. Storage Case: xl
11. User Manual: x1
12. Warranty Card: xl

Note: The quantity of the items depends on the product configuration.

Operation Guide

1. Install the battery

Step 1: Slide the battery compartment cover lock

Step 2: Open the cover.

Step 3. Place the battery into the compartment and close the cover.

2. Turn on the master headset and remote headsets.
   

3. Ensure that all the headsets are turned ON.

4. The indicator light stops flashing and stays ON when the master headset is successfully connected with the remote headsets.

5. Red nameplate: Master headset Blue nameplate: Remote headset

6. Turn on the microphone.
   
   Rotate the microphone boom upward clockwise.

Microphone Boom Rotation

Rotate the microphone boom upward counterclockwise.

4. The Solidcom C1 Pro system is now ready for use.

Pairing

The master headset is paired with the remote headsets at the factory. They are ready for use right out of box. Manual pairing is only required when a new headset is added to the system. During the pairing process. all the headsets must be turned ON and connec ed.

Pairing steps:

1. Press and hold the A button on both the master headset and remote headsets for 5 seconds. Pairing is completed when the indicator light on each microphone boom stops flashing and stays ON.
2. One master headset can be paired with up to 7 remote headsets.

Solidcom Cl Pro is highly versatile and can be applied in a variety of usage scenarios. For more information about how to operate this system. please visit https://hollyland- techhelp.zendesk.com/us/categories/360005064994-Dowland

Parameters

headset: >5 hours (when ENC is turned ON and the master headset is connected with 5 remote headsets)Master headset: >4 hours (when ENC is turned ON and the master headset is connected with 7 remote headsets)
Charging Time| About 2.5 hours
Frequency Response| ENC OFF: 150Hz- 7kHz (fluctuation range: t6dB) ENC ON: 150Hz-7kHz (fluctuation range: ±10dB)
Signal-to-Noise Ratio| 71±2dB©94dBSPL,1 kHz
Distortion| <1°4@94dBSPL, 150Hz-7kHz
Microphone Type| Electret
Input SPL| >115dBSPL
Output SPL| 94t3c113SPL (@94dBSPL. 1kHz)
ENC| 20dB -±2 with two microphones(relative to environmental noise in all directions)
Net Weight| About 170g (6oz) with batteries included
Temperature Range| Ot to 45°C (working condition) -10°C to 60°C (storage condition)

Note: The frequency band and TX power vary by countary and region.

Safety Precautions

Do not place the product near or inside heating devices (including but not limited to microwave ovens, induction cookers, electric ovens, electric heaters, pressure cookers, water heaters, and gas stoves) to prevent the battery from overheating and exploding.

Do not use non original charging cases, cables. and batteries with the product. The use of non-original spare parts may cause electric shock, fire. explosion. or other dangers.

Support

If you encounter any problems in using the product or need any help, please contact Hollyland Support via the following ways:

Hollyland User Group
 Holylandtech
 tolilendtech
 tolylandtech
[email protected]
www.hollyland-tech.com

Statement
All copyrights belong to Shenzhen Hollyland Technology Co, Ltd

Trademark Statement
Without the written approval of Shenzhen Hollyland Technology Co, Ltd., no organization or individual may copy or reproduce part or all of any written or illustrative content and disseminate it in any form,

Note:
Due to product version upgrades or other reasons, this User Manual will be updated from time to time.Unless otherwise agreed, this document is provided as a guide for use only. All representations, information, and recommendations in this document do not constitute warranties of any kind, express, or implied

FCC Requirement

‘Any changes or mosiiations not expressly aporoved bythe party response for compliance could void the ues author to operate the devise Ths device complies wth Part 5 of the FOC Rules
‘Operations are subject to the fling wo contions:

1. Tis device may ot cause hou ietrerence
2. This device must acept ay interference eceed inducing interference that may cause undested operations.

Fc Radiation Exposure Statement
The levies hasbeen teste ond complies with FCC SAR its

Note:
“This dvew hasbeen teste and found to comply wth the its fora Class B gta device, pursuant to Par 15 ofthe FCC Rules. These mts are designed to provide reasonable protection agaist haul steference ino esidentalinstalation. This device generates uses, and can oda ai equency energy; and fit not stale and used in acordance with the instructions may cause har iterference torch communications, However theres no guarantee that intefrence wilnot occur sos paula intaltion, ths device does cause harnfl interference to ado or teeison ception, ‘hich canbe determined by turing the devi of and on, the users encouraged tote to eovret the interference by one or mere ofthe ftowing measures:

• Reorent or locate the ecehng antenna
• Increase the stance between the device and the reer
• Connect the device to an owt on acct ileent fam that to which the ceiver is connected,
• Cone the desler or an experienced rado/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>