dB TECHNOLOGIES DGS-FIFTYSUB Stabilizer Kit for Fifty Sub Instructions
- June 9, 2024
- dB Technologies
Table of Contents
DGS-FIFTYSUB STABILIZER KIT
INSTRUCTIONS
DGS-FIFTYSUB Stabilizer Kit for Fifty Sub
DESCRIPTION: Stabilizer kit for FIFTY SUB stack mounting
PACKAGE CONTENT
A. (4x) Stabilizer floor bracket
B. (4x) Three lobes knob
C. (2x) V bracket
CAUTION: Only qualified personnel may use the DGS-FIFTYSUB stabilizer
kit. To prevent hazards to people, animals and/or objects, make sure that the
installation is stable and secure. Follow the safety regulations and laws of
the country in which you use the product. Install the product as described in
these instructions. To use this accessory safely, check that it is working and
intact before use.
CHECK (IF ANY) THE LATEST VERSION OF THIS DOCUMENT ON
WWW.DBTECHNOLOGIES.COM
INSTALLATION
- Align the holes of the stabilizer floor brackets to the holes on the side of the subwoofer as shown and fasten screwing the B lobe-knob.
- In case of stack mounting of two subwoofers, use the V bracket to provide more stability to the cluster.
- Align the holes of the V bracket to the one of the upper subwoofers and fasten screwing the B lobe-knobs.
Features, specification and appearance of products are subject to change without notice. dB Technologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation change or improve products previously manufactured.
420120409Q REV.1.0
DGS-FIFTYSUB
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA
BOLOGNA (ITALIA)
Tel +39 051 969870
Fax +39 051 969725
www.dbtechnologies.com
[email protected]