db Technologies DRK-218F Subwoofer Flybar Kit Instructions
- June 10, 2024
- dB Technologies
Table of Contents
db Technologies DRK-218F Subwoofer Flybar Kit
Product Information
Name: Flybar DRK-218F
Description: Flybar for mounting VIO S218F subwoofers
Package Content
- Flybar
- (2x) Snap pin
Product Usage Instructions
- Lift the side joints of the subwoofer brackets and place the flybar above them as shown.
- Insert the two included snap pins in the related fixing holes as shown to fasten the flybar to the subwoofer.
- Please use appropriate hanging points depending on the amount of the subwoofers to hang.
To use the Flybar DRK-218F, follow these instructions:
- Lift the side joints of the subwoofer brackets and place the flybar above them as shown.
- Insert the two included snap pins in the related fixing holes as shown to fasten the flybar to the subwoofer.
- Please use appropriate hanging points depending on the amount of the subwoofers to hang. If you are hanging up to 10 subwoofers, use a single hanging point. If you are hanging up to 14 subwoofers, use two hanging points.
Note: Features, specification, and appearance of products are subject to change without notice. dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation change or improve products previously manufactured.
Product Instruction
DESCRIPTION: Flybar for VIO S218F subwoofers flown mounting
PACKAGE CONTENT
- A. Flybar
- B. (2x) nap pin
CAUTION: DRK-218F flybar must be used only with dBTechnologies VIO S218F subwoofer and only qualified personnel may it. To prevent hazards to people, animals and/or objects, make sure that the installation is stable and secure. Follow the safety regulations and laws of the country in which you use the product. Install the product as described in these instructions. To use this accessory safely, check that it is working and intact before use.
VERIFICARE (SE PRESENTE) L’ULTIMA REVISIONE DI QUESTO DOCUMENTO SUL SITO WWW.DBTECHNOLOGIES.COM CHECK (IF ANY) THE LATEST VERSION OF THIS DOCUMENT ON WWW.DBTECHNOLOGIES.COM
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA) Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies- aeb.com
INSTALLATION
-
Lift the side joints of the subwoofer brackets and place the flybar above them as shown.
-
Insert the two included snap pins in the related fixing holes as shown to fasten the flybar to the subwoofer.
-
Please use appropriate hanging points depending on the amount of the subwoofers to hang.
CAUTION: According to EUROCODE 3 (EN 1993-1-1), max 14 (with double hang point) or 10 (with single hang point) VIO S218F subwoofers can be hung to DRK- 218F. According to BGV-C1, the maximum load is half than EUROCODE 3 (EN 1993-1-1).
Features, specification and appearance of products are subject to change without notice. dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation change or improve products previously manufactured.