CORTEX V1 Adjustable Dumbbell Stand User Manual
- June 9, 2024
- CORTEX
Table of Contents
CORTEX V1 Adjustable Dumbbell Stand
Product may vary slightly from the item pictured due to model upgrades.
Read all instructions carefully before using this product.
Retain this owner’s manual for future reference.
NOTE:
This manual should not be used to guide your purchasing decision. Your
product, and the contents inside its carton, may vary from what is listed in
this manual. This manual may also be subject to updates or changes. Updated
manuals are available through our website at
www.lifespanfitness.com.au
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Read all instructions before using this machine.
Please keep this manual with you at all times.
- It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. PLEASE NOTE: It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.
- Before starting any exercise program you should consult your doctor to determine if you have any medical or physical conditions that could put your health and safety at risk, or prevent you from using the equipment properly. Your doctor’s advice is essential if you are taking medication that affects your heart rate, blood pressure or cholesterol level.
- Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, and extreme shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do experience any of these symptoms, you should consult your doctor before continuing with your exercise program.
- Keep children and pets away from the equipment. This equipment is designed for adult use only.
- Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 meters of free space around it.
- Before using the equipment, check that the nuts and bolts are securely tightened. If you hear any unusual noises coming from the equipment during use and assembly, stop immediately. Do not use the equipment until the problem has been rectified.
- Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught in the equipment or that may restrict or prevent movement.
- This equipment is designed for indoor and family use only.
- Care must be taken when lifting or moving the equipment so as not to injure your back.
- Always keep this instruction manual and assembly tools at hand for reference.
- The equipment is not suitable for therapeutic use.
EXPLODED DIAGRAM
PARTS LIST
Part No. | Description | Qty |
---|---|---|
1 | Tube, Bottom Cross Brace | 1 |
2 | Assembly, Rear Left Stabiliser | 1 |
3 | Assembly, Rear Right Stabiliser | 1 |
4 | Assembly, Stand Leg | 2 |
5 | Weldment, Left Dumbbell Platform | 1 |
6 | Weldment, Right Dumbbell Platform | 1 |
7 | Weldment, Towel Bar | 1 |
8 | Foot Pegs, Set of Four | 1 |
9 | Hold Down Straps, 2F 2M | 1 |
10 | Nut-NL 0.375-16 G2-Blk Z | 20 |
11 | Washer-Flat 0.375 Regular BLK Z | 36 |
12 | Screw-BHCS 0.375-16×3.0 G2-BlkO | 8 |
13 | Screw-BHCS 0.375-16×2.75 G2-BlkO | 4 |
14 | Screw-BHCS 0.375-16×2.5 G2-BlkO | 4 |
15 | Screw-FHCS 0.375-16×1.0 G2-BlkO | 4 |
16 | Plate, Center with Logo | 1 |
Hardware
7/32″ Allen Wrench (included)
Tools Required
7/32″ Allen Wrench (included)
You will also need:
9/16: Socket
9/16″ Wrench or Adjustable Wrench
Utility Knife or scissors to cut nylon ties
Hardware Card A | Qty |
---|---|
2.75″ Screw, Button Head | 4 |
2.5″ Screw, Button Head | 4 |
1.0″ Screw, Flat Head | 4 |
Nut, Lock | 12 |
Washer, Flat | 20 |
Hardware Card B | Qty |
--- | --- |
3.0″ Screw, Button Head | 8 |
Nut, Lock | 8 |
Washer, Flat | 4 |
7/32″ Allen Wrench | 1 |
ASSEMBLY INSTRUCTIONS
STEP 1
- Attach the Rear Left Stabiliser (#2) to the Stand Leg (#4) using bolts (#12, #11, #10).
NOTE: Do not tighten bolts.
STEP 2
- Attach the Rear Right Stabiliser (#3) to the Stand Leg (#4) using bolts (#12, #11, #10).
NOTE: Do not tighten bolts.
STEP 3
- Attach the Bottom Cross Brace (#1) to the Rear Left Stabiliser (#2) and Rear Right Stabiliser (#3) using the bolts shown. Make sure that the narrower edge of the Cross Brace (#1) is closer to the Stand Leg (#4) uprights.
NOTE: Do not tighten bolts.
STEP 4
-
Install the Centre Plate (#17) to both Stand Legs (#4) using the bolts shown.
NOTE: Make sure that the Centre Plate edges are on the outer sides of the legs, and that the logo of the plate is right side up. -
Tighten all bolts from Steps 1, 2 and 3 securely.
STEP 5
- Secure the Left Dumbbell Platform (#5) to Left Stand Leg (#4) using the bolts shown.
NOTE: Make sure the screw holes in the Platform are toward the centre of the stand.
STEP 6
- Secure the Right Dumbbell Platform (#6) to Right Stand Leg (#4) using the bolts shown.
NOTE: Make sure the screw holes in the Platform are toward the centre of the stand.
STEP 7
- Attach the Towel bar (#7) to the Left Dumbbell Platform (#5) and the Right Dumbbell Platform (#6) using hardware shown. Hand tighten screws in a cross pattern, to ensure even fit.
NOTE: Tighten all screws securely.
STEP 8
- Attach either Foot Pegs (#8) or Caster Wheels (#15) to the Rear Left Stabiliser (#3), and both Stand Legs (#4).
- Attach the Hold Down Straps (#9) to the Left Dumbbell Platfrom (#5) and the Right Dumbbell Platform (#6) as shown.
EXERCISE GUIDE
PLEASE NOTE:
Before beginning any exercise program, consult your physician. This is
important especially if you are over the age of 45 or individuals with pre-
existing health problems.
The pulse sensors are not medical devices. Various factors, including the
user’s movement, may affect the accuracy of heart rate readings. The pulse
sensors are intended only as an exercise aid in determining heart rate trends
in general.
Exercising is great way to control your weight, improving your fitness and
reduce the effect of aging and stress. The key to success is to make exercise
a regular and enjoyable part of your everyday life.
The condition of your heart and lungs and how efficient they are in delivering
oxygen via your blood to your muscles is an important factor to your fitness.
Your muscles use this oxygen to provide enough energy for daily activity. This
is called aerobic activity. When you are fit, your heart will not have to work
so hard. It will pump a lot fewer times per minute, reducing the wear and tear
of your heart. So as you can see, the fitter you are, the healthier and
greater you will feel.
WARM UP
Start each workout with 5 to 10 minutes of stretching and some light
exercises. A proper warm-up increases your body temperature, heart rate and
circulation in preparation for exercise. Ease into your exercise.
After warming up, increase the intensity to your desired exercise program. Be
sure to maintain your intensity for maximum performance. Breathe regularly and
deeply as you exercise.
COOL DOWN
Finish each workout with a light jog or walk for at least 1 minute. Then
complete 5 to 10 minutes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent post-exercise problems.
WORKOUT GUIDELINES
This is how your pulse should behave during general fitness exercise. Remember
to warm up and cool down for a few minutes.
The most important factor here is the amount of effort you put in. The harder
and longer you work, the more calories you will burn.
WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer.
In addition, they come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage.
You are entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Full details of your consumer rights may be found at
www.consumerlaw.gov.au.
Please visit our website to view our full warranty terms and conditions:
http://www.lifespanfitness.com.au/warranty-repairs
WARRANTY AND SUPPORT
Any claim against this warranty must be made through your original place of
purchase.
Proof of purchase is required before a warranty claim may be processed.
If you have purchased this product from the Official Lifespan Fitness website,
please visit https://lifespanfitness.com.au/warranty-form
For support outside of warranty, if you wish to purchase replacement parts or
request a repair or service, please visit https://lifespanfitness.com.au
/warranty-form and fill in our Repair/Service Request Form or Parts Purchase
Form.
Scan this QR code with your device to go to lifespanfitness.com.au/warranty-
form
References
- Product Support Forms – Lifespan Fitness
- Home | Consumer Law
- Lifespan Fitness | Treadmills, Cardio and Strength Equipment
- Warranty & Repairs - Gym Equipment – Lifespan Fitness
- Product Support Forms – Lifespan Fitness
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>