Sangcon KYMQ-4 Gravity Electric Salt and Pepper Grinder Set Shakers User Manual
- June 17, 2024
- Sangcon
Table of Contents
User Manual
KYMQ-4 Gravity Electric Salt and Pepper Grinder Set Shakers
Rechargeable Electric Gravity Salt and Pepper Grinder
Before using for the first time
To ensure safety and maintain the high quality of the product, we recommend that you read and follow the instructions carefully.
- Do not immerse the grinder in water or any other liquid to avoid injury to others or damage to the product.
- Use for pepper and salt only please do not use for other purposes.
- Do not forcefully tighten, twist the grinder or attempt to speed up the mechanism.
- Do not dismantle the product yourself.
- Keep body parts and utensils away from the grinding head to avoid damage.Please hold the grinder firmly when in use.
- Keep this product away from children.
- Keep away from flammable, explosive, gases and high temperature environments.
How to charge
- Insert the charging cable interface into the type C charging socket at the back of the grinder.
- Plug the adapter (not included) into an indoor power outlet. The power indicator will light up in red, indicating normal charging. It takes approximately 2 hours for the battery to fully charge. Once the battery is fully charged, the indicator will turn white.
CAUTIONS
*This is a lithium-battery rechargeable product. When not in use, it is recommended to recharge the battery once every three months to ensure its longevity.
How to fill
- To refill the mill, rotate the motor base counterclockwise to remove the transparent cup.
- Fill the grinder with pepper grains or sea salt crystals, filling up to 80% of the cup. Please do not exceed the maximum capacity.
- Reassemble the motor base.
How to use
-
To start using the gravity mill, just push a button and tilt it! it’s that simple!
-
Adjust the knob located on the top of the grinder.
Rotate clockwise for fine grinding and counterclockwise for coarse grinding. -
After grinding, particles may get stuck, making it difficult to adjust the coarseness. Gently tap the product to dislodge the particles, then continue rotating to readjust the coarseness.
Trouble shooting
If the grinder does not work or stops while grinding:
- Please charge it.(Note: It is not recommended to use the product while charging).
- Please adiust the adjuster with counter-clockwise direction.
PRODUCT SPECIFICATION
Product Name: KDL-546-2B Electric Grinder Set
Model: KDL-546-L
Rated voltage/power: 9V / 3.6W
Operating noise: <72dB
Main material: stainless steel, Acrylic, ABS (acrylonitrile, butadiene,
styrene)
Product Size: 6363202mm
Place of origin: China
Note: Product specifications may vary slightly due to different
measurement methods, subject to the actual product.
PRODUCT DESCRIPTION
- Grinder Knob
- Mill Top Cover
- Motor Section
- Battery compartment (Batteries not included)
- Container
- Built-in LED Light
HOW TO INSTALL THE BATTERIES
- Unscrew the upper cap with anti-clockwise directionand remove it from the body.
- Unscrew the upper cap with anti-clockwise directionand remove it from the body
- Put the upper cap back to the body and turn it to fixwith clockwise direction.
HOW TO USE
- Unscrew the lower part of transparent container withclockwise direction and remove it from the body.
- Put pepper or salt into the container, attach and lock the upper body and container by rotating it in reverse.
- Use the adjuster to adjust the grind size according to your preference.
- Turn the mill upside down to start grinding.
- This product features an adjustment knob that can be rotated multiple times between the finest and coarsest settings.
- To Adjust to a Fine Grind: Rotate the adjuster from “COARSE to “FINE”. Continue rotating for a few circles until the desired fineness is achieved
- To Adjust to a Coarse Grind: Rotate the adjuster from “FINE” to “COARSE”. If the adjuster becomes loosen, it may be due to pepper grains stuck in the burr. Simply rotate the grinder for 1 second to loosen the burr and then continue adjusting. This is a normal occurrence with ceramic burrs and will not affect its normal use.
- If the adjuster falls off, please assemble the components in the orders shown below.
TROUBLESHOOTING
If the grinder does not work or stops while grinding:
- Please check that the batteries are alkaline batteries.
- Please check that the batteries are installed correctly.
- Please confirm that there is sufficient battery power.
- Please adjust the adjuster in a counter-clockwise direction.
If the above steps are all correct and the grinder still does not work properly, please contact the vendor for maintenance service.
NINGBO KAIDELI ELECTRIC CO., LTD.
Address: Binhai Industrial Zone, Xidian Town, Ninghai,
Zhejiang, 345613 China
Post-sale service: [email protected]