CHANNEL VISION B-300 Transmitter Receiver Instructions
- June 13, 2024
- Channel Vision
Table of Contents
CHANNEL VISION B-300 Transmitter Receiver
Product Information
The CHANNEL VISIONTM B-300 Balun for Video, Audio, and Power is designed to provide impedance transformation from 75 ohm coaxial cable to twisted pair cabling. It allows for the transmission of video, audio, and power over CAT5 cable, making it a convenient choice for security camera installations where only a CAT5 cable is available. The B-300 is compatible with Category 5, 5e, and 6 wiring and is suitable for both new construction and retrofit applications.
Features:
- Includes both transmit and receive units
- Sends video, audio, and power over 1,000 ft. of CAT5 cable
- Compatible with Category 5, 5e, and 6 wiring
- Easy installation
Specifications:
- Video In/Out: Composite video signal
- Video format: NTSC/PAL
- Video Attenuation: Specifications not provided in the manual
- Transmission distance: Up to 1,000 ft. over CAT5 cable
- Operation freq. range: Specifications not provided in the manual
- Twisted pair connector: RJ-45
- Common mode rejection: Specifications not provided in the manual
- Wire type: Category 5, 5e, and 6
- Operating Temperature: Specifications not provided in the manual
- Dimensions: Specifications not provided in the manual
Product Usage Instructions
To install the CHANNEL VISIONTM B-300 Balun, follow these steps:
- Connect the power and audio/video signals to the B-300.
- Connect a CAT5 cable with RJ-45 connectors to the B-300.
- Refer to the RJ-45 Pin Assignments for proper wiring:
| TIA568A | Pins | Signal |
|---|---|---|
| T3 | Green/white | R3 |
| T2 | Orange/white | R1 |
| T1 | Blue/white | R2 |
| T4 | Brown/white | R4 |
View into jack
Pins| Signal
1| Video Signal
2| Video Ground
3| Audio Signal
4| Power
5| Power +
6| Audio Ground
7| Power +
8| Power –
If you encounter any issues with the product during or after the warranty period, please contact Channel Vision Technology, your dealer, or any factory- authorized service center for assistance.
Note: Channel Vision products are not intended for use in medical, lifesaving, life-sustaining, or critical environment applications. Using or selling Channel Vision products for such applications is done at your own risk, and Channel Vision cannot be held responsible for any damages resulting from improper use or sale.
Model B-300
The B-300 Balun for Video Audio and Power provides the necessary impedance transformation to transition from 75-ohm coax to twisted pair cabling. It is a great way to deliver video, audio, and power from a security camera when you only have a CAT5 cable running to the camera location and no coax. The low cost, simplicity, and availability of twisted pair cable make the B-300 a convenient choice for both new construction and retrofit applications.
Features
- Includes both transmit and receive units
- Sends video, audio, and power over 1,000 ft. of CAT5
- Compatible with Category 5, 5e, and 6 wiring
- Easy installation
Installation Diagram
Installation
- Connect power and audio/video signals to the B-300.
- Connect a CAT5 cable with RJ-45 connectors to the B-300.
RJ-45 Pin Assignments For reference
Pins/Signal
- Video Signal
- Video Ground
- Audio Signal
- Power –
- Power +
- Audio Ground
- Power +
- Power –
Warranty
10-Year Limited Warranty
Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for ten years from the date of original purchase. This is a no hassle warranty with no mail-in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of the original purchase date will be required before warranty repairs are provided.
Mail-in service can be obtained during the warranty period by calling (800) 840- 0288 toll-free. A Return Authorization number must be obtained in advance and can be marked on the outside of the shipping carton This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision Technology, your dealer or any factory-authorized service center
Channel Vision products are not intended for use in medical, lifesaving, life- sustaining or critical environment applications. Channel Vision customers using or selling Channel Vision products for use in such applications do so at their own risk and agree to fully indemnify Channel Vision for any damages resulting from such improner use or sale.
Specifications
- Video In/Out: BNC male connector
- Video format: RS170, NTSC, CCIR or SECAM
- Video Attenuation: 0.5dB (typical)
- Transmission distance: Max. 1000 ft.
- Operation free. range: 0 to 10MHz
- Twisted pair connector: RJ-45 Connector
- Common mode rejection: 50dB
- Wire type: UTP Category 5, 5e or 6
- Operating Temperature: -10°C to 70°C
- Dimensions: 0.86″ × 0.8″ x 1.7″ (excluding connectors) 22mm x 21mm x 4.3mm
234 Fischer Avenue, Costa Mesa, California 92626 USA
- www.channelvision.com.
- (714)424-6500
- (800)840-0288
- (714)424-6510 fax
- email: [email protected].