CORTEX EXER-11 Folding Exercise Bike User Manual
- June 6, 2024
- CORTEX
Table of Contents
FT-10 Cable
Crossover Station
USER MANUAL
Product may vary slightly from the item pictured due to model upgrades.
Read all instructions carefully before using this product. Retain this
owner’s manual for future reference.
NOTE: This manual should not be used to guide your purchasing decision.
Your product, and the contents inside its carton, may vary from what is listed
in this manual. This manual may also be subject to updates or changes. Updated
manuals are available through our website at
www.lifespanfitness.com.au
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Read all instructions before using this machine.
Please keep this manual with you at all times.
- Install the product on a flat level surface.
- Place your unit on a solid, level surface when in use.
- Never allow children on or near the machine.
- Keep hands away from all moving parts.
- Never drop or insert any object into any openings.
- Care must be taken when lifting or moving the equipment so as not to injure your back. Always use proper lifting techniques and/or seek assistance if necessary.
- Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine.
- Only 1 person at a time should use the machine.
- If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
- Do not use the machine near water or outdoors.
- Keep hands away from all moving parts.
- Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required when using the machine.
- Use the machine only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer.
- Do not place any sharp objects around the machine.
- Disabled person should not use the machine without a qualified person or physician in attendance.
- Never operate the machine if the machine is not functioning properly.
- A spotter is recommended during exercise.
PARTS LIST
ASSEMBLY INSTRUCTIONS
- Attach the connection frame (2) to right bottom framework and right bottom connection frame (4) and left bottom connection frame (5), using screw rod (28), screw M10X85 (37), flat washer Ф10 (35) and lock nut M10 (36).
- Attach the connection frame (2) to the foot rack (3), using screw M10X75 (48), flat washer Ф10 (35) and lock nut M10 (36).
- Attach rear bottom frame (1) to the pipe run (27) and the connection frame (2), using the reinforcing plate (32), screw M10X85 (37), flat washer Ф10 (35) and lock nut M10 (36).
- Attach the pipe run (27) to top connection frame (6), support frame (9) and the sliding plane (16), using rubber (33), screw M10X75 (48), flat washer Ф10 (35) and lock nut M10 (36).
- Attach long connection frame (13) to top connection frame (6) and the connection frame (2), using screw M10X85 (37), flat washer Ф10 (35) and lock nut M10 (36). The same as long connection frame (19).
- Attach top connection frame (6) to the right beam frame (7) and the left beam frame (8), using screw rod (28), screw M10X85 (37), flat washer Ф10 (35) andlock nut M10 (36).
- Attach the tube (29) to the right beam frame (7) and right bottom connection frame (4), using the right to adjust (11), the pulley Ф89 (34), screw M10X65 (39), flat washer Ф10 (35), lock nut M10 (36). The same as the left beam frame (8) and left bottom connection frame (5).
- Attach cross connection frame (10) to the right beam frame (7) and top connection frame (6), using the reinforcing plate (31), screw M10X85 (37), screw M10X80 (38), flat washer Ф10 (35) and lock nut M10 (36).
- Attach the right hand (15) to cross connection frame (10), using screw M10X85 (37), flat washer Ф10 (35) and lock nut M10 (36). The same as the left hand (14) and cross connection frame (10).
- Attach the cover plate (30) to the long connection frame (13) and long connection frame (19), using screw M6X10 (45), flat washer Ф6 (43) and spring washer Ф6 (44).
- Attach double pulley bracket (21) to the right to adjust (11), using screw M12X100 (42), flat washer Ф12 (40) and lock nut M12 (41). The same as the left to adjust (12) and double pulley bracket (21).
- Follow above drawing to assembly cable.
- Follow above drawing to assembly cable.
- Adjust the cable according to the structure shown.
EXERCISE GUIDE
PLEASE NOTE:
Before beginning any exercise program, consult your physician. This is
important for indivdiualds over the age of 45 or with pre-existing health
problems.
The pulse sensors are not medical devices. Various factors, including the
user’s movement, may affect the accuracy of heart rate readings. The pulse
sensors are intended only as an exercise aid in determining heart rate trends
in general.
Exercising is great way to control your weight, improve your fitness and reduce the effect of aging and stress. The key to a healthy lifestyle is to make exercise a regular and enjoyable part of your everyday life.
The condition of your heart and lungs and how efficient they are in delivering
oxygen via your blood to your muscles is an important factor to your fitness.
Your muscles use this oxygen to provide enough energy for daily activity. This
is called aerobic activity. When you are fit, your heart will not have to work
so hard. It will pump a lot fewer times per minute, reducing the strain on
your heart.
So as you can see, the fitter you are, the healthier and greater you will
feel.
WARM UP
Start each workout with 5 to 10 minutes of stretching and some light
exercises. A proper warm-up increases your body temperature, heart rate and
circulation in preparation for exercise.
Ease into your exercise. After warming up, increase the intensity to your
desired exercise program. Be sure to maintain your intensity for maximum
performance. Breathe regularly and deeply as you exercise.
COOL DOWN
Finish each workout with a light jog or walk for at least 1 minute. Then
complete 5 to 10 minutes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent postexercise problems.
WORKOUT GUIDELINES
**** This is how your pulse should behave during general fitness exercise.
Remember to warm up and cool down for a few minutes.
The most important factor here is the amount of effort you put in. The harder
and longer you work, the more calories you will burn.
WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer.
In addition, they come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage.
You are entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Full details of your consumer rights may be found at
www.consumerlaw.gov.au.
Please visit our website to view our full warranty terms and conditions:
http://www.lifespanfitness.com.au/warranty-repairs
WARRANTY AND SUPPORT
Any claim against this warranty must be made through your original place of
purchase. Proof of purchase is required before a warranty claim may be
processed.
If you have purchased this product from the Official Lifespan Fitness website,
please visit https://lifespanfitness.com.au/warranty-form
For support outside of warranty, if you wish to purchase replacement parts or
request a repair or service, please visit https://lifespanfitness.com.au
/warranty-form and fill in our Repair/Service Request Form or Parts Purchase
Form.
Scan this QR code with your device to go to
lifespanfitness.com.au/warranty-form
References
- Product Support Forms – Lifespan Fitness
- Home | Consumer Law
- Lifespan Fitness | Treadmills, Cardio and Strength Equipment
- Warranty & Repairs - Gym Equipment – Lifespan Fitness
- Product Support Forms – Lifespan Fitness
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>