CORTEX GSL1 Leverage Multi Station User Manual
- June 5, 2024
- CORTEX
Table of Contents
GSL1 Leverage Multi Station
User Manual
Product may vary slightly from the item pictured due to model upgrades.
Read all instructions carefully before using this product.
Retain this owner’s manual for future reference.
NOTE:
This manual may be subject to updates or changes. Up to date manuals are
available through our website at
www.lifespanfitness.com.au
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Read all instructions before using this product.
Please keep this manual with you at all times
-
It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. Please note: It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.
-
Before starting any exercise program, you should consult your doctor to determine if you have any medical or physical conditions that could put your health and safety at risk, or prevent you from using the equipment properly. Your doctor’s advice is essential if you are taking medication that affects your heart rate, blood pressure or cholesterol level.
-
Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, and extreme shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do experience any of these symptoms, you should consult your doctor before continuing with your exercise program.
-
Keep children and pets away from the equipment. This equipment is designed for adult use only.
-
Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 2 meters of free space around it. -
Before using the equipment, check that the nuts and bolts are securely tightened. If you hear any unusual noises coming from the equipment during use and assembly, stop immediately. Do not use the equipment until the problem has been rectified.
-
Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught in the equipment or that may restrict or prevent movement.
-
Care must be taken when lifting or moving the equipment so as not to injure your back.
-
Always keep this instruction manual and assembly tools at hand for reference.
-
The equipment is not suitable for therapeutic use.
CARE INSTRUCTIONS
- Lubricate moving joints with silicon spray after periods of usage.
- Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects.
- The machine can be kept clean by wiping it down using dry cloth.
- Regularly check all moving parts and grasp whether there are signs of wear and damage, and if any, stop using the device immediately and contact the rear of my department.
- During inspection, all bolts and nuts must be fully fixed. If bolts or nuts are loose, please secure them in place.
- Check that the weld is free of cracks.
- Failure to perform daily maintenance may result in personal injury or equipment damage.
PARTS LIST
Key No. | Description | Qty. |
---|---|---|
1 | Under Main Frame | 1 |
2 | Feet Pad | 1 |
3 | Side Ground Tube | 2 |
4 | Stand Tube | 1 |
5 | Right Side Support Tube | 1 |
6 | Left Side Support Tube | 1 |
7 | Back Support Tube | 1 |
8 | Hexagon Bolt M12x95 | 10 |
9 | Washer Φ12 | 28 |
10 | Lock Nut M12 | 14 |
11 | Hexagon Bolt M10x25 | 8 |
12 | Washer Φ10 | 8 |
13 | Hexagon Bolt M12x105 | 4 |
14 | Side Support Tube | 2 |
15 | Ground Tube | 1 |
16 | Short Ground Tube | 1 |
17 | Back Slope Support port Tube | 1 |
18 | Bend Frame | 1 |
19 | Flat Head Bolt | 1 |
20 | Rotation Axle | |
Φ12×92 | 1 | |
21 | Hexagon Bolt M12x80 | 1 |
22 | Lock Nut M10 | 2 |
23 | Big Washer Φ10xΦ25 | 4 |
24 | Big Washer Φ10x Φ30 | 1 |
25 | Inside Adjustable Tube | 1 |
26 | Back Cushion Adjust Rotation Part | 1 |
27 | Leg Lift Bending Tube | 1 |
28 | Pull Bar | 1 |
29 | Magnetic Pin | 1 |
30 | Chest Pad Adjust Tube | 1 |
31 | Chest Pad | 1 |
32 | Washer Φ8 | 6 |
33 | Seat Cushion | 1 |
34 | Hexagon Bolt M8x55 | 4 |
35 | Hexagon Bolt M8x25 | 2 |
36 | New Back Cushion | 1 |
37 | Back Cushion Tube | 1 |
38 | Sponge rod-new | 3 |
39 | Seat Cushion Support frame | 1 |
40 | Shoulder Press Double Connecting | 1 |
41 | Back Barbell Hanging Tube | 1 |
42 | High Pull Connecting Tube | 1 |
43 | Shoulder Press Bending Tube | 1 |
44 | Push Shoulder Part | 1 |
45 | Barbell Bar Plate Inner Rod | 2 |
46 | L Shape Safely Hook | 1 |
47 | Hexagon Bolt M12x75 | 4 |
48 | Hexagon Bolt M12x70 | 2 |
49 | Hexagon Bolt M12x55 | 2 |
50 | Barbell Clamp Collar Φ50 | 5 |
75 | Bolt M12x70 | 2 |
76 | Bolt M12x75 | 4 |
77 | Shoulder Press Set | 1 |
78 | Barbell Plate Inside Tube | 2 |
79 | Tube cap φ60×60 | 1 |
80 | Stainless Steel Outer Casing φ51xt1.0 x310 | 4 |
81 | Aluminium Cap | 4 |
82 | Handlebar Grip | 2 |
83 | Shoulder Press Connecting Plate | 1 |
84 | Pin | 1 |
85 | Shoulder Press Connecting Plate | 1 |
ASSEMBLY INSTRUCTIONS
STEP 1 – EXPLODED DIAGRAM
Key No. | Description | Qty. |
---|---|---|
1 | Under Main Frame | 1 |
2 | Feet Pad | 1 |
3 | Side Ground Tube | 2 |
4 | Stand Tube | 1 |
5 | Right Side Support Tube | 1 |
6 | Left Side Support Tube | 1 |
7 | Back Support Tube | 1 |
8 | Hexagon Bolt M12x95 | 10 |
9 | Washer Φ12 | 14 |
10 | Lock Nut M12 | 14 |
11 | Hexagon Bolt M10x25 | 8 |
12 | Washer Φ10 | 8 |
13 | Hexagon Bolt M12x105 | 4 |
STEP 1 – INSTRUCTIONS
- Connect feet pad-2 and under main frame-1 using M12x95 hexagon bolt- 8, φ12 washer-9 and lock it using M12 lock nut-10.
- Assemble side ground tube-3 on two side of the under main frame-1 using M12x95 hexagon bolt-8, φ12 washer-9 and lock it using M12 lock nut-10.
- Assemble stand tube-4 on under main frame-1 using M10x25 hexagon bolt-11, φ10 washer-12.
- Assemble right side support tube-5, left side support tube-6 on two side of the stand tube-4 using M12x105 hexagon bolt-13, φ12 washer-9 and lock it using M12 lock nut- 10. Then assemble them on ground tube-3 using M12x95 hexagon bolt-8, φ12 washer-9 and lock it using M12 lock nut-10.
- Assemble back support tube-7 on stand tube-4 using M12x105 hexagon bolt-13, φ12 washer-9 and lock it using M12 lock nut-10. Then assemble it on under main frame-1 using M12x95 hexagon bolt-8, φ12 washer-9 and lock it using M12 lock nut-10.
STEP 2 – EXPLODED DIAGRAM
Key No. | Description | Qty. |
---|---|---|
14 | Side Support Tube | 2 |
15 | Ground Tube | 1 |
16 | Short Ground Tube | 1 |
17 | Back Slope Support Tube | 1 |
18 | Bend Frame | 1 |
19 | Flat Head Bolt | 1 |
20 | Rotation Axle Φ12×92 | 1 |
8 | Hexagon Bolt M12x95 | 2 |
9 | Washer Φ12 | 3 |
10 | Lock Nut M12 | 5 |
11 | Hexagon Bolt M10x25 | 2 |
12 | Washer Φ10 | 1 |
21 | Hexagon Bolt M12x80 | 2 |
22 | Lock Nut M10 | 4 |
23 | Big Washer Φ10xΦ25 | 1 |
24 | Big Washer Φ10xΦ30 | 1 |
STEP 2 – INSTRUCTIONS
- Assemble short ground tube-16 on ground tube-15 using M12x95 hexagon bolt-8, φ12 washer-9 and lock it using M12 lock nut-10.
- Assemble ground tube-15 on under main frame-1 using M10x25 hexagon bolt-11, φ10xφ30 big washer-24 and plug flat head bolt-19 in suitable position.
- Assemble side support tube-14 on ground tube-15 using M10x25 hexagon bolt-11, φ10xφ25 big washer-23.
- Assemble back slope support tube-17 on ground tube-15 using M10 lock nut-22, φ10 washer-12, rotation axle-20.
- Assemble side support tube-14 on bend frame-18 using M10x25 hexagon bolt-11, φ10xφ25 big washer-23.
- Assemble back slope support tube-17 on bend frame-18 using M1280 hexagon bolt-21, φ12 washer-9.
Assemble back support tube-7 on stand tube-4 using M12105 hexagon bolt-13, φ12 washer-9 and lock it using M12 lock nut-10. Then assemble it on under main frame-1 using M12*95 hexagon bolt-8, φ12 washer-9 and lock it using M12 lock nut-10.
STEP 3 – EXPLODED DIAGRAM
Key No. | Description | Qty. |
---|---|---|
25 | Inside Adjustable Tube | 1 |
19 | Flat Head Bolt | 2 |
26 | Back Cushion Adjust Rotation Part | 1 |
27 | Leg Lift Bending Tube | 1 |
28 | Pull Bar | 1 |
12 | Washer Φ10 | 2 |
11 | Hexagon Bolt M10x25 | 5 |
29 | Magnetic Pin | 1 |
30 | Chest Pad Adjust Tube | 1 |
31 | Chest Pad | 1 |
32 | Washer Φ8 | 6 |
33 | Seat Cushion | 1 |
34 | Hexagon Bolt M8x55 | 4 |
35 | Hexagon Bolt M8x25 | 2 |
36 | New Back Cushion | 1 |
37 | Back Cushion Tube | 1 |
24 | Big Washer Φ10xΦ30 | 2 |
38 | Sponge Rod-new | 3 |
39 | Seat Cushion Support Frame | 1 |
STEP 3 – INSTRUCTIONS
-
Assemble leg lift bending tube-27 on bend frame-18 using M10x25 hexagon bolt-11, φ10 washer-12.
Screw off the inner bolt of sponge rod-new-38 and assemble it on leg lift bending tube-27 using internal hexagonal wrench to lock nut.
Fix pull bar-28 and plug flat head bolt-19 on suitable position. -
Assemble chest pad-31 on chest pad adjust tube-30 using M8x25 hexagon bolt-35, φ8 washer-32 and assemble Installed part on bend frame-18.
-
Assemble seat cushion-33 on seat cushion support frame-39 using M8x55 hexagon bolt-34, φ8 washer-32.
-
Screw off M10 lock nut-22 on seat cushion support frame-39 and assemble it on bend frame-18. Plug flat head bolt-19 to adjust angle.
-
Assemble back cushion adjust rotation part-26 on inside adjustable tube-25 using M10x25 hexagon bolt-11 to lock the bottom hole of inside adjustable tube-25.
-
Assemble new back cushion-36 on back cushion tube-37 Screw off M10 lock nut-22 on back cushion tube-37 and assemble it on bend frame-18.
-
Assemble back cushion adjust rotation part-26 on bend frame-18 using M10x25 hexagon bolt-11, φ10xφ30 big washer-24. Assemble back cushion tube-37 on the inside adjustable tube-25 using M10x25 hexagon bolt-11, φ10xφ30 big washer-24. Assemble back support tube-7 on stand tube-4 using M12x105 hexagon bolt-13, φ12 washer-9 and lock it using M12 lock nut-10. Then assemble it on under main frame-1 using M12x95 hexagon bolt-8, φ12 washer-9 and lock it using M12 lock nut-10.
STEP 4 – EXPLODED DIAGRAM
Key No. | Description | Qty. |
---|---|---|
40 | Shoulder Press Double Connecting | 1 |
41 | Back Barbell Hanging Tube | 1 |
42 | High Pull Connecting Tube | 1 |
43 | Shoulder Press Bending Tube | 1 |
44 | Push Shoulder Part | 1 |
45 | Barbell Bar Plate Inner Rod | 2 |
46 | L Shape Safely Hook | 1 |
47 | Hexagon Bolt M12x75 | 4 |
9 | Washer Φ12 | 14 |
10 | Lock Nut M12 | 6 |
48 | Hexagon Bolt M12x70 | 2 |
11 | Hexagon Bolt N10x25 | 2 |
12 | Washer Φ10 | 2 |
49 | Hexagon Bolt M12x55 | 2 |
50 | Barbell Clamp Collar Φ50 | 5 |
- Assemble high pull connecting tube-42 on stand tube-4 using M12x55 hexagon bolt-49 φ12 washer-9 and lock it using M12 lock nut-10.
- Assemble back barbell hanging tube-41 on high pull connecting tube-42 using M12x55 hexagon bolt 49 φ12 washer-9 and lock it using M12 lock nut-10.
- Screw off M10*25 hexagon bolt-11 φ10xφ30 big washer-24 on shoulder press double connecting-40 then assemble them on back barbell hanging tube-41, stand tube-4 using M10x25 hexagon bolt-11, φ10 washer-12 to lock nut.
- Assemble shoulder press bending tube-43 on shoulder press double connecting-40 using M12x75 hexagon bolt-47, φ12 washer-9 and lock it using M12 lock nut-10. Secure it using M12x70 hexagon bolt 48, φ12 washer-9.
- Assemble push shoulder part-44 on shoulder press bending tube-43 using M10x25 hexagon bolt-11, φ10 washer-12 to lock nut.
- Assemble barbell bar plate inner rod-45 on right side support tube-5, left side support tube-6.
- Assemble L shape safety hook-46 on stand tube-4.
- Assemble barbell clamp collar-50 on leg lift bending tube-27, back barbell hanging tube-41, barbell bar plate inner rod-45.
EXERCISE GUIDE
PLEASE NOTE:
Before beginning any exercise program, consult your physician. This is
important for individuals over the age of 45 or with pre-existing health
problems.
The pulse sensors are not medical devices. Various factors, including the
user’s movement, may affect the accuracy of heart rate readings. The pulse
sensors are intended only as an exercise aid in determining heart rate trends
in general.
Exercising is great way to control your weight, improve your fitness and
reduce the effect of aging and stress. The key to a healthy lifestyle is to
make exercise a regular and enjoyable part of your everyday life.
The condition of your heart and lungs and how efficient they are in delivering
oxygen via your blood to your muscles is an important factor to your fitness.
Your muscles use this oxygen to provide enough energy for daily activity.
This is called aerobic activity. When you are fit, your heart will not have to
work so hard. It will pump a lot fewer times per minute, reducing the strain
on your heart.
So as you can see, the fitter you are, the healthier and greater you will
feel.
WARM UP
Start each workout with 5 to 10 minutes of stretching and some light
exercises. A proper warm-up increases your body temperature, heart rate and
circulation in preparation for exercise. Ease into your exercise.
After warming up, increase the intensity to your desired exercise program. Be
sure to maintain your intensity for maximum performance. Breathe regularly and
deeply as you exercise.
COOL DOWN
Finish each workout with a light jog or walk for at least 1 minute. Then
complete 5 to 10 minutes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent postexercise problems.
WORKOUT GUIDELINES
This is how your pulse should behave during general fitness exercise. Remember to warm up and cool down for a few minutes.
WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer.
In addition, they come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage.
You are entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Full details of your consumer rights may be found at
www.consumerlaw.gov.au.
Please visit our website to view our full warranty terms and conditions:
http://www.lifespanfitness.com.au/warranty-repairs
WARRANTY AND SUPPORT
Any claim against this warranty must be made through your original place of
purchase.
Proof of purchase is required before a warranty claim may be processed.
If you have purchased this product from the Official Lifespan Fitness website,
please visit https://lifespanfitness.com.au/warranty-form
For support outside of warranty, if you wish to purchase replacement parts or
request a repair or service, please visit https://lifespanfitness.com.au
/warranty-form and fill in our Repair/Service Request Form or Parts Purchase
Form.
Scan this QR code with your device to go to lifespanfitness.com.au/warranty-
form
https://www.lifespanfitness.com.au/pages/product-support-form
References
- Product Support Forms – Lifespan Fitness
- Home | Consumer Law
- Lifespan Fitness | Treadmills, Cardio and Strength Equipment
- Warranty & Repairs - Gym Equipment – Lifespan Fitness
- Product Support Forms – Lifespan Fitness
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>