AOC Q27G2S-EU LCD Monitor User Manual
- June 13, 2024
- AOC
Table of Contents
Q27G2S-EU LCD Monitor
Product Information
| Product Name | LCD Monitor |
|---|---|
| Model | Q27G2S/EU |
| Manufacturer | TM |
Product Usage Instructions
Safety
– The monitor should be operated only from the type of power
source indicated on the label. If you are not sure of the type of
power supplied to your home, consult your dealer or local power
company.
– The monitor is equipped with a three-pronged grounded plug. If
your outlet does not accommodate the three-wire plug, have an
electrician install the correct outlet, or use an adapter to ground
the appliance safely.
– Unplug the unit during a lightning storm or when it will not be
used for long periods of time to protect it from power
surges.
– Do not overload power strips and extension cords. Use the monitor
only with UL listed computers which have appropriate configured
receptacles marked between 100-240V AC, Min. 5A.
– The wall socket shall be installed near the equipment and shall
be easily accessible.
Installation
– Do not place the monitor on an unstable cart, stand, tripod,
bracket, or table. Use only a cart, stand, tripod, bracket, or
table recommended by the manufacturer or sold with this
product.
– Never push any object into the slot on the monitor cabinet. Avoid
spilling liquids on the monitor.
– Do not place the front of the product on the floor.
– If you mount the monitor on a wall or shelf, use a mounting kit
approved by the manufacturer and follow the kit instructions.
– Leave some space around the monitor for proper air-circulation to
prevent overheating. Do not tilt the monitor downward by more than
-5 degrees to avoid potential damage. See recommended ventilation
areas in the user manual for wall or stand installation.
Cleaning
– Clean the cabinet regularly with a cloth. You can use a
soft-detergent to wipe out stains, instead of strong-detergent
which may damage the product cabinet.
LCD Monitor User Manual
Q27G2S/EU
TM
www.aoc.com ©2021 AOC.All Rights Reserved
1
Safety …………………………………………………………………………………………………………………………………………………………….. 1
National Conventions ……………………………………………………………………………………………………………………………… 1 Power
…………………………………………………………………………………………………………………………………………………… 2 Installation
…………………………………………………………………………………………………………………………………………….. 3 Cleaning
……………………………………………………………………………………………………………………………………………….. 4 Other
……………………………………………………………………………………………………………………………………………………. 5
Setup ……………………………………………………………………………………………………………………………………………………………… 6 Contents
in Box……………………………………………………………………………………………………………………………………… 6 Setup Stand &
Base……………………………………………………………………………………………………………………………….. 7 Adjusting Viewing
Angle………………………………………………………………………………………………………………………….. 8 Connecting the Monitor
…………………………………………………………………………………………………………………………… 9 G-SYNC function
…………………………………………………………………………………………………………………………………. 10
Adjusting …………………………………………………………………………………………………………………………………………………………11 Hotkeys
………………………………………………………………………………………………………………………………………………..11 OSD Setting
………………………………………………………………………………………………………………………………………… 12 Luminance
………………………………………………………………………………………………………………………………… 13 Color
Setup……………………………………………………………………………………………………………………………….. 14 Picture Boost
…………………………………………………………………………………………………………………………….. 15 OSD
Setup………………………………………………………………………………………………………………………………… 16 Game
Setting…………………………………………………………………………………………………………………………….. 17 Extra
………………………………………………………………………………………………………………………………………… 18
Exit…………………………………………………………………………………………………………………………………………… 19 LED Indicator
………………………………………………………………………………………………………………………………………. 19
Troubleshoot………………………………………………………………………………………………………………………………………………….. 20
Specification ………………………………………………………………………………………………………………………………………………….. 21
General Specification ……………………………………………………………………………………………………………………………. 21
Preset Display Modes …………………………………………………………………………………………………………………………… 22 Pin
Assignments…………………………………………………………………………………………………………………………………… 23 Plug and Play
………………………………………………………………………………………………………………………………………. 24
i
Safety
National Conventions
The following subsections describe notational conventions used in this
document. Notes, Cautions, and Warnings Throughout this guide, blocks of text
may be accompanied by an icon and printed in bold type or in italic type.
These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of
your computer system. CAUTION: A CAUTION indicates either potential damage to
hardware or loss of data and tells you how to avoid the problem. WARNING: A
WARNING indicates the potential for bodily harm and tells you how to avoid the
problem. Some warnings may appear in alternate formats and may be
unaccompanied by an icon. In such cases, the specific presentation of the
warning is mandated by regulatory authority.
1
Power
The monitor should be operated only from the type of power source indicated on
the label. If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a
third (grounding) pin. This plug will fit only into a grounded power outlet as
a safety feature. If your outlet does not accommodate the three-wire plug,
have an electrician install the correct outlet, or use an adapter to ground
the appliance safely. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long
periods of time. This will protect the monitor from damage due to power
surges.
Do not overload power strips and extension cords. Overloading can result in
fire or electric shock. To ensure satisfactory operation, use the monitor only
with UL listed computers which have appropriate configured receptacles marked
between 100-240V AC, Min. 5A. The wall socket shall be installed near the
equipment and shall be easily accessible.
2
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or
table. If the monitor falls, it can injure a person and cause serious damage
to this product. Use only a cart, stand, tripod, bracket, or table recommended
by the manufacturer or sold with this product. Follow the manufacturer’s
instructions when installing the product and use mounting accessories
recommended by the manufacturer. A product and cart combination should be
moved with care.
Never push any object into the slot on the monitor cabinet. It could damage
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
Do not place the front of the product on the floor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by
the manufacturer and follow the kit instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation
may be inadequate hence overheating may cause a fire or damage to the monitor.
To avoid potential damage, for example the panel peeling from the bezel,
ensure that the monitor does not tilt downward by more than -5 degrees. If the
-5 degree downward tilt angle maximum is exceeded, the monitor damage will not
be covered under warranty.
See below the recommended ventilation areas around the monitor when the
monitor is installed on the wall or on the stand:
Installed with stand
12 inches 30cm
4 inches 10cm
4 inches 10cm
Leave at lease this space around the set
4 inches 10cm
3
Cleaning
Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out
the stain, instead of strong-detergent which will cauterize the product
cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning
cloth should not be too rough as it will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
4
Other
If the product is emitting a strange smell, sound or smoke, disconnect the
power plug IMMEDIATELY and contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions
during operation. Do not knock or drop the monitor during operation or
transportation.
5
Setup
Contents in Box
Monitor
CD Manual
Warranty Card
Base
Stand
Power Cord
HDMI Cord
DP Cord
Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
6
Setup Stand & Base
Please setup or remove the base following the steps as below. Setup:
Remove:
7
Adjusting Viewing Angle
For optimal viewing it is recommended to look at the full face of the monitor,
then adjust the monitor’s angle to your own preference. Hold the stand so you
will not topple the monitor when you change the monitor’s angle. You are able
to adjust the monitor as below:
NOTE: Do not touch the LCD screen when you change the angle. It may cause
damage or break the LCD screen. Warning 1. To avoid potential screen damage,
such as panel peeling, ensure that the monitor does not tilt downward by more
than -5 degrees. 2. Do not press the screen while adjusting the angle of the
monitor. Grasp only the bezel.
8
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
2 13 4 5
1. HDMI-2 2. HDMI-1 3. DisplayPort 4. Earphone 5. AC in Connect to PC 1.
Connect the power cord to the back of the display firmly. 2. Turn off your
computer and unplug its power cable. 3. Connect the display signal cable to
the video connector on the back of your computer. 4. Plug the power cord of
your computer and your display into a nearby outlet. 5. Turn on your computer
and display. If your monitor displays an image, installation is complete. If
it does not display an image, please refer Troubleshooting. To protect
equipment, always turn off the PC and LCD monitor before connecting.
9
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately.
Disconnect power before this procedure. Follow these steps:
1. Remove the base. 2. Follow the manufacturer’s instructions to assemble the
wall mounting arm. 3. Place the wall mounting arm onto the back of the
monitor. Line up the holes of the arm with the holes in the back of
the monitor. 4. Reconnect the cables. Refer to the user’s manual that came
with the optional wall mounting arm for instructions on
attaching it to the wall.
Noted: VESA mounting screw holes are not available for all models, please
check with the dealer or official department of AOC.
0°
90°
-5°
- Display design may differ from those illustrated.
Warning
1. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
2. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
10
G-SYNC function
Compatible Graphics Card: GeForece GTX 650 Ti Boost or higher (for a list of
compatible graphics cards, please visit https://www.nvidia.com/en-
in/geforce/products/g-sync-monitors/g-sync-hdr-requirements/) Driver: GeForece
331.58 or higer OS: Windows 7/8/8.1
11
Adjusting
Hotkeys
1 2345
1 Source/Exit 2 Game Mode/< 3 Dial Point/> 4 Menu/Enter 5 Power
Source/Exit When the OSD is closed, press ” When the OSD is closed, press ” with D-Sub).
” button will be Source hot key function. ” button continuously about 2 seconds to do auto configure (Only for the models
Game Mode/< When there is no OSD, press “<” key to open game mode function, then press “<” or “>” key to select game mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.
Dial Point When there is no OSD, press Dial Point button to active Dial Point menu, and then press “<” or “>” to set Dial Point on or off.
Menu/Enter When there is no OSD, Press to display the OSD or confirm the selection.
Power Turn on/off the monitor.
12
OSD Setting
Basic and simple instruction on the control keys.
Luminance Contrast Brightness Eco mode
Color Setup
Picture Boost
OSD Setup
Game Setting
Extra
Exit
50 90 Standard
Gamma DCR HDR Mode
Gamma 1 Off Off
1). Press the MENU-button to activate the OSD window.
2). Press Left or Right to navigate through the functions. Once the desired
function is highlighted, press the MENUbutton to activate it, press Left or
Right to navigate through the sub-menu functions. Once the desired function is
highlighted, press MENU-button to activate it.
3). Press Left or Right to change the settings of the selected function. Press
AUTObutton to exit. If you want to adjust any other function, repeat steps
2-3.
4). OSD Lock/Unlock Function: OSD Lock Function: To lock the OSD, press and
hold the MENU button while the monitor is off and then press power button to
turn the monitor on. To un-lock the OSD – press and hold the MENU button while
the monitor is off and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is
disable to adjust. 2). ECO modes (except Standard mode), DCR, DCB mode and
Picture Boost, for these four states that only one state
can exist.
13
Luminance
Luminance Contrast Brightness Eco mode
Color Setup
Picture Boost
OSD Setup
Game Setting
Extra
Exit
50 90 Standard
Gamma DCR HDR Mode
Gamma 1 Off Off
Contrast Brightness
0-100 0-100 Standard
Contrast from Digital-register. Backlight Adjustment Standard Mode
Text
Text Mode
Internet
Internet Mode
Eco mode
Game
Game Mode
Movie
Movie Mode
Sports
Sports Mode
Reading
Reading Mode
Gamma1
Adjust to Gamma 1
Gamma
Gamma2
Adjust to Gamma 2
Gamma3
Adjust to Gamma 3
DCR HDR HDR Mode
Off
On
Off / DisplayHDR / HDR Picture / HDR Movie / HDR Game Off / HDR Picture / HDR
Movie / HDR Game
Disable dynamic contrast ratio Enable dynamic contrast ratio Disable or Enable HDR Disable or Enable HDR Mode
Note: When HDR is detected, the HDR option is displayed for adjustment; when HDR is not detected, the HDR Mode option is displayed for adjustment.
14
Color Setup
Color Setup
Color Temp. DCB Mode DCB Demo
Picture Boost Warm Off Off
OSD Setup
Game Setting
Red Green Blue
Extra
Exit
50 50 50
Luminance
Color Temp.
DCB Mode
DCB Demo Red Green Blue
Warm Normal Cool sRGB
User
Full Enhance Nature Skin Green Field Sky-blue AutoDetect OFF
Red Green Blue on or off on or off on or off on or off on or off on or off On or off 0-100 0-100 0-100
Recall Warm Color Temperature from EEPROM. Recall Normal Color Temperature from EEPROM. Recall Cool Color Temperature from EEPROM. Recall SRGB Color Temperature from EEPROM. Red Gain from Digital-register Green Gain Digital- register. Blue Gain from Digital-register Disable or Enable Full Enhance Mode Disable or Enable Nature Skin Mode Disable or Enable Green Field Mode Disable or Enable Sky-blue Mode Disable or Enable AutoDetect Mode Disable or Enable DCB Mode Disable or Enable Demo Red gain from Digital-register. Green gain from Digital-register. Blue gain from Digital-register.
15
Picture Boost
Picture Boost
OSD Setup
Game Setting
Extra
Exit
Luminance
Color Setup
Bright Frame
off
Brightness
50
H. Position
0
Frame Size
14
Contrast
50
V. Position
0
Bright Frame Frame Size Brightness Contrast H. position V. position
on or off 14-100 0-100 0-100 0-100 0-100
Disable or Enable Bright Frame Adjust Frame Size Adjust Frame Brightness Adjust Frame Contrast Adjust Frame horizontal Position Adjust Frame vertical Position
Note: Adjust the brightness, contrast, and position of the Bright Frame for better viewing experience.
16
OSD Setup
OSD Setup Language Timeout DP Capability
Game Setting
Extra
English 10
1.2/1.4
Exit
Luminance
H. Position V. Position Volume
Color Setup
Picture Boost
50
Transparence
25
0
Break Reminder
Off
50
Language Timeout DP Capability H. Position V. Position Volume Transparence Break Reminder
5-120 1.1/1.2/1.4 0-100 0-100 0-100 0-100 on or off
Select the OSD language
Adjust the OSD Timeout Please be noted that only DP1.2/1.4 support G-SYNC
function Adjust the horizontal position of OSD
Adjust the vertical position of OSD
Volume Adjustment.
Adjust the transparence of OSD Break reminder if the user continuously work
for more than 1hrs
Note: If the DP video content supports DP1.2/1.4, please select DP1.2/1.4 for DP Capability; otherwise, please select DP1.1
17
Game Setting
Game Setting Game Mode Shadow Control Low Input Lag
Extra Off
50 Off
Exit
Luminance
Game Color
LowBlue Mode
Off
Overdrive
Off
Color Setup
Picture Boost
10
G-SYNC
Frame Counter
MBR
OSD Setup Off Off
0
Game Mode
Shadow Control Low Input Lag Game Color Low Blue Mode
Overdrive G-SYNC Frame Counter MBR
OFF FPS RTS Racing Gamer 1 Gamer 2 Gamer 3
0-100
On/Off 0-20 Reading / Office / Internet / Multimedia / Off Weak Medium Strong
Boost Off ON/OFF Off / Right-up / Right-Down / Left-Down / LeftUp 0 ~ 20
No optimization by Smart image game For playing FPS (first Person Shooters)
games. Improves dark theme black level details. For playing RTS (Real Time
Strategy). Improves the image quality. For playing Racing games, Provides
fastest response time and high color saturation. User’s preference settings
saved as Gamer 1. User’s preference settings saved as Gamer 2. User’s
preference settings saved as Gamer 3. Shadow Control Default is 50, then end-
user can adjust from 50 to 100 or 0 to increase contrast for clear picture. 1.
If picture is too dark to be saw the detail clearly,
adjusting from 50 to100 for clear picture. 2. If picture is too white to be
saw the detail clearly,
adjusting from 50 to0 for clear picture Turn off frame buffer to decrease
input lag Game Color will provide 0-20 level for adjusting saturation to get
better picture. Decrease blue light wave by controlling color temperature.
Adjust the response time.
Adjust the G-SYNC.
Display V frequency on the corner selected
Adjust the Motion Blur Reduction.
Note: The function MBR and Overdrive Boost are available only when G-SYNC is off and the vertical frequency is up to 75 Hz.
18
Extra
Extra Input Select Off Timer Image Ratio
Exit
Luminance
Auto 00 Wide
Color Setup DDC/CI Reset
Picture Boost Yes No
OSD Setup
Game Setting
Resolution : 1920(H)X1080(V) H. Frequency : 67KHz V. Frequency : 60Hz
Input Select Off timer
Image Ratio
DDC/CI Reset
0-24hrs Wide 4:3 1:1 17″ (4:3) 19″ (4:3) 19″ (5:4) 19″W (16:10) 21.5″W (16:9) 22″W (16:10) 23″W (16:9) 23.6″W (16:9) 24″W (16:9) yes or no yes or no ENERGY STAR® or no
Select Input Signal Source Select DC off time
Select image ratio for display.
Turn ON/OFF DDC/CI Support Reset the menu to default. (ENERGY STAR® available
for selective models.)
19
Exit
Exit
Luminance
Color Setup
Picture Boost
OSD Setup
Game Setting
Extra
Exit
LED Indicator
Status Full Power Mode Active-off Mode
LED Color White Orange
Exit the main OSD
20
Troubleshoot
Problem & Question
Possible Solutions
Power LED Is Not ON
No images on the screen
Picture Is Fuzzy & Has Ghosting Shadowing Problem Picture Bounces, Flickers Or
Wave Pattern Appears In The Picture
Monitor Is Stuck In Active OffMode” Missing one of the primary colors (RED,
GREEN, or BLUE) Screen image is not centered or sized properly Picture has
color defects (white does not look white)
Make sure the power button is ON and the Power Cord is properly connected to a
grounded power outlet and to the monitor.
Is the power cord connected properly? Check the power cord connection and
power supply. Is the cable connected correctly? (Connected using the VGA
cable) Check the VGA cable connection. (Connected using the HDMI cable) Check
the HDMI cable connection. (Connected using the DP cable) Check the DP cable
connection. * VGA/HDMI/DP input is not available on every model. If the power
is on, reboot the computer to see the initial screen (the login screen), which
can be seen. If the initial screen (the login screen) appears, boot the
computer in the applicable mode (the safe mode for Windows 7/8/10) and then
change the frequency of the video card. (Refer to the Setting the Optimal
Resolution) If the initial screen (the login screen) does not appear, contact
the Service Center or your dealer. Can you see “Input Not Supported” on the
screen? You can see this message when the signal from the video card exceeds
the maximum resolution and frequency that the monitor can handle properly.
Adjust the maximum resolution and frequency that the monitor can handle
properly. Make sure the AOC Monitor Drivers are installed. Adjust the Contrast
and Brightness Controls. Press to auto adjust. Make sure you are not using an
extension cable or switch box. We recommend plugging the monitor directly to
the video card output connector on the back. Move electrical devices that may
cause electrical interference as far away from the monitor as possible. Use
the maximum refresh rate your monitor is capable of at the resolution you are
using. The Computer Power Switch should be in the ON position. The Computer
Video Card should be snugly fitted in its slot. Make sure the monitor’s video
cable is properly connected to the computer. Inspect the monitor’s video cable
and make sure no pin is bent. Make sure your computer is operational by
hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED.
The LED should either turn ON or OFF after hitting the CAPS LOCK key.
Inspect the monitor’s video cable and make sure that no pin is damaged. Make
sure the monitor’s video cable is properly connected to the computer.
Adjust H-Position and V-Position or press hot-key (AUTO).
Adjust RGB color or select desired color temperature.
Horizontal or vertical disturbances on the screen
Use Windows 7/8/10 shut-down mode to adjust CLOCK and FOCUS. Press to auto- adjust.
Regulation & Service
Please refer to Regulation & Service Information which is in the CD manual or www.aoc.com (to find the model you purchase in your country and to find Regulation & Service Information in Support page.)
21
Specification
General Specification
Panel
Others
Physical Characteristics Environmental
Model name
Q27G2S/EU
Driving system
TFT Color LCD
Viewable Image Size
68.5cm diagonal
Pixel pitch Horizontal scan range
0.2331mm(H) x 0.2331mm(V)
30k-230kHz (HDMI) 30k-255kHz (DP)
Horizontal scan Size(Maximum) 596.736mm
Vertical scan range
48-144Hz (HDMI) 48-165Hz (DP)
Vertical Scan Size(Maximum) 335.664mm
Optimal preset resolution Max resolution Plug & Play
2560×1440@60Hz 2560×1440@144Hz (HDMI) 2560×1440@165Hz (DP) VESA DDC2B/CI
Power Source
100-240V~, 50/60Hz,1.5A
Power Consumption
Typical(Brightness = 90,Contrast = 50) 27W Max. (brightness = 100, contrast =100) 63W
Power saving
0.5W
Connector Type
HDMI/DP/Earphone out
Signal Cable Type
Detachable
Temperature
Operating Non-Operating
0°~ 40° -25°~ 55°
Humidity
Operating Non-Operating
10% ~ 85% (non-condensing) 5% ~ 93% (non-condensing)
Altitude
Operating Non-Operating
0~ 5000 m (0~ 16404ft ) 0~ 12192m (0~ 40000ft )
22
Preset Display Modes
STANDARD
VGA
SVGA
XGA
SXGA WXGA+ WSXGA
FHD QHD QHD (DP) DOS DOS VGA SVGA XGA
RESOLUTION 640×480@60Hz
HORIZONTAL FREQUENCY(kHz)
31.469
640×480@72Hz
37.861
640×480@75Hz
37.5
640×480@100Hz
50.313
640×480@120Hz
60.938
800×600@56Hz
35.156
800×600@60Hz
37.879
800×600@72Hz
48.077
800×600@75Hz
46.875
800×600@100Hz
62.76
800×600@120Hz
76.302
1024×768@60Hz
48.363
1024×768@70Hz
56.476
1024×768@75Hz
60.023
1024×768@100Hz
80.448
1024×768@120Hz
97.551
1280×1024@60Hz
63.981
1280×1024@75Hz
79.976
1440×900@60Hz
55.935
1440×900@60Hz
55.469
1680×1050@60Hz
65.29
1680×1050@60Hz
64.674
1920×1080@60Hz
67.5
1920×1080@120Hz
139.1
2560×1440@60Hz
88.787
2560×1440@120Hz
182.997
2560×1440@144Hz
222.056
2560×1440@165Hz
242.55
IBM MODES
640×350@70Hz
31.469
720×400@70Hz
31.469
MAC MODES
640×480@67Hz
35
832×624@75Hz
49.725
1024×768@75Hz
60.241
VERTICAL FREQUENCY(Hz)
59.94 72.809
75 99.826 119.72 56.25 60.317 72.188
75 99.778 119.972 60.004 70.069 75.029 99.811 119.989 60.02 75.025 59.887
59.901 59.954 59.883
60 119.93 59.951 119.998 143.912
165
70.087 70.087
66.667 74.551 74.927
23
Pin Assignments
19-Pin Color Display Signal Cable
Pin No. Signal Name
TMDS Data 2+
TMDS Data 2 Shield
TMDS Data 2-
TMDS Data 1+
TMDS Data 1Shield
TMDS Data 1-
TMDS Data 0+
TMDS Data 0 Shield
Pin No. Signal Name
Pin No. Signal Name
TMDS Data 0-
17. DDC/CEC Ground
10. TMDS Clock +
18. +5V Power
TMDS Clock Shield
19. Hot Plug Detect
12. TMDS Clock-
13. CEC
14. Reserved (N.C. on device)
15. SCL
16. SDA
20-Pin Color Display Signal Cable
Pin No. 1 2 3 4 5 6 7 8 9 10
Signal Name ML_Lane 3 (n) GND ML_Lane 3 (p) ML_Lane 2 (n) GND ML_Lane 2 (p) ML_Lane 1 (n) GND ML_Lane 1 (p) ML_Lane 0 (n)
Pin No. 11 12 13 14 15 16 17 18 19 20
Signal Name GND ML_Lane 0 (p) CONFIG1 CONFIG2 AUX_CH(p) GND AUX_CH(n) Hot Plug Detect Return DP_PWR DP_PWR
24
Plug and Play
Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B
capabilities according to the VESA DDC STANDARD. It allows the monitor to
inform the host system of its identity and, depending on the level of DDC
used, communicate additional information about its display capabilities. The
DDC2B is a bi-directional data channel based on the I2C protocol. The host can
request EDID information over the DDC2B channel.
25
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>