Avantree Shift Wireless Home Entertainment System User Guide

**Avantree Shift Wireless Home Entertainment System User Guide

**

Video Guide

Prefer to watch a video tutorial? Scan the QR code below or visit avantree.com/shift/video for a step-by-step guide.

Personal Setup Guides
 You can also book a 1-on-1 setup appointment with one of our support agents at avantree.com/book-a-call

Box Contents

A. 2 Headphones
B. 2 Transmitters
C. Power Cables for Transmitters
D. 2-in-1 USB C Charging Cable for Headphones
E. 2 Optical Audio Cables (5ft / 1.5m)
F. AUX 3.5mm Audio Cable (5ft / 1.5m)
G. AUX 3.5mm to RCA Adapter (1ft / 35cm)

To view and purchase Shift accessories, please visit avantree.com/shift/accessories

Product Overview

‘Solid blue, green, and white lights represent the three different channels Flashing blue light = pairing mode

‘Solid blue, green, and white lights represent the three different channels
‘OPT / AUX solid light = valid audio signal detected
OPT / AUX flashing = no valid audio signal detected; please adjust TV audio settings

Button Function

Headphone

Channel
| Switch to “ON / OFF” position to turn the headphones on / off
---|---
Switch to “CHANNEL” position once to swap between 3 channels
Hold in “Pair” position for 5 seconds to enter pairing mode
| Press once to switch between balanced and clear voice modes
 | Press once to adjust volume
| Press once to mute / unmute the speaker

TRANSMITTER

| Switch to turn the transmitter on / off
---|---
Channel Select
| Press once to swap between 3 channels
| Press  once to adjust volume
| Press & hold for 5 seconds to enter pairing mode
Volume Setting
Normal Boost| Switch between normal and boost volume

Charging Headphones & Powering Transmitter

Charge the headphones through their power ports using the provided USB C charging cable (Figure D) and a USB adapter (not included — please contact support@avantree.com if you’d like to claim a free one). A solid red light indicates that charging is in progress; once the light turns off, your headphones will be at full battery.

The transmitters do not require charging. However, they must be connected to a power source via the provided power cables (Figure C) in order to function. Plug each transmitter into either:

1. A TV’s USB power port (we recommend this so that they auto power ON / OFF in tandem with your TV), OR
2. A nearby wall outlet (requires USB adapter)

Connecting to Your TV

Once the transmitters are connected to their respective power sources, you can then connect them to each TV’s audio output ports. You can choose one of 3 different ways to do this:

OPTION 1
Optical port (recommended) – plug the provided optical audio cable (Figure E) into the TV’s optical OUT or “OPT / OUT” port, then plug the other end into the transmitter’s optical port in the “INPUT FROM TV” section.

OPTION 2
AUX 3.5mm port – plug the provided AUX 3.5mm audio cable (Figure F) into the TV’s AUX 3.5mm output port, then plug the other end into the transmitter’s AUX 3.5mm input port.

OPTION 3
RCA port – connect the provided RCA adapter (Figure G) to the AUX 3.5mm audio cable (Figure F). Plug the red & white RCA connectors into the TV’s “AUDIO OUT” ports, then plug the other end into the transmitter’s AUX 3.5mm input port.

Double check to ensure that optical / RCA cables are plugged into the audio OUT ports and not the audio IN ports.

Setting Up Your TV

If you connected to your TV via the optical OUT or”OPT / OUT” port, you’ll need to configure your TV settings before you’ll receive audio.

STEP 1
Using your TV’s remote control, press the SETTINGS button and navigate to the AUDIO tab within the settings menu. (Please note that there may be differences in the setting names depending on your brand of TV).

STEP 2
Proceed to AUDIO OUTPUT and select “OPTICAL OUT / EXTERNAL SPEAKER”. Many TVs will do this automatically; skip this step as needed.

STEP 3
Go back to the AUDIO tab in your SETTINGS, then navigate to DIGITAL OUTPUT and turn “PCM / STEREO” ON or “DOLBY” OFF.

If you’re having trouble finding these settings, you can scan the QR code correlating to your TV’s brand OR visit avantree.com/shift/tv-audio-settings for a more detailed guide.

LG

SONY

SAMSUNG

Connecting the Headphones

Now that your transmitters are all set up, all that’s left is connecting the headphones.

STEP 1
First, power everything on.

STEP 2
Switch both the headphones and the transmitter to the same channel using the CHANNEL SELECT button on the transmitter and the CHANNEL switch on the headphones. Their LED channel indicators should show the same color.

Each pair of headphones can work individually with each transmitter (1 pair of headphones per transmitter), or both pairs of headphones can also work with a single transmitter (2 pairs of headphones connected to 1 transmitter). They are fully cross-compatible, so you can swap between TVs and transmitters quickly and easily.

Adding Another Transmitter Headphones

You can add extra Shift transmitters and up to 100 Shift-Extra headphones to your setup. The Shift retains its cross-compatibility when adding an extra Shift transmitter and / or headphones.

STEP 1
Press & hold the “ADD” button on your transmitter for 5 seconds.The”ADD DEVICE” LED indicator will flash blue.

STEP 2
Turn on your pair of Shift-Extra headphones, then slide and hold the power switch to the “PAIR” position for 5 seconds. The LED indicator will flash blue.

STEP 3
Once connected, the channel indicator on both the transmitter and the headphones will switch to a solid blue’. You can then swap channels as desired.

Repeat these steps to add more headphones if needed.

‘Please note that for first time use, the transmitter will always pair & connect to new
headphones via blue channel.

To purchase Shift-Extra headphones or transmitters, scan the QR code below.

SHIFT TRANSMITTER
avantree.com/shift-transmitter

SHIFT EXTRA HEADPHONES
avantree.com/shift-extra-headphones

Listening with a Soundbar

The Shift’s pass-through function allows you to listen through both the headphones and an external soundbar / stereo AVR simultaneously.

STEP 1
Set up the transmitter and connect it to your TV.

STEP 2
Plug an additional optical, 3.5mm AUX, or RCA audio cable into the correlating audio
port in the transmitter’s “BYPASS / SPEAKER” section.

STEP 3
Plug the other end into your external sound system, then you’re good to go.

Specifications

Troubleshooting

Below are some of the most common questions people have during setup. You can find a full FAQ list at avantree.com/support/shift, or contact us directly for additional assistance.

Why don’t I get sound when watching Netflix / Prime Video?
You may need to change your TV’s audio settings an additional time when watching
Netflix / Prime Video. This can be due to the movie being in Dolby Digital Surround
Sound format, or because you’re watching with a separate streaming device / cable box.
While Netflix / Prime Video is open, go into your TV’s audio settings and make sure that the audio output is set to“PCM / STEREO” and that “DOLBY” is turned OFF.

Why won’t my headphones “shift” to the other transmitter?
When shifting headphones to another transmitter, please make sure that the channels match. Otherwise, they may stay connected to the previous transmitter.

Can I have both of the transmitters in the same room?
Yes, you can have 2-3 transmitters in the same room with no interference as long as they stay at least 3 feet apart from each other.

Contact Us

Ticket Support: avantree.com/submit-a-ticket
Support Email: support@avantree.com

• USA/CA: +1800 232 2078 (US Toll Free, 9am-6pm PST, Mon-Fri)
• UK: +44 20 8068 2023 (9am-6pm, GMT, Mon-Sat)
• DE: +49 32221097297 (11am-9pm, CET, Mon-Sat )
• FR: + 33 176340312 (11am-9pm, CET, Mon-Sat )
• IT: +39 06 9480 3330 (9am-6pm, CET, Mon-Sat )
• ES: + 34 931786261 (9am-6pm, CET, Mon-Sat )
• AU: +61 2.8310 9897 (11am-7pm, Sydney Time, Mon-Fri)

Live Chat: _avantree.com (18/h weekday)
Videos: avantree.com/shift/video
Fags: avantree.com/support/shift
Product Registration: avantree.com/product-registration

Model NoWSHT-5599
Dispose of the packaging and this product in accordance with the latest provisions.
Z-PKQG-HTS599-VO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>