UBIQUITI UAP-AC-IW UniFi Access Point Enterprise Wi-Fi System User Guide

UAP-AC-IW
Quick Start Guide

Package Contents

Installation Requirements

IMPORTANT: UniFi Controller v5.4 is recommended for managing the UAP-AC- IW and is available for download at: ui.com/download/uni
Pre-installed electrical wall box

• T10 Torx bit (for Torx Screw option)
• UniFi Switch with PoE

IMPORTANT: The UAP-AC-IW requires an UniFi Switch with PoE for power. Passive PoE adapters are not recommended.
System Requirements

• Linux, Mac OS X, or Microsoft Windows 7/8/10
• Java Runtime Environment 1.6 (1.8 or newer recommended)
• Web Browser: Google Chrome (Other browsers may have limited functionality.)
• UniFi Controller software v5.4 or newer (available at: ui.com/download/uni)

Hardware Overview

Back Panel

1. PoE In + Data
   10/100/1000 Ethernet port supports data and 802.3at PoE+ input. The UAP-AC- IW itself requires 7W.
   802.3at PoE+ input is required to use PoE passthrough. Connect this port to a UniFi Switch with PoE that is connected to your LAN and DHCP server.

Bottom Panel

(Optional) The Security Screw secures the Cover Plate after installation. You have the option to use the included Torx (shown) or Phillips Security Screw.
3. PoE Out + Data
10/100/1000 Ethernet port supports data and PoE passthrough (requires 802.3at PoE+ input). The maximum PoE passthrough output is 12W.
Note: To power and connect an 802.3af device to the LAN, you must use 802.3at PoE+ input.
4. Reset
The Reset button serves two functions for the UAP-AC-IW:

• Restart Press and release the Reset button quickly.
• Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

5. Data
10/100/1000 Ethernet port supports data only. Used to connect a client device to the LAN.

LED

Security Tab
In addition to the optional Security Screw, the Security Tab helps to secure the Cover Plate after installation. If you need to remove it, use a thread screwdriver to depress the Security Tab while detaching the Cover Plate:

|
---|---

The Back Plate offers a variety of mounting holes for use with different wall boxes. Here are a few examples with the appropriate mounting holes outlined in blue:
USA or China

Europe

Hardware Installation

1.

|

2.

---|---

3.

|

4.

OR

|

5.

Optional

|

OR

---|---

Software Installation

Download and install the latest version of the UniFi Controller software. Launch it and follow the on-screen instructions. The software and step-by-step instructions in the User
The guide is available at: ui.com/download/uni
After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the username and the password that you created and click Sign In.

You can manage your wireless network and view network statistics using the UniFi Controller management interface. For information on conjuring and using the UniFi
Controller software, refer to the User Guide.

Mobile App Installation

Ubiquiti also offers the UniFi app, which is available from the App Store® (iOS) or Google Play™ Store (Android). You can use it to provision an UniFi AP for basic functionality without configuring an UniFi Controller. It also allows seamless provisioning of APs for remote controllers (controllers not on the same Layer 2 network) and easy access to local controllers and those monitored on uni.ui.com

Specifications

UAP-AC-IW

Dimensions| 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01″)
Weight| 200 g (6.43 oz)
Networking Interface| (3) 10/100/1000 Ethernet Ports
Button(s)| Reset
Power Method| 802.3at PoE+ Supported
Power Supply| UniFi Switch (PoE)
Power Save| Supported
PoE Out| 48V Passthrough (Pins 1, 2+; 3, 6-)
Max. Power
Consumption with PoE Passthrough| 7W
19W*
Max. TX Power
2.4 GHz
5 GHz| 20 dBm
20 dBm
MIMO
2.4 GHz
5 GHz| 2 x 2
2 x 2
Max. Data Speed
2.4 GHz
5 GHz| 300 Mbps
866.7 Mbps
Max. Range| 100 m (328′)
Antennas| (1) Dual-Band Antenna, Single-Polarity
Antenna Gain
2.4 GHz
5 GHz| 1 dBi
2 dBi
Wi-Fi Standards| 802.11 a/b/g/n/ac
Wireless Security| WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
Mounting| 1-Gang Electrical Wall Box (Not Included)
Operating Temperature| -10 to 50° C (14 to 122° F)
Operating Humidity| 5 to 95% Noncondensing
Certifications| CE, FCC, IC

• Requires 802.3at PoE+ switch.

Operating Frequency (MHz)

US/CA| 2400 – 2483.5
U-NII-1| 5150 – 5250
U-NII-2A| 5250 – 5350
U-NII-2C| 5470 – 5725
U-NII-3| 5725 – 5850
Worldwide| 2400 – 2483.5
5150 – 5875

Safety Notices

3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in a location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment, or pose a re hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.

Limited Warranty

ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specifies arbitration instead of jury trials or class actions.

Compliance

FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area are likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This radio transmitter has been approved by FCC.
CAN ICES-3(A)/NMB-3(A)
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This radio transmitter has been approved by ISED Canada.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
IMPORTANT NOTE
Radiation Exposure Statement

• This equipment complies with radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment, this equipment may cause radio interference.
CE Marking
CE marking on this product represents the product is in compliance with all directives that are applicable to it.

Country List

BFWA (Broadband Fixed Wireless Access) members noted in blue
Note: This device meets Max. TX power limit per ETSI regulations.
The following applies to products that operate in the 5 GHz frequency range:
Note: This device is restricted to indoor use only when operating in the 5150 – 5350 MHz frequency range within all member states.
Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member states. Other countries listed may use the 5.8 GHz, frequency band.
WEEE Compliance Statement
Declaration of Conformity

© 2022 Ubiquiti Inc. All rights reserved.
https://dl.ui.com/qsg/UAP-AC-IW/UAP-AC-IW_EN.html

Documents / Resources

| UBIQUITI UAP-AC-IW UniFi Access Point Enterprise Wi-Fi System [pdf] User Guide
UAP-AC-IW, UniFi Access Point Enterprise Wi-Fi System, UAP-AC-IW UniFi Access Point Enterprise Wi-Fi System, Access Point Enterprise Wi-Fi System, Point Enterprise Wi-Fi System, Enterprise Wi-Fi System, Wi-Fi System
---|---

References

• Ubiquiti - Rethinking IT
• Ubiquiti - Downloads
• Ubiquiti - Warranty
• community.ubnt.com/
• WEEE Compliance Statement
• UAP-AC-IW Quick Start Guide
• Ubiquiti Account
• Software Downloads - Ubiquiti
• UniFi - Rethinking IT - Ubiquiti
• Ubiquiti - Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>