Gude SP18-0 Battery Silicone Gun Instructions
- June 9, 2024
- Gude
Table of Contents
Gude SP18-0 Battery Silicone Gun
Read and understand the operating instructions before using the appliance.
Familiarise with the control elements and how to use the appliance properly.
Abide by all the safety measures stated in the service manual. Act responsibly
toward third parties. The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the appliance. An exception
includes youngsters trained in order to reach knowledge under the supervision
of the trainer during occupational education. In case of any doubts about
connection and operation refer please to our customer center This appliance
has not been designed to be used by persons (including children) with reduced
physical, sensory or mental capabilities or with a lack of knowledge or
experience. Children must be supervised in order not to play with the machine.
WHAT’S INCLUDE
Technical Data
| Battery silicone gun | SP18-0 |
|---|---|
| Art. No | 58415 |
| Input voltage | 18 V |
| Compressive force | 4500 kN |
| Feed rate | 0,7 |
| Cartridge volume | 310 ml |
| Net/gross weight | 2 / 2,6 kg |
Operation
Starting-up the device
Maintenance & Cleaning
Maintenance
Take the replaceable battery from the appliance before any extension,
cleaning and servicing works. Repairs and works specified in these
instructions may only be performed by qualified authorized staff. Use only
original accessories and original spare parts. Keep the device, in particular
the air vents, clean at all times. Never spray water on the device’s body! Do
not clean the plastics with solvents, or flammable or toxic fluids. For
cleaning, use a damp cloth only. Only a regularly maintained and treated
appliance can serve as a satisfactory aid. Insufficient maintenance and care
can lead to unforeseen accidents and injuries. If necessary, a list of spare
parts can be found at www.guede.com.
Specified Conditions of Use
The silicone gun is designed for drawing silicone joints on corners and surfaces. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages. Please note that our equipment has not been designed for commercial, craft or industrial use. If the equipment is used in commercial, craft or industrial operations or for similar activities, we cannot assume any liability. The machine may only be used in a technically perfect condition and taking into account all safety information.
Residual Risk
Even when the device is used properly and all safety regulations are complied
with, there still may be some residual risks.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified
medical attendance as quickly as possible. Protect the injured person from
further harm and calm them down. If you seek help, state the following pieces
of information:
- Accident site,
- Accident type,
- Number of injured persons,
- Injury type(s)
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term „power tool“ in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Work area safety
- a) Keep work area clean and well-lit. Cluttered or dark areas invite accidents.
- b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite the dust or fumes..
- c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
- a) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded..
- b) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Personal safety
- a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- c) Prevent unintentional starting. Ensure the switch is in the off -position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
- d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
- h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
Power tool use and care
- a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
- f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
- g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
- h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
Battery tool use and care
- a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fi re when used with another battery pack.
- b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
- c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
- g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
Service
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
Symbols
Transportation and Storage
Machine to be stored in a dry place.
Disposal
Any damaged or disposed devices must be delivered to appropriate collection
centres.
Transport packaging disposal
The packaging protects the machine against damage during transport. Packaging
materials are usually chosen based on environment aspects and waste treatment
principles and are therefore recyclable. Returning the packaging into material
circulation saves raw materials and reduces waste production. Parts of
packagings (e.g. foils, styropor®) can be dangerous for children. Risk of
suffocation! Keep parts of the packagings out of reach of children and dispose
of them as soon as possible.
Guarantee
Warranty period of 12 months applies to commercial use and 24 months applies
to private use and commences on the day of purchase of the device. The
guarantee solely covers inadequacies caused by material defect or
manufacturing defect. Original payment voucher with the date of the sale needs
to be submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorized use such as appliance
overloading, use of violence, damage as a result of any unauthorized
interference or caused by foreign items. Failing to follow the operating and
assembly instructions and common wear are also not included in the guarantee.
Important information for the customer
Please note that returns within or outside the warranty period should always
be in the original packaging. This measure effectively avoids unnecessary
transport damage and any associated disputed ruling. Your equipment is
optimally protected only in the original box, and keeping it in that box will
ensure smooth processing.
Service
Do you have any technical questions? Any claim? Do you need any spare parts or
operating instructions? We will quickly help you and without needles
bureaucracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In order to identify your
device in case of claim we need the serial No., product No. and year of
production. All this data can be found on the type label.
- Tel.: +49 (0) 79 04 / 700-360
- Fax: +49 (0) 79 04 / 700-51999
- Email: support@ts.guede.com
Inspection and maintenance plan
Repairs and works specified in these Instructions may only be performed by
qualified authorized staff. Use only original accessories and original spare
parts.
Regular servicing period| Before any start-up| Once a
month| Every 3 months or after 50 operating hours in each case|
After 6 months
---|---|---|---|---
Crack in the housing?| Inspection| ü| | |
Everything mounted?| Inspection| ü| | |
EC-Declaration of Conformity
We, hereby declare the conception and construction of the below-mentioned
appliances correspond – at the type of construction being launched – to the
appropriate basic safety and hygienic requirements of EC Directives. In case
of any change to the appliance not discussed with us the Declaration expires.
GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail: info@guede.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>