4lite 4L3/1207/EM/MW LED Highbay with Microwave Sensor Instruction Manual
- June 9, 2024
- 4lite
Table of Contents
4L3/1207/EM/MW LED Highbay with Microwave Sensor
Instruction Manual
Warranty Information
For warranty details please contact your local representative or visit our
website: www.anselluk.com
It is highly recommended that all Ansell luminaires are installed / maintained
by a fully qualified electrician and wired in accordance to the latest IEC
standards or national equivalent.
Mains power must be switched off during any installation or maintenance.
Should the product fail during the warranty period, Ansell will repair or
replace the product in question.
Ansell do not accept any responsibility for any installation costs associated
to the replacement of this product.
“Please Note – The warranty period shall be null and void in the following
circumstances:
Failure by the installer, end user or any third party to exercise caution to
protect any covered product or part from outside damage, adverse temperature,
humidity conditions, fluctuations in the electrical system or physical abuse
as well as failure related to poor workmanship in the installation of the
products or parts. Inability to provide correct product information. Any
questions or concerns with the product, please contact your local
representative.”
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
The external flexible cable or cord of this luminaire cannot be replaced; if
the cord is damaged, the luminaire shall be destroyed.
AnseII Electrical Products Unit 6B, Stonecross Industrial Park,
Yew Tree Way,
Warrington,
WA3 3JD
Warrington Tel: +44 (0)1942 433333
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>