4lite Single 6ft LED Non Corrosive Batten 35W 3823lm 230V Instruction Manual
- June 5, 2024
- 4lite
Table of Contents
4lite Single 6ft LED Non Corrosive Batten 35W 3823lm 230V
Installation Instructions
For warranty details please contact your local representative or visit our website www.anselluk.com
- It is highly recommended that al Ansell luminaires are Instaled maintained by a fully quilted electrician and wired In accordance with the latest IEC standards or national equivalent
- Mains power must be switched off during any Installation or maintenance.
- Should the product tall during the waranty period, Ansell will repalr or replace the product In question.
- Ansell does not accept any responsibility for any Installation costs associated to the replacement of this product
- Please Note The waanty period shall be null and void In the following circumstances: Failure by the Installer, end-user or any third party to exercise caudon to protect any covered product or part from outside damage adverse temperature, humidity conditons, fluctuations In the electical system or physical abuse as well as failure related to poor workmanship In the installation of the products or parts. Inability to provide contact Product Infomation. Any questions or concems with the product, please contact your local representative.”
- The light source contained in this Luminaire shal only be replaced by the manufacturer or his service agent or a similar qualified person
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>