GE Fit Plus Smart Scale User Manual
- June 9, 2024
- GE
Table of Contents
GE Fit Plus Smart Scale
Precautions
Read carefully before use:
- Do not use the body fat scale if you have a pacemaker or any other internal medical device in your body. When you take a measurement, the scale passes a very low, harmless electrical current through your body. The current may cause your internal medical devices to malfunction.
- Do not use the scale on a wet surface. This could lead to slipping.
- Do not use a damaged charging cable or a faulty charger to charge your scale.
- Dispose of the scale properly following your local regulations.
- Do not jump on the scale. This scale has a weight limit of 396 lbs.
Scale Overview
GE Fit Plus Smart Body Fat Scale measures weight, BMI, body fat %, and other body compositions using bioelectrical impedance analysis (BIA) technology. This smart scale is intended for home use only.
Scale Layout
- CD HD LCD Display
- Electrodes
- Tempered Glass Surface
- Scale Feet
- Reset Button
- Charging Port
- LCD Display
- LCD Display
- Charging Indicator (Always on when the scale is charging and working)
- Bluetooth Connection
- Unit
- Weight Measurement
- Body Fat Percentage Measurement
- Muscle Mass Measurement
- BMI Measurement
- Body Water Measurement
- Bone Mass Measurement
- Data Change
- %
SPECIFICATION
- Model: Fit Plus
- Dimensions: 11· x 11″ x 1″ / 280 x 280 x 25 mm
- Weight: 2.9 lb/ 1.3 kg
- Weighing Range: 0.4 – 396 lb/ 0.2 – 180 kg
- Power: 200mAh polymer lithium battery
- Rated Input: 5V=200mA
Get Started
Download the app and create an account
- Download the app. Go to the App Store for iOS or Google Play Store for Android, and search for “Fit Profile”, or scan the QR code below.
- Sign up and complete your profile.
Setup your scale
- Charge your scale by using the enclosed USB-C cable with a power adapter {not included).
- Place the scale on a hard flat floor surface.
- Open the “Fit Profile” app and tum on the Bluetooth.
- Turn on the scale by briefly stepping on and off it.
Your scale will be paired with your smartphone automatically within seconds. If not
- Tap”+ Pair the Device”.
- Turn on the scale by briefly stepping on and off it. On the app, tap the smart scale icon, then select “Fit Plus” and click “Connect.”
Your scale has now been successfully paired with your smartphone and is ready to start taking your measurements.
Take measurements
- Open the “Fit Profile” app, and then keep the app open on the “Home” screen.
- Place the scale on a hard flat floor surface, do not place ii on carpet or any other soft surfaces.
- Turn on the scale by briefly stepping on and off it. Then, wait for the scale to set to 0.
- Step on the scale while barefoot till the numbers display on the scale. Your measurement results will also display on the app.
Recommendations
To have accurate, consistent, and comparable measurement results, please follow the recommendations below.
- DO’s
- Ensure the personal information in your profile is correct. Choose “Athlete Mode” if you work out intensively and regularly, or you are a muscular person.
- Place the scale on a hard flat floor surface when you weigh.
- Make sure the scale displays an 0 before stepping on to measure. While barefoot, stand still on the scale until the measurement is completed.
- Weigh yourself under similar conditions and around the same time every day.
- Empty your bladder before weighing.
- DONT’s
- Do not place the scale on a carpet or a soft surface when you weigh.
- Do not measure with socks or shoes on.
- Do not measure when your body is wet. For example. immediately after a shower. bath, sauna, or strenuous exercise.
- Do not measure after drinking a lot of water or alcohol.
- Do not measure if you have a cold or fever.
- This smart scale is intended for home use only.
- For people ages 18 years and above, it provides full body composition measurements.
- For children under 10, it only provides weight and BMI measurements.
- For children between the ages of 10 and 17, it provides full body composition measurements. (Please note that the body mass-related items like body fat%, etc., are only for your reference.)
- This smart scale is not intended for use by pregnant women.
Scale Display
Measurements/ Messages Displayed
Troubleshooting
| Symptom | Cause | Solution |
|---|---|---|
| Low power | Charge your scale by using the USB-C cable that came with the |
scale.
| Overload| There is too much weight on the scale.
Remove the weight on the scale to protect the scale sensors.
| ****
Unstable measurement
| Make sure the scale is placed on a flat, hard surface (not carpet). and you are standing still on the scale and distributing your weight
evenly.
| Standing on the scale for too long| ****
Step off from the scale.
| Unable to calibrate| Place the scale on a flat hard floor surface gently and then turn it on. Let the scale
calibrate.
No display| Auto-off, or no power| Auto-off: Normal condition. Turn on the scale (briefly step on then off)
No power: Charge the scale.
Display weight only| Unable to determine body composition| No user profile: Open the “Fit Profile” app when weighing.
Children under 10: Body composition not supported.
All others: Need to stand on the scale barefoot (no socks/shoes) to weigh.
Does not sync with the app| Lost connection| Reconnect the scale. On the app
tap the device icon located in the top-right-hand corner, and then tap “+Add
device”. Next, turn on the scale then tap the smart scale icon on the app
screen. Then, select “Fit Plus” and tap “Connect.”
---|---|---
Unable to turn on, or disfunction| Abnormal| Reset the scale. The reset button
is located next to the USB-C charging port. Insert a paper clip or small
screwdriver to reset the scale.
Warranty
This product is warranted by the manufacturer against defects in materials and workmanship for one (1) year from the original date of purchase. Proof of purchase is required. This warranty does not cover accidental damage, mistreatment, or unauthorized repair. Detailed warranty policy: www.fit- profile.com/warranty. If you have any issues or questions, please contact Global eFit Inc.
FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Compliance Statements
This device contains license-exempt transmitter(s)/receiver (s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
CONTACT
Global eFit Inc.
- 17304 Preston Road, Suite 800, Dallas, TX 75252, USA
- www.fit-profile.com
- [email protected]
- 1-866-786-5988
- (toll-free US & Canada; M-F 9:00am – 5:00pm Central Time)
Model of Independent Module Used in This Product: C21007C10
FCC ID: 2ANDX-GEX00
IC: 26148-GEX00
Manufacturer: Shenzhen Yolanda Technology Co., Ltd.
Room 201, Jinfulai Building, No.49-1, Dabao Road, Dalang Area, Xinan Street,
Baoan, Shenzhen, China
GE is a registered trademark of General Electric Company and this product is manufactured under license by GE.
Made in China