Kogan M5733946 Door Canopy User Guide

Kogan M5733946 Door Canopy User Guide

SAFETY & WARNINGS

Warning

• Please follow the instructions as listed in this manual.
• For safety purposes we strongly recommend that the product will beassembled by two people.
• We strongly recommend the use of work gloves duringassembly.
• Do not attempt to assemble the canopy in windy or wet conditions.
• Always wear shoes and safety goggles.
• Dispose of all plastic bags safely – keep themout of reachof small children.
• Keep children away from the assembly area.
• Do not attempt to assemble the canopy if you are tired, havetakendrugs,medication or alcohol, or if you are prone to dizzy spells.
• When using a stepladder or power tools, ensure that youfollowthemanufacturers safety advice.
• Ensure that there are no hidden pipes or cables in the wall beforedrilling.
• Please consult your local authorities if any permits are requiredtoerectcanopy

Note

• You are solely responsible for determining whether the handling, storage,assembly, installation or use of this product is safe andappropriateinanylocation or for any given application. This product is intendedfornormalresidential use only.
• Do not use this product for any application that is not recommendedinthese instructions or building codes in effect in locationwherethisproduct will be used. Always take care and use appropriatesafetyequipment (including eye protection) when assemblingor installingthisproduct.

COMPONENTS

1. Board (x1)

2. Frontal Fixing Bar (x1)

3. Bracket (x2)

4. Back Fixing Bar

5. Setscrew (x4)

6. Bolt (x4)

INSTALLATION

Step 1
Remove the protective film off the board (①)

Step 2
Attach the frontal fixing bar (②) and the back fixing bar (④) totheboard (①)

Step 3
Attach two brackets (③) to the assembled unit of step 2 with bolts (⑥). (It’s recommend to place the board vertically when mountingthebrackets.)

Step 4
Drill 4 holes on the positions as the picture shows. Make sure theholes you drill match the holes of the bracket. Use the setscrews (⑤) tofix the canopy to the desired location.

CLEANING &CARE

• Handle components with care due to sharp corners.
• When your canopy needs cleaning, use a mild detergent solutionandrinsewith cold clean water.
• Do not use acetone, abrasive cleaners or other special detergent tocleanthe panel.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>