aivituvin AIR 53 Rabbit Hutch Bunny House on Wheels Hamster Cage with Tray Instruction Manual
- June 9, 2024
- aivituvin
Table of Contents
aivituvin AIR 53 Rabbit Hutch Bunny House on Wheels Hamster Cage with Tray
Instruction Manual
NOTICE
Please retain these instructions for future reference.
- Firmly secure all bolts,screws and knobs before use.
- Reconfirm that all bolts,screws,and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- Be aware that moving parts can injure,crush and cut.
- If any parts are missing,broken,damaged,or worn,stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’ s instructions as this could void the product warranty.
TOOLS REQUIRED
- **PHILLIPS SCREWDRIVER
**
- **DRILL (RECOMMENDED)
**
- **2PERSON ASSEMBLY
**
- **APPROXIMATELY 30MIN. ASSEMBLY
**
HARDWARE
PARTS
PRODUCT ASSEMBLY
-
Attach side panel Part C & D and divider Part E to back panel Part B by 6xP1 screws.
-
Attach front panel Part A by 6xP1 screws
-
- Put in the wooden floor Part I as show on the picture.
-
Slide in the tray Part F.
-
Put in wooden board Part G & bottom wire netting Part H.
-
Screw ramp Part K to layer Part J by 4XP2. Then put it in the house.
-
Attach roof Part L by 6XP2 screws.
-
Attach roof hinge P3 by 4XP2 screws.
-
Attach casters Part M & N to the legs.
-
Attach lock P4 by 4XP2 screws.
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury,property damage or loss,whether direct,indirect,or incidental,resulting
from the incorrect attachment,improper use,inadequate miantenance,or neglect
of this product.