Laserliner HD 2000 LED Construction Spotlight Instruction Manual
- June 9, 2024
- Laserliner
Table of Contents
Laserliner HD 2000 LED Construction Spotlight
Completely read through the operating instructions as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.
General safety instructions
- The device must only be used in accordance with its intended purpose and within the scope of the specifications.
- Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.
- Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
- Do not point the beam of light directly into the eyes of people, particularly those wearing glasses or contact lenses (high dazzling effect) or animals.
- Under no circumstances should you look directly into the light produced by this device or when it is reflected off specular surfaces.
- Close your eyes and move your head away from the beam of light if optical radiation hits your eyes.
- Avoid heat build-up during use, for example, due to the covering the device.
- Do not place the lamp in front of inflammable material when in use. It could ignite.
- Do not use the lamp in traffic.
- Do not leave the lamp unsupervised with children.
- Before using the lamp for the first time, the battery must be fully charged.
- The red charging indicator lights up during charging.
- The green charging indicator lights up when charging is completed.
- Recharge frequently.
- Always replace the battery with an original 4K5 battery.
- Do not leave the battery without charge for an extended period. Deep discharge risks damaging the battery.
- The light source of this lamp is not replaceable; when the light source reaches its end of life the whole lamp shall be replaced.
Safety instructions
Danger – powerful magnetic fields
- Powerful magnetic fields can adversely affect persons with active medical implants (e.g. pacemaker) as well as electromechanical devices (e.g. magnetic cards, mechanical clocks, precision mechanics, hard disks).
- With regard to the effect of powerful magnetic fields on persons, the applicable national stipulations and regulations must be complied with such as BGV B11 §14 „electromagnetic fields“ (occupational health and safety – electromagnetic fields) in the Federal Republic of Germany.
- To avoid interference/disruption, always keep the implant or device a safe distance of at least 30 cm away from the magnet.
Safety instructions
Using artificial, optical emission (OStrV)
DIN EN 62471
Risk Group 1
CAUTION: Possibility of harmful optical radiation. Hazard for retina from
blue light between 400 and 780 nm. Do not look into the lamp for longer
periods during operation. Can be harmful to eyesight.
Power bank
- Built-in power bank with USB outlet to charge mobile devices Output: 5V, 1A, Capacity: 6000mAh
- The power bank will automatically shut down when battery voltage is below 6.3V. Lamp function will continue until battery is fully discharged.
Technical Data **
**
(Subject to technical changes without notice. 21W31)
Luminosity| 400 lm – 2000 lm
Duration| 2.5 hours – 15 hours
LED chip| COB LED
Protection class (lamp)| IP 67
Power supply| Li-Ion 7.2 V / 6 Ah
Charging time| 3 – 4 hours
Operating conditions| 0° … 40° C
Storage conditions| -10° … 60° C
Dimensions| 159 x 121 x 47 mm
Overall weight| 950 g (including battery pack)
EU directives and disposal
This device complies with all necessary standards for the free movement of
goods within the EU.
This product is an electric device and must be collected separately for
disposal
according to the European Directive on waste electrical and electronic
equipment.
Further safety and supplementary notices at:
www.4k5tools.com
For lithium-based primary and secondary batteries as well as other high performance batteries Only dispose of completely discharged batteries. If a battery is not completely discharged, precautions must be taken to prevent short circuiting its terminals, e.g. isolation of the terminals.
Notice about transporting products containing lithium batteries
The battery has been built and tested according to the current UN manual
38.3. Effective protection against over-pressure, short-circuit, forceful
breakage and reverse current are provided. Refer to the operating instructions
for battery data. If no specific safety info-mation is provided this means the
quantity of lithium and energy level are below the currently applicable
limits. In this case the battery, neither on its own nor installed in the
device, is subject to international hazardous materials regulations. The
transport of multiple batteries could be relevant for hazardous materials
regulations, please observe the special conditions (e.g. packaging).
Notice about disposal
Electrical devices, mechanical devices, batteries, accessories and packaging
should be recycled in an environmentally appropriate process to recover
valuable raw materials. Please contact your municipal authority for
information on corresponding disposal facilities and comply with the disposal
and safety information at the collection sites.
For EU countries
Do not put electric devices into household garbage. The European directive for
scrap electric and electronic devices dictates they must be collected
separately and sent to an environmentally appropriate recycling facility.
Electric devices are marked with an icon of a crossed-out garbage can.
Batteries must be removed from the device before its disposal, the batteries
must be disposed of separately.
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany Tel.: +49 2932 638-300, Fax: +49 2932
638-333 info@laserliner.com
Umarex GmbH & Co. KG Donnerfeld 2
59757 Arnsberg, Germany Tel.: +49 2932 638-300 Fax: +49 2932 638-333
www.4k5tools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>