Laserliner 082.218A VarioView Camera User Manual
- June 9, 2024
- Laserliner
Table of Contents
082.218A VarioView Camera
User Manual
082.218A VarioView Camera
Completely read through the operating instructions, the “Warranty and Additional Information” booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.
Function / Application
The VarioView Camera is a camera unit for connection to the base VideoFlex unit. When combined with the base unit, colour video images are sent to the LCD for inspecting highly inaccessible locations such as cavities, shafts, masonry or in vehicles.
General safety instructions
– The device must only be used in accordance with its intended purpose and
within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of
children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures or
significant vibration.
– The device must no longer be used if one or more of its functions fail or
the battery charge is weak.
– The camera head is not acid-resistant or fireproof.
– It is absolutely vital to ensure that the VarioView Camera does not come
into contact with chemicals, voltage, moving or hot objects. This can damage
the device and put its user at risk of serious injury.
– The VarioView Camera must not be used for medical examinations / examining
people.
– Please ensure compliance with the safety regulations set out by local and
national authorities with regard to the correct and proper use of the device.
– The unit is not suitable for taking measurements close to dangerous
voltages. Therefore always make sure that conductive parts are at zero
potential when carrying out measurements in the vicinity of electrical
systems. Safe isolation from the power supply and precautions to prevent
systems being switched on again must be ensured by implementing suitable
measures.
Safety instructions
Using artificial, optical emission (OStrV) LED outlet 
–
The device works with LEDs of risk group RG 0 (exempt, no risk) in accordance
with the latest versions of applicable standards relating to photobiological
safety (EN 62471:2008-09ff / IEC/TR 62471:2006-07ff).
– When used for the intended purpose and under reasonably foreseeable
conditions, the accessible radiation of the LEDs is safe for the human eye and
skin.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations
and limit values in accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply. Electronic
devices can potentially cause hazards or interference or be subject to hazards
or interference.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents.
Store the device in a clean and dry place. 
- Base unit connection
- Flexible cable
- manually adjustable camera head with high-power LED
1 Focal depth
The VarioView Camera delivers sharp images in a range between 3 and 7 cm from
the camera head. 
2 Connection for flexible cable
3 Camera head adjustment 
Technical data
Subject to technical alterations. 19W49
| Type of camera | CMOS image sensor |
|---|---|
| Camera head | ø 17 mm |
| Camera head protection class | water-resistant, IP 67 |
| Camera head LEDs | 1 |
| Camera resolution | 640 x 480 pixels |
| Field of vision (FOV) | 73° |
| Camera focus | F3 cm – F7 cm |
| Cable diameter | 9,5 mm |
| Length of flexible cable | 1.5 m |
| Minimum bending radius | 75 mm |
| Operating conditions | 0°C … 60°C, max. humidity 20 … 90% rH, no condensation, |
max. working altitude 4000 m above sea level
Storage conditions| -20°C … 80°C, max. humidity 80% rH
Weight| 430 g
Dimensions (W x H x D)| 1600 x 17,2 x 17,2 mm
EU directives and disposal
This device complies with all necessary standards for the free movement of
goods within the EU.
This product is an electric device and must be collected separately for
disposal according to the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=AJD
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
info@laserliner.com
Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333
www.laserliner.com
Rev19W49
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>