anslut 019921 LED Strip Instruction Manual
- June 4, 2024
- anslut
Table of Contents
anslut 019921 LED Strip
Important!
Read the user instructions carefully before use. Save them for future
reference. (Translation of the original instructions
SAFETY INSTRUCTIONS
Carefully read the instructions before use!
- Save these instructions for future reference.
- Check that all connections are properly made before switching on the product.
- If the product does not work, check that the circuit is supplied with voltage.
- Keep children at a safe distance from the product when it is in use.
- If the permitted maximum voltage is exceeded this can damage the product, or reduce its useful life.
- If the permitted maximum temperature is exceeded this can damage the product, or reduce its useful life.
TECHNICAL DATA
- Rated voltage, transformer in 230 V ~ 50 Hz
- Rated voltage, transformer out 12 VDC
- Output 1.3 W
- No. of LEDs 18
- Colour temperature 3500 K
- Luminous flux 120 lm
- LED strip, size 300 x 10.5 x 2.5 mm
- Operating temperature -20 to 40°C
- Storage temperature -20 to 45°C
USE
- Check that all connections are properly made before switching on the product.
- If the product does not work, check that the circuit is supplied with voltage.
- Make sure that the arrow on the contact (magnified in figure) is turned to the plus side (+) on the LED strip.
REMOVAL
- Plug in the black plug with 4 pins.
- Test the light source by connecting to 12 VDC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>