Baseus PowerCombo Pro 6 Ports Power Strip User Manual
- August 6, 2024
- Baseus
Table of Contents
Baseus PowerCombo Pro 6 Ports Power Strip User Manual
Product Introduction
This is a power strip with an extension cord that comes with 3 AC ports and 3 fast-charging DC ports. Built-in digital control circuit, active protection circuit, lightning protection circuit, plus the smart touch control, make the product easy to operate and quick to respond with longer service life, safe and reliable. In addition, the DC part uses a new type of semiconductor material (GaN) with a total output power of 40W. The product is mini and compact with a variety of output ports (including 3 AC outlets, 1 USB port, and 2 Type-C ports), and is multiple fast charging protocols certified, including QC4+, PD3.0, QC3.0, QC2.0, PPS, SCP, FCP, AFC, PE+, and more, simultaneously charging two Apple phones.
Schematic Display of Product
- AC Outlet L
- AC Outlet R
- AC Outlet T
- Type-C 1 Output
- Type-C 2 Output
- USB Output
- Touch switch and indicator light
Indicator Instructions
Stays on
Light loading mode: Output between OW and 650W
Breathing
Heavy loading mode: Output about between 650W to 1625W, indicator flashes at
0.5Hz
Quick flashing
Protection mode: Output over 1625W, automatically turns off, indicator flashes
at 1Hz
Product Specifications
- Name: Baseus Digital Control Power Strip
- Model No.: CCGAN40-3ACS
- Material: PC
- Rated voltage: 125V~
- Rated power: 1625W Max.
- Rated current: 13A Max.
- Type-C1/Type-C2 Output: 5V-3A; 9V-2.22A; 12V- 1.67A
- USB Output: 5V-3A; 9V-2A; 12V-1.5A
- Type-C1+Type-C2 Output: 20W+20W|
- Type-C1+USB Output: 20W+18W
- Type-C2+USB Output: 15W
- Type-C1+(Type-C2+USB) Output: 20W+15W|
- Type-C 20W: 5V- 3A; 9V-2.22A; 12V- 1.67A
- USB 18W: 5V- 3A; 9V-2A; 12V- 1.5A|
- 15W: 5V – 3A
- Power Cord Length: 1.5m (4.92ft)
- Product size: 109X46.5× 42mm (4.3X1.8X1.65in)
- Product weight: About 340g
Package Including
- Power Strip X1
- User Manual X1
- Warranty Card XI
Use Environment
- Use ambient temperatures: non-tropical areas, below 2000m altitude.
- Storage ambient temperatures: – 20 to 40 degrees Celsius.
Tips
Please read all instructions and warnings before using this product. Non-
standard use will damage the product or personal safety.
- The total power must not exceed the rated power of the product.
- Do not wind the power cord during use to avoid overheating.
- Do not store the product in high temperatures, strong light, and strong magnetic field. Do not place it in other harsh environments such as fire sources.
- Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- Consumers shall be liable for any personal and property damage resulting from their improper use of the user manual or ignoring the warning, to which our company will not bear any legal liability.
- Dismantling of this product by non-professionals is strictly prohibited.
- Avoid actions that could damage the device such as bashing, throwing, stepping on, etc.
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used by the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Warning
Please follow the above safety instructions, otherwise, it may cause fire,
electric shock, damage, or other injuries.
Supervising Company: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd0
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Hotline: +86-4000-712-711 Website: www.baseus.com
Manufacturer: Dongguan OPAQI Electronic Technology Co., Ltd.
Address: No.2 Of Xifu Road, HongYeBeiLu, LinCun, Tangxia Town
Dongguan, Guangdong
PB3624Z-P0A0
1000051560
Designed by Baseus
Made in China
Download PDF:Baseus PowerCombo Pro 6 Ports Power Strip User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>