Monsher LAUTREC 60 Noir Verre Built In Hood User Manual
- June 9, 2024
- Monsher
Table of Contents
- Introduction
- SAFETY PRECAUTIONS
- Mechanical control (buttons)
- TECHNICAL SPECIFICATIONS
- SECTION 2. MOUNTING AND DIMENSIONS
- SECTION 3. CLEANING AND MAINTENANCE
- SECTION 4. Troubleshooting
- SECTION 5. HELPFUL INFORMATION
- DETERMINATION OF THE PRODUCTION DATE BY SERIAL NUMBER
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Monsher LAUTREC 60 Noir Verre Built In Hood User Manual
Introduction
DEAR CUSTOMER ,
Thank you for purchasing our equipment!
We are sure that appliances of the MONSHER brand, which are modern, functional
and made of high quality materials and components, will be a reliable
assistant in your kitchen.
Please read this manual carefully before starting any installation work.
It will help you avoid premature failure, as well as extend the life of your
appliance to the maximum possible.
Please note that the installation of this appliance must be carried out by a
qualified technician and in accordance with these instructions.
The manufacturer is not liable for any consequences of failure to observe this
condition.
Caution!
The manufacturer is not responsible for any possible errors or misprints in
this manual.
The manufacturer reserves the right to make any changes, without prior notice,
to design, outside appearance and scope of supply of appliance, which will be
considered as necessary and useful according to the manufacturer’s point of
view.
Possible modifications will not affect the basic properties, including those
that relate to safe operation of the appliance. Section 1.
SAFETY PRECAUTIONS
-
Assembling and electrical connection of the appliance must be carried out by skilled technicians of authorized service center.
-
The appliance is designed to operate on 220-240 V AC. Make sure that the technical parameters of your home power supply system correspond to the data for the power supply.
If parameter values are above or below the specified range, the use of the appliance is prohibited. -
Do not connect the kitchen air cleaner to the ventilation channels that are used to remove smoke and fumes from the equipment operating on any other energy sources except electric one.
-
The appliance is to be connected only to an earthed power supply system.
-
Do not cook flammable foods below the kitchen air cleaner.
-
Use aluminum filter that comes with the appliance.
The use of other materials is prohibited! -
Do not connect the appliance to the power supply system, until the assembly and installation of the appliance is completed.
-
Do not use the appliance without the aluminum filter in place.
-
Do not touch the lamps.
-
Do not remove the aluminum filter while the appliance is in operation.
-
Do not disconnect the appliance from the power supply system directly.
If necessary, turn the appliance off using the control panel and, only after that, unplug it from the power supply system.
When switching on: first connect the appliance to the power supply system, then switch it on using the control panel, but not vice versa! -
The appliance requires regular cleaning and maintenance work.
-
When installing the appliance, observe the required distance between it and the cooking surface of your stove:
- for an electric stove: at least 65 cm
- for a gas or gas-electric stove: at least 70 cm
-
Do not allow children to play with packaging materials, it can be dangerous!
-
The appliance is allowed to be turned on only once the pots and/or pans are placed on the stove.
-
For best air cleaning in your kitchen, do not turn off the appliance immediately after the cooking process is completed: let the appliance run for a further 15 minutes.
For this purpose you can also use the timer function (the button «Auto Switch Off Timer» on the control panel). -
Ensure adequate ventilation in the kitchen, if a gas stove is operated simultaneously with the appliance.
-
In case of any malfunctions, contact your nearest authorized service center.
-
If the kitchen hood is supposed to operate in air discharge mode, then during installation it is important to provide a duct of the corresponding diameter.
To prevent loss of performance caused by aerodynamic resistance of the duct, the air duct must not be too long, or curved.
Never restrict the duct size, or make sharp bends.
In addition, it is preferable to use smooth PVC duct (round or flat), rather than the flexible corrugated one because bends of a corrugated duct increase the noise level of the hood. -
The manufacturer does not bear any responsibility for any possible damage, in case of non-compliance with above precautions.
Mechanical control (buttons)
-
I speed (low speed) – press the switch to position “I”
-
II speed (average speed) – press the switch “TURBO” to position “II”
-
III speed (high speed) – press the switch “TURBO” to position “I”(on the speed I and II switch “TURBO” should remain in the position 0) 0 – fan is off).
The key switch with the symbol of the light bulb, intended to turn on the lamp at insufficient illumination of the working area of the cooker, is located on the left side of body of the cooker hood. -
0 – light is off;
-
I – light is on when the panel pulled- out;
-
II – light is on independently of the position of the pull-out panel with the filter.
TECHNICAL SPECIFICATIONS
LAUTREC50 Noir/Blanc, LAUTREC 60 Noir/Blanc/ Acier
LAUTREC 60 Noir Verre
- Width: 500/600 mm
- Control: Push Button/Touch Motor : 110W
- Suction Power: 550 m3 Light bulbs: Led (1*2w)
- Diameter of the air discharge pipe: 120 mm
- Material: Painted Body Voltage: 220-240 V / 50 Hz
- Modes of operation: Air discharge / Recirculation
- Filter: 3 Layer Al. Filter /
- Optional Carbon Filter KF-I/KF-Y (optional)
SECTION 2. MOUNTING AND DIMENSIONS
LAUTREC 60 Noir/Blanc/ Acier
LAUTREC 60 Noir Verre
LAUTREC 50 Noir/Blanc
Electrical Hob Gas Hob
Please unpack and inspect the appliance! Before starting installation, make
sure that the hood has no obvious transport damages.
If such defects are detected, do not install or connect the appliance to the
mains.
SECTION 3. CLEANING AND MAINTENANCE
Caution: Before you start cleaning the appliance, disconnect it from the power supply.
Aluminum filter
Aluminum filter is designed to trap grease particles out of the flow of air
running through it.
For this reason, the filter needs regular cleaning.
The cleaning interval depends on the frequency of use of the air cleaner.
Generally, it is recommended to clean it once a month.
To do this, remove the filters, wash them in water with a neutral liquid
detergent, dry them, then set them back in the air cleaner.
Over time, filters may change color due to a regular washing.
This is a natural process, which does not indicate a defect, so filter
replacement is not required.
The aluminum filters can be washed in the dishwasher.
How to remove aluminum filters
- Press on the latch of the filter lock.
- Pulling down a bit, remove the filter.
In order to put the filters in place after cleaning, follow the above instructions in reverse order.
Carbon filter (used in recirculated air mode)
Carbon filter is designed to trap odors and fumes while cooking.
It is used in cases where there is no possibility to connect the air cleaner
to a special ventilation duct for discharging air outward.
When operating the appliance with a carbon filter, contaminated air is sucked
into the appliance and passes through a carbon filter, and then clean air is
supplied to the kitchen.
The carbon filter should be replaced at regular intervals.
The interval of filter replacement depends on the frequency of use of the air
cleaner, style of cooking and frequency of the aluminum filter cleaning.
Generally, it is recommended to replace the carbon filter once every 4 months.
How to remove carbon filter:
- Remove aluminum filters.
- Turn the carbon filter to the left and pull it.
- Replace the old carbon filter with the new one.
- Put the filter back into place.
If necessary, clean the outside of the air cleaner with a soft, damp cloth.
Do not use any abrasive cleaning agents.
For painted stainless steel surfaces: to avoid scratching it is recommended to
wipe them with a soft, damp cloth in the painting direction.
Do not remove the lamp cover during the surface cleaning process.
Caution! Do not use the steam generators for cleaning.
Caution! Not following the above rules for cleaning the appliance and
replacing filters may cause fire.
Caution! If you need to transport the air cleaner, first of all,
disconnect it from the power supply and proceed with disassembly.
It is recommended that you transport it in the original packaging.
If this packaging is not available, package the appliance using materials that
prevent possible damage resulting from transportation.
SECTION 4. Troubleshooting
Very often a malfunction of the appliance occur for minor reasons.
So, before you call for service center, please check whether you can
troubleshoot yourself.
For this purpose please check the following possible causes of malfunctions.
Malfunction | Possible cause | Troubleshooting action |
---|---|---|
The appliance does not operate | **Faulty fuse |
** Plug is not properly inserted into the outlet
There is no voltage in the power supply system|
- Check the fuse of the appliance
- Make sure that plug is properly inserted into the outlet
Suction power is not sufficient| Incorrect speed selected Filters are clogged|
- Increase suction speed of hood
- Clean or replace filters
The lamp is not lighting| Faulty fuse
The lamp is burned out or incorrectly installed|
- Check the fuse of the appliance
- Make sure that the lamp is installed correctly or replace it
Please note!
The following shall not be considered as defects of the Product
Cooker hoods| Minor technical smells coming from a new product during the
initial operation period
---|---
Violation of the operating conditions of the components of the product, made
of natural wood
Sound of the air flow passing through the ventilation ducts and channels of
the product
Discoloration of housing elements of the product when using the product
Black discoloration and deformation of fat filter elements when using the
product
SECTION 5. HELPFUL INFORMATION
Physical characteristics of the sound volume (the sound pressure level) is
measured in decibels (dB). «Noise» is a chaotic mix of sound.
The human ear can detect sounds with sound volume of 10-15 dB and above.
When choosing a kitchen hood, it is necessary to pay special attention to
technical indicators such as the noise level.
This indicator is very important, because, and that’s beyond a shadow of a
doubt, each of us spends a lot of time on the kitchen.
It is especially common for women who love to please their loved ones with
delicious cooked dishes.
According to the surveys, 40% of women do not use kitchen hoods for their
intended purpose (it refers to the process of air suction), precisely because
they are annoyed with the noise level.
Consequently, such a necessary and needed in the kitchen appliance, kitchen
air cleaner, designed to remove airborne odors, grease, soot and smoke,
becomes almost meaningless.
In comparison with many other manufacturers of kitchen hoods, MONSHER hoods
are comfortably quiet.
Even at maximum suction power of 1000 m3, noise level reaches only 42 dB.
This allows you to make the cooking process the most comfortable and helpful.
For more complete understanding of the scale of decibels, you can compare
parameters of the following guidelines:
Intensity of typical noise sources
Approximate sound pressure level dB| Characteristics| Sound source and
distance
160| Shock, trauma| Shot of a gun of 0.303 caliber close to your ear
150| Contusion, trauma| Rise of the lunar rocket, 100 m
140| Contusion| Rise of the jet plane, 25 m
120| Almost unbearable| Engine room of submarine Jackhammer, 1 m
---|---|---
100| Extremely noisy| Very noisy factory Subway car (intermittently)
90| Very noisy| Heavy diesel truck, 7 m Road drill (without muffler), 7 m
Railway freight wagon, 7 m
80| Very noisy| Ringing alarm clock, 1 m Motorcycle with a silencer, 1 m
75| Noisy| Inside railway carriage Shout, 1 m
Loud laughter, 1 m
70| Noisy| Inside a small car, moving at a speed of 50 km/h Home vacuum
cleaner, 3 m
Loud conversation, 1 m
65| Clearly audible| Typewriter Normal conversation, 1 m
40| Quite audible| Institution, where there are no special sources of noise
35| Hardly audible| Room of a quiet apartment Very muffled conversation
25| Quiet| Rural areas located far from roads Whisper of a person, 1 m
Recommendations of the manufacturer:
-
Check the correctness of the warranty card when purchasing the appliance.
-
Follow the instructions of the manual when operating the appliance.
-
Use only authorized service centers.
-
After carrying out any repairs by an authorized service center, the specialists of the center should provide you with a description of the work conducted.
This information may be useful for you in the future. -
The lifetime of the product: 10 years.
DETERMINATION OF THE PRODUCTION DATE BY SERIAL NUMBER
Manufacturers:
M&G HAUSGERATE GMBH
Potsdamer Str. 92 10785 Berlin
Tel: (030) 544 37 834
Fax: (030) 544 37 856
Factories-branches of the manufacturer:
ISITSAN SAC VE METAL BORU ISITMA SİSTEMLERİ SANAYİ VE TİCARET ANONİM
ŞIRKETİ10023 Sokak No:13 Tekeli Köyü Menderes / İzmir / Türkiye
Importers:
LLC «MG Rusland»,
141400, Moscow region, Khimki, Butakovo, 4
Ciarko Spółka z ograniczoną odpowiedzialnością Sp. K.
38-500 Sanok,ul.Okulickiego 10, Polska
The manufacturer reserves the right to make any changes to design, outside appearance and scope of supply of appliance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>