rabalux 7246 Smart Life App Instruction Manual
- June 9, 2024
- RABALUX
Table of Contents
rabalux 7246 Smart Life App
HOW TO USE THE “SMART LIFE” APPLICATION
How to download the “Smart Life” application: Search for the “Smart Life” application in the Google Play store or in App Store and scan the QR code on the package with your smart device. Open the application, if you are a new user, click on “Register”, if you already have an account, click on “login with existing account”. Enter your e-mail address, to which a security code will be sent. Enter the security code, then set up a password consisting of 6-20 characters.
How to connect the lamp to a smart device
Open the application and click on “+” in the upper right corner. Push on “Add
Device” Select Lighting on the left, and after that select Ceiling lamp WiFi
in case of Ceiling lamps or Lightsource WiFi in case of Light sources. Connect
with your smart device to the Wi-Fi network you wish to use. The Wi-Fi
connection may request the password of your Wi-Fi network during the
configuration. The Wi-Fi connection must be 2,4 GHz. Some routers have a limit
for how many smart items can be controlled through them, this limit is usually
8 pcs. Please turn on Bluetooth and GPS, this might only be required for the
pairing. Switch on the lamp. RESET the lamp by switching 3xon off the lamp
until it starts blinking, then the lamp is ready for pairing. When the lamp is
blinking, select in the application “Confirm the indicator blinks or
breathes”. Please select if it blinks quickly or slowly. The pairing will be
started and you will be able to use the lamp with your smart device after it
has been completed.
How to control the luminaire with the application
- Dimmer button: luminous flux and color temperature setting
- Scene button: selection of lighting mode settings Schedule: timing of luminaire lighting
How to share the luminaire
Editing>Share Device>Add sharing. Enter the phone number of another smartphone
or the e-mail address of another user registered in the application you wish
to share the control of the luminaire. RESET the lamp by switching 3xon off
the lamp until it starts blinking, then the lamp is ready for pairing. Remove
Device: In the application inside the lamps menu select Edit in the upper
right, and after that choose Remove Device at the bottom. The TUYA trademark
and application are not the property of Rábalux. The TUYA application was not
developed by Rábalux and is not operated by Rábalux, thus, questions related
to the download, installation and use of the application are governed by the
current terms of use of the application.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>