Mircom MIX-5251AP/RAP/HAP Advanced Protocol Intelligent Thermal Sensors Owner’s Manual
- June 9, 2024
- Mircom
Table of Contents
Mircom MIX-5251AP/RAP/HAP Advanced Protocol Intelligent Thermal Sensors
Description
Mircom’s low profile intelligent plug-in thernal detectors with integral
communications provide features that surpass conventional detectors. Point ID
capability allows each detector’s address to be set with decade address
switches, providing exact detector locations. These intelligent sensors
utilize a state-of-the-art thermistor sensing circuit for fast response and
are designed to provide open area protection with 50 foot spacing capability.
Mircom’s Advanced Protocol (AP) devices use a high speed communication
protocol that greatly increases the speed of communication between the
intelligent devices. Mircom’s Advanced Protocol uses a superior group polling
method as well as an interrupt feature that provide for a faster response to
an alarm condition. In addition, the Advanced Protocol allows for greater
system capacity with support for up to 318 devices per SLC circuit. The AP
devices are backwards compatible to operate in CLIP mode for legacy system
applications.
MIX-5251AP Intelligent Heat Detector, 135°F Fixed Temperature
The MIX-5251AP uses an innovative thermistor sensing circuit to produce 135°F
fixed temperature detection in a low profile package. This thermal detector
provides cost effective, intelligent property protection in a variety of
applications.
Features
- Sleek, low profile design
- Available as 135°F fixed temperature, 135°F fixed temperature with rate-of-rise detection and high temperature 190°F fixed temperature
- Dual LEDs indicate communications and activate steady when in alarm
- Low profile base provides easy interchangeability
- Low standby current
- Rotary switches for direct-dial entry of address. Each unit can have address set for 01-159 for Advanced Protocol mode and 01-99 for CLIP mode
- Superior EMI protection
MIX-5251RAP Intelligent Heat Detector, 135°F fixed temperature with Rate-
of-Rise Detection
The MIX-5251RAP provides both 135°F fixed and rate-of-rise thermal detection.
This thermal detector provides cost effective, intelligent property protection
in a variety of applications.
MIX-5251HAP Intelligent High Temperature Heat Detector, 190°F Fixed
Temperature
The MIX-5251HAP provides 190°F (88°C) fixed temperature detection for high
temperature applications.
Specifications
Voltage Range
15 – 32 volts DC peak
Standby Current
300 uA @ 24 VDC (one communication every 5 sec. with LED enabled)
LED Current (max.)
6.5 mA @ 24 VDC (on)
Height
2.0 inches (51 mm)
Diameter
6.1 inches (155 mm) installed in B210LP Base
4.1 inches (104 mm) installed in B501 Base
Shipping Weight
4.8 oz. (137 g)
Operating Humidity Range
10% – 93% noncondensing
Thermal Ratings
Fixed Temperature Setpoint: 135°F (57°C) Rate of Rise Detection: 15°F/min.
(8.3°C/min.) High Temperature: 190°F (88°C)
Operating Temperature Range
MIX-5251AP/MIX-5251RAP: -4°F to 100°F (-20°C to 38°C) MIX-5251HAP: -4°F to
150°F (-20°C to 66°C)
Ordering Information
| Model | Description |
|---|
Intelligent Heat Sensors
MIX-5251AP| Intelligent Heat Detector, 135°F Fixed Temperature
MIX-5251RAP| Intelligent Heat Detector, 135°F Fixed Temperature with Rate-of-
Rise Detection
MIX-5251HAP| Intelligent High Temperature Heat Detector, 190°F Fixed
Temperature
Bases
B501| Intelligent Flangeless Mounting Base
B210LP| Intelligent Flanged Mounting Base
B224RB| Intelligent Relay Base
B224BI| Intelligent Isolator Base
B200SR| Intelligent Standard Sounder Base (Compatible wih B501BH Series)
Accessories
RA-100Z| Remote LED Annunciator
Add suffix “A” for ULC listed model.
Canada
25 Interchange Way Vaughan, Ontario L4K 5W3
Telephone: 905-660-4655 Fax:
905-660-4113
www.mircom.com
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: 888-660-4655 Fax Toll Free:
888-660-4113
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE
THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance,
installation, testing and certification, refer to technical literature. This
document contains intellectual property of Mircom. The information is subject
to change by Mircom without notice. Mircom does not represent or warrant
correctness or completeness.