kogan OVTARMCHGA Tucson Armchair User Guide
- June 9, 2024
- Kogan
Table of Contents
kogan OVTARMCHGA Tucson Armchair
COMPONENTS
ASSEMBLY
Step 1
Attach the backrest to the rear seat base using x2 screws (D), x2 spring
washers (E) & x2 flat washers (F).
Step 2
- Attach the leg (C) to the chair assembly using x2 screws (D), x2 spring washers (E) & x2 flat washers (F).
- Insert x2 screw caps (G) in the location shown.
- Repeat the steps for the remaining leg.
Step 3
- Insert x2 dowels (I) into the front support (J) in the locations shown below.
- Attach the front support to the chair assembly using x2 screws (D), x2 spring washers (E) & x2 flat washers (F).
- Insert x2 screw caps (G) in the location shown.
Step 4
- Attach the front support to the chair assembly using x2 screws (D), x2 spring washers (E) & x2 flat washers (F).
- Insert x2 screw caps (G) in the location shown.
Need more information?
We hope that this user guide has given you the assistance needed for a
simple set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online
tohelp.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>