Delta Shower Door Measurement User Manual
- June 9, 2024
- Delta
Table of Contents
Delta Shower Door Measurement
Door Measurement Guide
Choosing the right Shower Door is as easy as 1-2-3. But before you customize your dream door, you need to make sure you have the correct measurements.
-
Identify Vertical and Horizontal Openings
Height (A) and Widths (B). Widths (B) measurements are often not the same so doors can be adjusted up to 3/8″. -
Vertical Opening
Measure from the top of the tub apron or the top of the threshold up to the top of the acrylic (or tile) surrounding wall. -
Horizontal Opening
Measure the width of the opening at the top and the bottom of the enclosure. -
Sill Width
Measure the depth of the sill for installation. Each track style has different sill depth requirements:
Traditional: 2″ Contemporary: 2-7/8″
MOD 6mm: 2-3/4″ MOD 10mm: 3″ -
Pivot
- Fits doors with opening minimum/maximum of 27 in. to 30 in. (69 cm to 76 cm), with 64-3/4 in. (164 cm) of height.
- Needs clearance of 6+ inches above the top plate.
-
Traditional
- The shower Door has two options. One with an opening minimum/maximum of 50-1/8 in. to 59-3/8 in. (127 cm to 151 cm) , with a 70 in. (178 cm) height. The second with a minimum 43-3/8 in. to a maximum 47-3/8 in. (110 cm to 120 cm) opening, with a 70 in. (178 cm) height, walk-in width of 15-27/32 in. to 19-27/32 in. (40 cm to 50 cm).
- Bathtub Doors fit with an opening minimum/maximum of 50-1/8 in. to 59-3/8 in.(127 cm to 151 cm), with a 58-1/8 in. (148 cm) height.
- Needs clearance of +2 inches above the final track height.
-
Contemporary Tub:
-
Shower Doors fit with an opening minimum/maximum of 50-1/8 in. to 59-1/2 in.
(127 cm to 149 cm) , with a 71 in. (180 cm) height. -
Bathtub Doors fit doors with an opening minimum/maximum of 50-1/8 in. to 58-1/2 in. (127 cm to 149 cm), with 58-3/4 in. (149 cm) of height.
-
Needs clearance of +(3/4) inches above the final roller height.
-
-
Mod Tub
- Shower doors fit with a minimum opening of 50-1/8 in. to a maximum of 58-1/2 in. and a height of 71-1/2 in .
- Bathtub door fit doors with a minimum opening of 50-1/8 in. to a maximum of 58-1/2 in. and a height of 59-1/4 in.
- Needs clearance of +2 3/4 inches above the final track height.
RECORD DIMENSIONS BELOW
Need Additional Assistance with Delta Shower Doors?
Call us at 1.800.964.4850
Visit us at www.deltashowerdoors.com
Email us at customersolutions@deltashowerdoors.com
**Disclaimers
- For ceramic tile application, use the top of the tile for the maximum door height.
- In older homes the opening at the top is often wider
- For ceramic tile application, use the top of the tile for the maximum door height.
- In older homes the opening at the top is often wider
NOTE: All Delta Shower Doors are designed to accommodate out-of-plumb conditions totaling 3/8”.
Download PDF: Delta Shower Door Measurement User Manual