ASRock IMB-1714 Jumpers and Headers User Guide

ASRock IMB-1714 Jumpers and Headers

Jumpers and Headers Setting Guide

IMB-1714
IMB-X1714
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Revision History

COM Port Pin9 PWR Setting Jumpers

• 1 : PWR_COM1 (For COM Port1)
  PWR_COM2 (For COM Port2)

• 25 : PWR_COM3 (For COM Port3)

  • PWR_COM4 (For COM Port4)
  • PWR_COM5 (For COM Port5)
  • PWR_COM6 (For COM Port6)
  • 1- 2 : +5V
  • 2- 3 : +12V

• 2:  PS/2 Keyboard/Mouse Header LAN LED Headers

• 3 : I225_LED3 (For LAN3 Port)

• 38 : I225_LED2 (For LAN2 Port)
  I225_LED1 (For LAN1 Port)PIN| Signal Name| PIN| Signal Name| PIN| Signal Name| PIN| Signal Name
  ---|---|---|---|---|---|---|---
  1| LILEDP| 2| LEDLNK# ACT| 3| LED_1000#| 4| LED_2500#

• 4 : ATX 12V Power Connector
  Chassis FAN Connectors (+12V)

• 5 : CHA_FAN1 GND

• 22 : CHA_FAN2

• 14 : CHA_FAN3

• 6 : CPU FAN Connector (+12V)

• 7 : USB 2.0 Port (USB2_13)

• 8 : PSU_SMB1

• 9 : 24-pin ATX Power Input Connector
  Chassis Intrusion Headers

• 10 : CI1 :
  Open : Normal
  Short : Active Case Open

• 13 : CI2 :
  Open : Active Case
  Open Short : Normal

• 11 : USB 2.0 Port (USB2_12)

• 12 : PWR LOSS Jumper (PWR_LOSS1)
  Open : No Power Loss
  Short : Power Loss

• 15 : USB 3.2 Gen1 Header (USB3_5_6) SATA3 Connectors

• 17 : SATA3_4, SATA3_5 18 : SATA3_6, SATA3_7 23 : SATA3_0~3

• 19 : System Panel Header

• 24 : COM Port Headers (COM3~6) (RS232)

• 26 : ATX/AT Mode Jumper (SIO_AT1)
  Open : ATX Mode
  Short : AT Mode

• 27 : ESPI Header

• 28 : Printer Port / GPIO Header (LPT_GPIO1)
  Printer Port: GPIO:PIN| Signal Name| PIN| Signal Name
  ---|---|---|---
  26| NC| 25| NA
  24| GND| 23| SIO_G70/GPP_E6
  22| GND| 21| SIO_G71/GPP_E5
  20| GND| 19| SIO_G72/GPP_I10
  18| GND| 17| SIO_GP87/GPP_H23
  16| GND| 15| SIO_GP86
  14| GND| 13| SIO_GP85
  12| JGPIOPWR| 11| SIO_GP84
  10| JGPIOPWR| 9| SIO_GP83
  8| SIO_GP73| 7| SIO_GP82
  6| SIO_GP74| 5| SIO_GP81
  4| SIO_GP75| 3| SIO_GP80
  2| SIO_GP76| 1| SIO_GP77

• If you want to use the printer port function, please short pin4 and pin5 on Digital Input / Output Power Select (JGPIO_PWR1).

  • 29 : Digital Input / Output Default Value Setting (JGPIO_SET1)
    1- 2 : Pull-High
    2- 3 : Pull-Low

  • 30 : Digital Input / Output Power Select (JGPIOPWR) (JGPIO_PWR1)
    1- 2 : +12V
    2- 3 : +5V
    3- 4 : +5V
    4- 5 : GND* If you want to use the printer port function, please short pin4 and pin5 on Digital Input / Output Power Select (JGPIO_PWR1).

  • 31 : USB 2.0 Header
    (USB2_10_11)

  • 32 : SPDIF Header

  • 33 : Front Panel Audio Header

  • 34 : Buzzer (BUZZ2)

  • 35 : Clear CMOS Headers
    CLRMOS2
    Open : Normal
    Short : Auto Clear CMOS (Power Off) CLRMOS1
    1- 2 : Normal
    2- 3 : Clear CMOS

  • 36 : PWR_BAT1

  • 37 : MCU_CON1

  • 39 : DACC1
    Open : No ACC
    Short : ACC * Auto clear CMOS when system boot improperly.

  • 41 : 5-pin Thunderbolt AIC Connector (TB1)
    PIN| Signal Name| PIN| Signal Name| PIN| Signal Name| PIN| Signal Name| PIN| Signal Name
    ---|---|---|---|---|---|---|---|---|---
    5| GND| 4| TBT_SLP_S5_S4#| 3| SLP_S3#| 2| TBCIO_PLUG_EVENT_R2| 1| TB_FRC_PWR

  • 42 : PCIe Power Connector

  • 43 : Audio Jacks
    Blue – Line In
    Green – Line
    Out Pink – Mic In

  • 44 : Top : RJ45 LAN Port (LAN1) (Supports POE)
    Bottom : USB 3.2 Gen2 Ports (USB3_3_4)

  • 45 : Top : RJ45 LAN Port (LAN2) (Supports vPRO)
    Middle : USB 3.2 Gen2 Port (USB3_9)
    Bottom : USB 3.2 Gen2x2 Type-C Port (TC_U7_8)

  • 46 : Top : COM Port (COM2) (RS232/422/485)*
    Bottom : D-Sub Port (VGA1)

  • 47 : Top : COM Port (COM1) (RS232/422/485)*
    Bottom Right : DisplayPort (DP1)
    Bottom Left : HDMI Port (HDMI1)

  • 48 : Top : RJ45 LAN Port (LAN3)
    Bottom : USB 3.2 Gen2 Ports (USB3_1_2)

• This motherboard supports RS232/422/485 on COM1, 2 ports. Please refer to below table for the pin definition. In addition, COM1, 2 ports (RS232/422/485) can be adjusted in BIOS setup utility > Advanced Screen > Super IO Configuration. You may refer to our user manual for details.

COM1, 2 Port Pin Definition

Installation of ROM Socket

• Do not apply force to the actuator cover after ic inserted.
• Do not apply force to actuator cover when it is opening over 120 degree, Otherwise, the actuator cover may be broken.

• The yellow dot (Pin1) on the ROM must be installed at pin1 position of the socket (white arrow area).
• Make sure the white dot on the ROM is installed outwards of the socket.
• For further details of how to install ROM, please refer to ASRI website.
  Warning: If the installation does not follow as the picture, then it may cause severe damage to chipset & MB.

M.2 Sockets Pin Definition

• 16 : M.2 Key-M Socket (M2_M1)
• 20 : M.2 Key-B Socket (M2_B1)
• 21 : M.2 Key-M Socket (M2_M2) (For IMB-X1714 Only)
• 40 : M.2 Key-E Socket (M2_E1)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>