Anolis ARCPAR 150 Oudtoor Flood and Spot Lighting Instruction Manual

June 9, 2024
ANOLiS

Anolis logo ARCPAR 150 Oudtoor Flood and Spot Lighting
Instruction Manual

ARCPAR 150 Oudtoor Flood and Spot Lighting

Anolis ARCPAR 150 Oudtoor Flood and Spot Lighting - QR
coteQR code for Installations Instructions
https://www.anolislighting.com/resource/arcpar-150-outdoor-installation- instructions

Fixture must be installed by a qualified electrican in accordance with all national and local electrical and construction codes and regulations. This device falls under class one and must be grounded!
STEP 1A

LUMINAIRE INSTALLATION USING YOKE

Anolis ARCPAR 150 Oudtoor Flood and Spot Lighting - fig
1Drill holes to the mounting surface according to brackets spacing.
Use fasteners that are appropriate for use with your mounting surface. Anolis ARCPAR 150 Oudtoor Flood and Spot Lighting - fig
2Secure holder by screws and tight them properly.Anolis ARCPAR 150 Oudtoor Flood and Spot Lighting - fig
3For securing the Luminaire fixture to the surface, install a safety wire which can hold at least 10 times the weight of the Luminaire.
STEP 1B

LUMINAIRE INSTALLATION USING CLAMP

Anolis ARCPAR 150 Oudtoor Flood and Spot Lighting - fig
4Fasten the luminaire with one M10x30 screw, washer and nut intoto the clamp. Anolis ARCPAR 150 Oudtoor Flood and Spot
Lighting - fig 5For securing the Luminaire fixture to the construction, install a safety wire which can hold at least 10 times the weight of the Luminaire.
STEP 2
LUMINAIRE INSTALLATION USING CLAMPAnolis ARCPAR 150 Oudtoor Flood and
Spot Lighting - fig 6 Loosen slightly the locking screw on each side. Anolis ARCPAR 150 Oudtoor Flood and Spot
Lighting - fig 7Set up the angle of the fixture to desired position and tighten the locking screws on each side.
STEP 3A

ACCESSORIES INSTALLATION (TOP HAT, HALF TOP HAT)Anolis ARCPAR 150
Oudtoor Flood and Spot Lighting - fig 8 Unscrew the countersun screw.
Pull the retaining clip right and up according to arrows on sketch upward.Anolis ARCPAR 150 Oudtoor Flood and Spot Lighting - fig
9Slip the hat into the first groove (closer to the luminaire).Anolis ARCPAR 150 Oudtoor Flood and Spot Lighting - fig
10Put the retaining clip into the prime position and secure it with the M3x8 countersun screw.
STEP 3B

ACCESSORIES INSTALLATION (BARNDOOR)

Anolis ARCPAR 150 Oudtoor Flood and Spot Lighting - fig
11Anolis ARCPAR 150 Oudtoor Flood and Spot
Lighting - fig 12Pull the retaining clip right and up according to arrows on sketch upward.Anolis ARCPAR 150 Oudtoor
Flood and Spot Lighting - fig 13Slip the barndoor into the second groove (further from the luminaire).Anolis ARCPAR 150 Oudtoor Flood and Spot Lighting - fig
14Move the fuse back to the original position.

Anolis logoROBE lighting s. r. o.
Palackeho 416
757 01 Valasske Mezirici
Czech Republic
Tel.: +420 571 751 500
E-mail: info@anolis.eu
www.anolislighting.com
VERSION 2.0 / 2_2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals