Anolis ArcSource Submersible II Submersible Fixture LED Light Instruction Manual
- June 9, 2024
- ANOLiS
Table of Contents
Anolis ArcSource Submersible II Submersible Fixture LED Light
INSTALLATION INSTRUCTIONS
ARCSOURCE SUBMERSIBLE II
Fixture must be installed by a qualified electrican in accordance with all national and local electrical and construction codes and regulations. This device falls under class one and must be grounded! The unit is intended only for permanent underwater installation up to depth of 10 m.
STEP 1.A
INSTALLATION WITH STANDARD MOUNTING BRACKETS
-
Drill 2 holes to the surface according to brackets spacing.
-
Release locking screw on each sides. Angle fixture to desired position and tighten locking screw on each sides.
STEP 1.B
INSTALLATION WITH FLOOR STAND
-
Use fasteners that are a_ appropriate for use with your mounting surface.
Drill 4 holes to the surface according to brackets spacing. -
Attach floor stand to fixture with supplied bolt, washer, and cap nut.
-
Release locking screw on each side. Angle fixture to desired position and tighten locking screw on each sides.
CUSTOMER SUPPORT
QR code for Installations Instructions
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: info@anolis.eu | www.anolislighting.com
VERSION 2.0 / 2_2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>