SUB-ZERO ICBDEC1850FI 18 Inch Designer Column Freezer with Ice Maker User Guide
- June 9, 2024
- SUB-ZERO
Table of Contents
ICBDEC1850FI 18 Inch Designer Column Freezer with Ice Maker
User Guide
Designer Series Refrigeration
Designer Series Refrigeration
With custom front panels and hardware, Sub-Zero invented
Designer Series columns, tall, and drawer models that disappear into the
decor. Units fit flush with other cabinetry, making Designer Series
refrigeration as practical and beautiful in the master suite, bar, or theatre
room as in the kitchen. Model ICBID-24RO, approved for outdoor installations,
is ideal for any outdoor kitchen.
Features and specifications are subject to change at any time without notice.
Throughout this guide, dimensions may vary by ± 3 mm.
COLUMN MODELS
TALL MODELS
DRAWER MODELS
Overall Dimensions
COLUMN
COLUMN | W | A | B |
---|---|---|---|
457 mm Column | 457 mm | 64 mm | 419 mm |
610 mm Column | 610 mm | 102 mm | 572 mm |
762 mm Column | 762 mm | 143 mm | 724 mm |
914 mm Column | 914 mm | 184 mm | 876 mm |
IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness.
Overall Dimensions
DRAWER | W |
---|---|
610 mm Drawer | 610 mm |
762 mm Drawer | 762 mm |
IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness.
Opening Dimensions
DESIGNER SERIES
NOTE: 89 mm finished returns will be visible and should be finished to match cabinetry—114 mm for outdoor model.
OPENING DIMENSIONS
COLUMN | **W*** | H |
---|---|---|
457 mm Column | 457 mm | 2134 mm |
610 mm Column | 610 mm | 2134 mm |
762 mm Column | 762 mm | 2134 mm |
914 mm Column | 914 mm | 2134 mm |
TALL | **W*** | H |
762 mm Tall | 762 mm | 2134 mm |
914 mm Tall | 914 mm | 2134 mm |
DRAWER | **W*** | H |
610 mm Drawer | 610 mm | 876 mm |
762 mm Drawer | 762 mm | 876 mm |
*For stainless steel side panel accessory, add 25 mm per panel to opening width.
The depth of each Designer Series model is 610 mm. Allow for panel thickness
when planning the finished opening depth. A minimum 89 mm finished return is
required on all sides of the opening—114 mm for the outdoor model.
Framed cabinets will require additional finished filler material behind the
face frame for a proper installation.
Refer to the illustration.
Dual Installation
When installing two units side by side in a dual installation, the opening
width is the width of the two units added together. A dual installation kit
will be required for this installation. If a dual installation kit is not
specified, a minimum 51 mm filler strip is required between the units.
Dual installation kits are available through an authorized Sub-Zero dealer.
For questions regarding the installation, contact your authorized Sub-Zero
dealer.
Electrical Requirements
Installation must comply with all applicable electrical codes.
International models from the factory require a 220-240 V AC, 50/60 Hz
electrical supply, fused at the correct rating for the unit.
The electrical supply should be easily accessible and positioned either in a
cabinet above the refrigerator, a minimum of 2200mm above the floor or in
adjacent cabinet.
Plumbing Requirements
Installation must comply with all applicable plumbing codes.
For Designer Series models with an automatic ice maker and/or water dispenser,
a pressure limiting valve and 5 metres of flexible 6mm pipe with fittings is
included in the refrigerator carton. Connect the pressure limiting valve close
to the water tap, CHECKING THE WATER FLOW IS IN
THE RIGHT DIRECTION.
Ensure water connection is 1/2″ BSP male threaded outlet.
Tape the 6mm water line to the wall and floor to ensure it is not compressed
when the refrigerator is pushed into the cavity.
The water tap should be easily accessible and positioned either in a cabinet
above the refrigerator, a minimum of 2200mm above the floor, or in adjacent
cabinet.
Do not use self piercing valves.
IMPORTANT NOTE: In some cases a reverse osmosis water filter system may
not be able to maintain the minimum pressure consistently.
PLUMBING REQUIREMENTS|
---|---
Water Supply Line| 6mm plastic line
Water Pressure| 2.4–8.3 bar
Excess Water Line for Connection| 5 m
Stainless Steel Panels
The outdoor model requires the use of Sub-Zero stainless steel outdoor
accessory panels. Stainless steel panels aravailable through an authorized
Sub-Zero dealer.
The thickness of indoor stainless steel panels is 19 mm and outdoor stainless
steel panels is 38 mm. The depth of each Designer Series model is 610 mm.
Allow for panel thickness when planning the finished opening depth.
Reveals of 3 mm are typical, however, the reveal between the upper and lower
outdoor stainless steel panels is 6 mm to accommodate the lock.
Custom Panels
For Designer Series models, custom door/drawer panels and handle hardware must
be provided.
The thickness of the custom panel can vary. A minimum 16 mm thick panel is
required, but the thickness can be increased provided it does not exceed the
maximum panel weight indicated in the chart below. The depth of each Designer
Series model is 610 mm. Allow for panel thickness when planning the finished
opening depth. Refer to the full-scale template on page 12.
Reveals between panels can vary, 3 mm reveals are typical.
CAUTION
As reveals between cabinetry and the unit decrease, severe finger pinching can
occur while the door is closing.
Custom Panels
TYPICAL PANEL DIMENSIONS
Typical panel dimensions are based on a 2134 mm finished height for column and tall models and 876 mm for drawer models, with a 102 mm toe kick and 3 mm reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel height and the chart below for panel width.
PANEL WIDTH | W |
---|---|
457 mm Model | 451 mm |
610 mm Model | 604 mm |
762 mm Model | 756 mm |
914 mm Model | 908 mm |
Custom Panels
DOOR PANEL HEIGHT
The height of the custom door panel can extend beyond the typical panel
height, provided it does not exceed the weight limit. Refer to the
illustration below.
TOE KICK CLEARANCE
For indoor models only, the height of the toe kick area can extend beyond the
typical toe kick height, provided it does not exceed the dimensions in the
illustration below. Toe kick heights from 51 mm to 98 mm require a reduced toe
kick accessory available through an authorized Sub-Zero dealer.
Standard Handles
Optional stainless steel tubular and pro handles are available through an
authorized Sub-Zero dealer. Refer to the chart below for standard handle
lengths for Designer Series models.
Optional stainless steel tubular and pro handles are available through an
authorized Sub-Zero dealer.
Refer to the chart below for standard handle lengths for Designer Series
models.
HANDLE LENGTH | TUBULAR | PRO |
---|---|---|
Column Door | 1273 mm | 1229 mm |
Tall Door | 845 mm | 800 mm |
610 mm Drawer | 540 mm | 495 mm |
762 mm Drawer | 692 mm | 648 mm |
914 mm Drawer | 845 mm | 800 mm |
Designer Series Undercounter Refrigeration
Designer Series Undercounter Refrigeration
The Sub-Zero Designer Series Undercounter Refrigeration is a helpful addition
to a master suite, bar, home office, or media room. Choose from an all
refrigerator or beverage center. The design flexibility of these compact yet
roomy units makes them all the more welcome in any room.
They are ready to be fitted with a custom or stainless steel panel.
Designer Series Undercounter Refrigeration
The Sub-Zero Designer Series Undercounter Refrigeration is a helpful addition
to a master suite, bar, home office, or media room. Choose from an all
refrigerator or beverage center. The design flexibility of these compact yet
roomy units makes them all the more welcome in any room.
They are ready to be fitted with a custom or stainless steel panel.
DESIGNER SERIES UNDERCOUNTER MODELS
Features and specifications are subject to change at any time without notice.
Throughout this guide, dimensions may vary by ± 3 mm.
Overall Dimensions
UNDERCOUNTER MODELS
IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness.
Opening Dimensions
UNDERCOUNTER MODELS
The depth of each model is 610 mm. Allow for panel thickness when planning the finished opening depth. A minimum 89 mm finished return is required on all sides of the opening. Framed cabinets will require additional finished filler material behind the face frame for a proper installation. Refer to the illustration.
Dual Installation
When installing two units side by side in a dual installation, the opening
width is the width of the two units added together. A dual installation kit
will be required for this installation. If a dual installation kit is not
specified, a minimum 51 mm filler strip is required between the units.
Dual installation kits are available through an authorized Sub-Zero dealer.
For questions regarding the installation, contact your authorized Sub-Zero
dealer.
DUAL OPENING WIDTH | W |
---|---|
Two 610 mm Models | 1222 mm |
Electrical Requirements
Installation must comply with all applicable electrical codes.
International models from the factory require a 220-240 V AC, 50/60 Hz
electrical supply, fused at the correct rating for the unit.
The electrical supply should be easily accessible and positioned in an
adjacent cabinet.
ELECTRICAL REQUIREMENTS
Power Supply | 220-240 V AC, 50/60 Hz |
---|---|
Circuit Breaker | 10 amp |
Receptacle | grounding-type (earthed) |
Designer Series.
Undercounter model.
Location of power.
Custom Panel
The panel cannot exceed the maximum panel weight indicated in the chart below.
The depth of each model is 587 mm.
PANEL REQUIREMENTS
Panel Weight | 10 kg max |
---|---|
Panel Thickness | 16 mm min–19 mm max |
DUAL INSTALLATION
For dual installations, refer to the chart below for typical panel dimensions.
PANEL DIMENSIONS—DUAL INSTALLATION
MODEL | W | H |
---|---|---|
ICBDEU2450R | 605 mm | 772 mm |
ICBDEU2450BG | 605 mm | 772 mm |
TYPICAL PANEL DIMENSIONS
PANEL DIMENSIONS
MODEL | W | H |
---|---|---|
ICBDEU2450R | 604 mm | 772 mm |
ICBDEU2450BG | 604 mm | 772 mm |
Custom Panel
TOE KICK CLEARANCE
The height of the toe kick area can extend beyond the typical toe kick height,
provided it does not exceed the dimensions in the illustration below.
MAXIMUM DOOR OPENING
As the panel width and/or depth increases, so does the potential for panel
interference. Interference may be minimized by using the 90° door stop.
Standard Handles
Optional stainless steel tubular and pro handles are available through an
authorized Sub-Zero dealer. Refer to the chart below for standard handle
lengths.
HANDLE LENGTH | TUBULAR | PRO |
---|---|---|
ICBDEU2450R | 614 mm | 572 mm |
ICBDEU2450BG | 614 mm | 572 mm |
Warranty
Sub-Zero International Limited Warranty
FOR RESIDENTIAL USE
These Warranty Terms and Conditions (‘Warranty’) constitute your agreement
with Sub-Zero Group Australia Pty Ltd (ACN 610 807 899) (‘Sub-Zero’) and will
apply to your service order. The benefits given by this Warranty are in
addition to all consumer guarantees and other rights and remedies prescribed
by the Australian Consumer Law and any other applicable laws.
Our products come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
In addition to your rights and remedies under the Australian Consumer Law,
Sub-Zero provides customers with a Warranty where, if any part of a Sub-Zero
Product is found upon inspection by an authorised Sub-Zero representative or
an associated licensed technician supplied by either Sub-Zero or a relevant
approved supplier (including a Sub- Zero factory certified service) (‘Service
Representative’) to be defective in materials or workmanship, Sub-Zero will
repair or replace the part free of charge as follows:
FULL TWO YEAR WARRANTY* (Outdoor product full one year warranty)
For two years from the date of original installation, this Sub-Zero product
warranty covers all parts and labour to repair or replace, under normal
residential use, any part of the product that proves to be defective in
materials or workmanship. All service provided by Sub-Zero under the above
warranty must be performed by Sub-Zero factory certified service, unless
otherwise specified by Sub-Zero, Inc. Where the Service Representative is
unable to identify any fault in the product, Sub-Zero may require the
consumer to provide proof that the product is defective. For the avoidance of
doubt, defective products or parts become Sub-Zero’s property. Service will be
provided during normal business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY*
For five years from the date of original installation, this Sub-Zero product
warranty covers all parts and labour to repair or replace, under normal
residential use, these parts that prove to be defective in materials or
workmanship: compressor, condenser, evaporator, drier and all connecting
tubing. All service provided by Sub-Zero under the above warranty must be
performed by Sub-Zero factory certified service, unless otherwise specified by
Sub-Zero, Inc. Where the Service Representative is unable to identify any
fault in the product, Sub-Zero may require the consumer to provide proof that
the product is defective. For the avoidance of doubt, defective products or
parts become Sub-Zero’s property. Service will be provided during normal
business hours.
*TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use.
This warranty does not cover any parts or labour to correct any defect caused
by negligence, accident or improper use, maintenance, installation, service
or repair.
CLAIM PROCEDURE*
In order to claim the Warranty, you must cease using the product when a fault
arises, contact Sub-Zero or authourised Sub-Zero dealer where the product was
purchased to report the issue and follow Sub-Zero’s directions regarding what
to do next. SubZero’s general contact details are as follows:
Sub-Zero Group*
Australia
11-19 Bank
Place
Melbourne VIC
3000
Phone: 03 9600 2218 Email:
serviceAU@subzero.com
CLAIM PROCEDURE
Except to the extent required by law, all consumer guarantees,
representations, warranties, terms and conditions in relation to the products
(whether implied or otherwise) are hereby excluded to the maximum extent
permitted by law.
To the fullest extent permitted by law, Sub-Zero excludes all liability for
damage or injury to any person, damage to any property and any indirect
consequential or other loss or damage.
Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labour warranty for cosmetic defects.
Replacement water filters and air purification cartridges are not covered by the product warranty.
Full one year warranty applies to outdoor product. Product must be approved
for outdoor use, designated by model and serial number.