Magene C406 Pro Smart GPS Bike Computer User Manual
- June 9, 2024
- Magene
Table of Contents
- Magene C406 Pro Smart GPS Bike Computer User Manual
- What’s inside
- Installation
- Activation
- Settings
- Connecting Sensors
- Bike Computer Unit Main Functions
- Specifications
- Safety Warnings and Product Information
- Warranty Terms
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Magene C406 Pro Smart GPS Bike Computer User Manual
What’s inside
Installation
Activation
To ensure that your bike computer operates normally, please scan the OR code
to download the One lap fit App. After registering an account and logging in,
you can link, bind and match your bike computer according to the prompt on the
APP. At each start, the App will automatically search for and connect the bike
computer, looking for new ride records and automatically synchronizing new
data.
Step 1. Use the APP to search for your bike computer;
receive a verification code;
Step 3. Enter the verification code. The activation is completed
successfully.
Settings
After the activation and binding, the Settings screen is displayed. On this screen, you can adjust the functions of the bike computer, including the number of screens, display contents of a single screen, and auto power-off. sound on/of personal information modification, firmware upgrade, etc.
Connecting Sensors
The C206 Pro Bike Computer supports a wide range of peripheral sensors such as
speed sensors, cadence sensors, heart rate sensors, etc. You can bind your
peripherals in the following ways. The C206 does not support connecting to any
sensors
On the One lap fit App:
Step 1: Search for the device.
Step 2: Select your device in the search list.
Step 3: When the connection succeeds, the connected sensor is displayed
in the “Connected Devices” on the upper part of the screen.
Syncing and analyzing data:
After finishing your ride, open the OnelapFit App on your phone. The App will
automatically sync the data you can also manually send ride records to the
phone. In the App, “Me”, “Activities” -you can analyze all ride records on the
device.
Bike Computer Unit Main Functions
Status | Left Key | Right Key |
---|---|---|
Power off | Press and hold | |
Ready to ride | Press: Start/Pause | |
Press and hold: Power off | Press: Switch the screens |
Press and hold: Turn on/off the backlight (you can set it for Countcycles by
one lap fit)
Riding| Press: Start/Pause
Press and hold: End ride| Press: Switch the screens
Press and hold: Turn on/off the backlight (you can set it to Countcycles by
one lap fit)
Specifications
Model | P0101005/P0101004 |
---|---|
Battery Type/Capacity | Lithium-ion battery/600mA |
Charging Input | DC 5V, 500mA |
Wireless Transmission Protocol | ANT+, Bluetooth |
Transmission Frequency | 2400-2483.5MHZ |
Transmission Power | Max 2.5mW |
Operating Temperature | -10C-50C |
Weight | 55g |
Dimensions | 70.244.820.9mm |
Catalog and Technical Requirements for Micro power Short-range Radio Transmitter Devices
-
Specific terms: Cat. F Devices
Frequency: 2400-2483.5MHZ
Transmission power limit: 10mW
Frequency tolerance: 75kHz
Use scenario: For ANT +/BLE intelligent hardware control and data transmission
Antenna type: PIFA antenna
Performance/control: Within about 10m transmission distance (open-air areas) -
It is not permitted to change the use scenario or conditions of use, extend the transmission frequency range, increase the transmission power (including installing an additional RF power amplifier), or change the transmission antenna, without authorization.
-
It is not permitted to create interference harmful to other legal radio devices, nor request protection from harmful interference.
-
This product can withstand interference due to radio frequency energy emitted by industrial, scientific, and medical (ISM) application devices or other legal radio devices.
-
If this product creates interference harmful to other legal radio devices, its operation should be halted immediately, and relevant measures taken to eliminate the interferencebefore it is resumed.
-
If any micro-power device is used within an aircraft or the electromagnetic environmental protection area of a radio astronomical observatory, meteorological radar station, satellite earth station (including TT&C, ranging, reception, and navigation stations}, or any other military/civilian radio stations, or an airport as set out in relevant laws, regulations, national provisions or standards, the regulations of the electromagnetic environmental protection authorities anc relevant industry organizations must be followed.
-
It is prohibited to use any remote controller within a radius of 5000 meters from the center of an airport runway.
Safety Warnings and Product Information
Battery-related warning
Failure to notice the potential dangers listed below may lead to severe harm
or even fatal accidents.
The battery used in the product is a lithium-ion battery. Failure to follow
the instructions listed below may shorten the battery’s shelf life, damage the
device, or cause fire, chemical burns, battery leakage, or the risk of injury.
- Do not disassemble, modify, puncture, press, or damage the battery to avoid dangers.
- Do not expose the device or the battery to fire, explosion, or other hazards.
- Do not place or store the device near a dryer, in a car under direct sunlight, or in other high-temperature environments.
- Do not immerse the battery in water or other liquids.
- Do not overcharge the battery frequently.
- Do not charge the battery under fire or extremely high temperatures.
- Charge the battery in strict accordance with the charging requirements to avoid dangers caused by overcurrent.
- If you want to store your device for a long period, store it fully charged to extend battery life.
Warranty Terms
Thank you for choosing MAGNE GPS Bike Computer. Please carefully read the
following terms, in order to receive warranty service.
Repair, replacement, and return:
This product has been strictly tested for quality. According to this Warranty,
during the warranty period, if this product suffers from quality-related
failures when being properly used, free warranty service will be provided.
The warranty period is 24 months in EU countries and 12 months in other
regions. For non-activated products, the warranty period starts from the date
of purchase. If the date of purchase is not specified, the date of manufacture
shall prevail. For repairs covered by the warranty, the product must be
transported by the specified logistics service provider.
Otherwise, you shall bear the freight or any loss caused by transportation.
The following situations are not covered by the warranty:
- The warranty period has expired;
- Any damage caused by improper use, maintenance, or storage;
- The product is damaged because the user did not use or install the product as instructed in the user manual;
- The failure is caused by unauthorized repair, misuse, collision, negligence, abuse, liquid ingress, accident, alteration, or improper use of accessories not matched with the product;
- The Warranty has been altered without authorization;
- The user cannot provide a valid Warranty and invoice;
- The product serial number or code stated on the Warranty is inconsistent with that on the product;
- Failures and damages are caused by other non-product design, manufacture, and quality problems;
- The damage is caused by wear or dirt due to normal use, including human factors such as scratches, exposure to chemical reagents or sharp objects, falling, or pressure;
- Any damage caused by force majeure.
After-sales service period:
The company provides permanent after-sales service for the product. When the
warranty period has expired, only a cost price will be charged for repairs due
to product failures, and only the labor and accessory costs will be charged
for repairs due to human factors.
The company reserves the right to change and interpret the above content.
FCC statements
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CE statements
Declaration of Conformity
Hereby, Qingdao Magene Intelligence Technology Co., Ltd declares that the
radio equipment type P0101005/P0101004 is in compliance with directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.magenefitness.com/certificate.html
RF exposure information: The device has been evaluated to meet the general RF
exposure requirements. The device can be used in portable exposure conditions
without restriction. Radiation Exposure Statement Power is so low that no RF
exposure calculation is needed.
Bluetooth(2400-2483.5 MHz) Max EIRP is-2.61dBm.
ANT+(2457MHz) Max EIRP is-3.26dBm.
| Smart GPS Bike Computer
---|---
Model| P0101005/P0101004
Nominal Voltage| 3.7V
Nominal Capacity| 600mAh
Ref. Weight| 55g
Manufacturer| Qingdao Magene Intelligence Technology Co, Ltd
Address| No.2 AWS, Road, Licang District,
| Qingdao Shandong China
WSJ Product LTD(for authorities only)
Eschborner LandstraBe 42-50
60489 Frankfurt am Main,Hessen, Germany
For more information contact
Qingdao Margene Intelligence Technology Co.Ltd
Website wwwagenetitress.com
After-sales Support:
Supprt@magenefitness.com
No.2AWS, Licang District, Ging0do Shandong. China
Version: V1.0
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>