Magene H803 Heart Rate Armband User Manual
- June 5, 2024
- Magene
Table of Contents
Heart Rate Armband
Model: H803
Safety Warnings and Product Information
Warnings
Failure to notice the potential dangers listed below may lead to severe harm
or even fatal accidents.
Battery-related warnings
The product has a built-in lithium-ion battery. Failure to follow the
instructions listed below may shorten the battery’s shelf life, damage the
device, or cause fire, chemical burns, electrolyte leakage, or the risk of
injury.
- Do not disassemble, modify, puncture, or damage the device or the battery.
- Do not expose the device or the battery to fire, explosion, or other hazards.
- Do not place or store the device near a dryer, in a car under direct sunlight, or in other high-temperature environments.
- Do not immerse the battery in water or other liquids.
- Do not use any sharp object when removing the battery.
- Keep the battery out of reach of children. Swallowing the battery may cause chemical burns, soft tissue perforation, or even death. Seek immediate medical help if the battery is swallowed.
Health and training
Training involves possible risks. We recommend you consult your doctor before
a training program. In addition to training intensity, heart rate is affected
by medications for heart diseases, hypertension, asthma, respiratory,
psychological, and other diseases, as well as energy drinks, alcohol,
nicotine, and drugs. During training, please pay attention to your body’s
response. Stop training immediately and consult your doctor if you feel pain
or are overtired. If you are using a pacemaker or any other implantable
electronic device, theoretically, our product will not interfere with the said
devices; however, due to the variety of your devices used, we cannot assure
you that our product is fully compatible with all implantable electronic
devices. Please consult your doctor if you feel something is wrong. Stop using
the product and consult your doctor if your skin gets allergic or you suspect
an allergic reaction due to our product. Besides, we will highly appreciate it
if you inform our Customer Service Center about your allergic reaction.
Besides, if you apply perfume, sunscreen cream, moisture, or insect repellent
on your skin, make sure these applied parts do not contact our product.
Product Introduction
Driven by advanced optical heart rate technologies, our heart rate armband supports standard Bluetooth and ANT+ protocols and can be paired with some bike computers, sports watches, and Apps. With an adjustable band, you can wear the device on your forearm. It can record every beat of your heart, and help you do workouts joyfully and scientifically.
Wearing
Wear the heart rate armband near your elbow or on the inner or the outer side of your upper arm or forearm, as shown in the following figure, to get the best accuracy of heart rate measurements. Adjust the band to fit with your arm well to the extent that you feel comfortable and the band is tight enough to hold in place during your workout.
Pairing and Settings
Pairing the heart rate armband with a Bluetooth device Wear the heart rate
armband before you pair it with a compatible device. Keep the armband within 3
meters of the device to be paired and over 10 meters away from other Bluetooth
devices. The sensor cannot be found by directly using Bluetooth on a phone and
can only be connected to one Bluetooth device or one app at the same time.
When the initial pairing is complete, the compatible device will automatically
identify the enabled heart rate armband.
Pairing the heart rate armband with an ANT+ device
Wear the heart rate armband before you pair it with a compatible device. Keep
the armband within 3 meters of the device to be paired and over 10 meters away
from other ANT+ devices. When the initial pairing is complete, the compatible
device will automatically identify the enabled heart rate armband.
Heart rate warning value setting
The initial heart rate warning value of the heart rate armband is 180BPM by
default. You can connect the device to your OnelapFit APP, and set the heart
rate warning value on the App. Scan the QR code below to download our
OnelapFit for more information.
https://onelap.com/topic/onelapfit.html
Charging
Insert the attached magnetic charging cable to a USB port for easy charging, as shown in the following figure. During charging, the indicator is blinking red. Once the device is fully charged, the indicator turns solid green.
LED Indication and Vibration Description
Power on
Press and hold the button for 2s. The device is powered on, and the sensor
vibrates.
Connect
LED blinking blue: The product wakes up and is searching for a compatible
device. LED solid blue: The product is connected to a device.
Shutdown
Press and hold the button for 2s. The LED indicator is blinking red, the
sensor vibrates, and the device is powered off.
Charging:
The LED indicator is blinking red. Once the device is fully charged, the LED
indicator turns solid green.
Update
The indicator is solid blue until the upgrade is successful.
Heart rate alarm value limit
The initial HR alarm value is 180bpm by default and can be changed via our
OnelapFit APP. Once the heart rate exceeds the warning value limit, the heart
rate armband vibrates to remind you.
Press button
The heart rate armband gives a 60s broadcast.
Device disconnection
The sensor vibrates to remind you that the device is disconnected.
FAQs
What bike computers, sports watches, and apps are compatible with the heart
rate armband?
The heart rate sensor can be connected to bike computers, sports watches, and
apps of peripherals that support standard Bluetooth or ANT+ protocols.
Follow the instructions below if heart rate data is abnormal or not displayed.
- Press the Power button for about 2-3s, then the device will be powered off and rebooted. In this process, check if the LED indicator is blinking.
- Make sure that Bluetooth and positioning services are authorized on your device.
- Make sure your bike computer, sports watch or app is compatible with the heart rate armband.
- Make sure the heart rate armband is correctly fitted on the upper part of your forearm, and the band is comfortable and tight enough to hold in place during your workout.
- Remove any dirt or debris from the heart rate armband, with mild soap and water if necessary. If these steps do not work, contact our after-sales for technical support.
How long is the battery life of the heart rate armband?
The battery life is up to 45 hours.
Specifications
The product includes: a sensor, a charging cable, a Leica armband, instructions
Heart rate range| 40-220rpm
Battery type| Rechargeable lithium-ion battery
Battery life| 45h
Wireless communication protocols| Bluetooth & ANT+
Weight| 12g
Dimensions| 44°31.6°11.2mm
Ingress protection rating| IP67
Operating temperature| 0°C-45°C
Frequency range| 2400 to 2483 MHz
Output power(Max.)| 0 dBm
•The actual battery life depends on the environment of use.
FCC statements
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure conditions without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.
CE statements
Declaration of Conformity Hereby, Qingdao Magene Intelligence Technology Co, Ltd declares that the radio equipment type H803 is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: https://www.magenefitness.com/certificate.html
Magene Heart Rate Armband
Model| H803
Nominal Voltage| 3.8V(Lithium-ion battery)
Nominal Capacity| 70mAh(lithium-ion battery)
Ref. Weight| 1.50g(lithium-ion battery)
Manufacturer| Qingdao Magene Intelligence Technology Co, Ltd
Address| No.2 AWS, Road, Licang District,
| Qingdao Shandong China
WSJ Product LTD(for authorities only)
Eschborner Landstra8e 42-50
60489 Frankfurt am Main,Hessen, Germany
For more information, contact us:
Qingdao Magene Intelligence Technology Co, Ltd
Website: www.magenefitness.com
After-sales
support:support@magenefitness.com
No.2 AWS, Licang District, Qingdao, Shandong, China
Version: V1.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>