Magene MG80 Exercise Bike User Manual
- June 5, 2024
- Magene
Table of Contents
Exercise Bike User Manual
Model:MG80 MENG801
Safety Notices
- Please do not let any children or pets approach the Magene Bike alone, and prohibit babies or infants from approaching the product, so as to prevent danger.
- Please use the product on flat and firm floor. Adjust the pedestal of the Magene Bike to a balanced position, and it is recommended to arrange an anti-skidding foot pad under the bike.
- During installation and use, please ensure there is no interference or impediment within 1m around the bike.
- Before each use, please make sure no parts of the Magene Bike are damaged or loosened and check the locking regulating part.
- In case of any emergencies in use please rapidly press the emergency brake handle.
- In case of any discomfort in use, please stop exercising immediately and go to hospital.
- Do not reach your hands or other widgets into the Interior of the Magene Bike lest danger be caused.
- Please wear proper clothes and sport shoes for exercise. Do not wear loose clothes lest they be drawn into the bike.
- Please do not refit the bike or use any non-original parts.
- The physically inconvenienced user should do not use the product alone but be accompanied by professionals for use.
- Before exercise, please do some warm-up first to avoid straining your body.
- The maximum limit weight of the bike is 115kg.
- The bike shall be used by only one people each time. Never let two people use it simultane-ously.
- Please adjust the positions of handle and seat according to your height and be sure to lock the positions after adjustment.
- As the pedal spinning at a high speed may cause injury, please do exercise with pedal under control.
- Before each use, please ensure each system is effective and all parts are not loose or abnormal. Do not use the bike in the event that it has any abnormalities.
- The product adopts a self-locking pedal and unidirectional flywheel. In the trial use, please refer to the locking method of pedal and use cadence of S40 for adaptive exercise of emergency brake.
- The sufferers of hypertension or heart diseases should consult the doctor before use, and stop exercising immediately in case of any discomfort.
- Please firmly fix your mobile phone or tablet to avoid accidental damage by shaking during exercise Our company will not be responsible for any losses incurred by failure to fix the mobile phone or tablet.
Notice: Before using this product or doing other exercises, please consult
your doctor. Please safekeep this manual for future reference.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: —Reorient or relocate
the receiving antenna. —Increase the separation between the equipment and
receiver. —Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. —Consult the dealer or an experienced
radio/TV technician for help.
Parts list (accessories list)| S.N.| Name| Quantity|
Diagram
---|---|---|---|---
0| Front wound-dor° pipe| 1|
®| Rear grand-clinging pipe| 1|
0| Motile phone-tablet tray| 1|
(4)| Top cater of
delay screen| 1|
| Handle| 1|
0| Cross screw| 2|
OD| Coach belt for fixing
front and rear legs| 4|
8| Circular gasket far
front mid-rear lags| 4|
9| Box nut| 4|
(Eiji| Round-head model
head screw| 4|
1| Pedal| 1 pair|
©| Ads| 1|
1 Tools list| A| L-wrench
Aden wrens: Wades wrench| 1|
B| Fork wrench 13/15mm| 1|
Installation Method and Steps
-
Please open the external package as per the unpacking instruction on outside of the carton, and remove the foam and protective film to take out all parts in the carton. It is recommended to reserve a 2mt2m open space for installation.
-
Use tool B fork wrench to install the front and rear floor-clinging pipes: Place (I) front ground-clinging pipe under the bike and make sure the contact roller faces forward and foot pad is in the lower part, put in CV coach bolt from the bottom, fix (S) circular gasket and (P) M8 box nut via tool B fork wrench from the upper part, and make sure the two are fully screwed until they do not shake. Use the same method to install (2) rear ground-clinging pipe, make sure the foot pad is in the lower part and the bolts are fully tightened.
-
Use the cross end of tool A to fix (1 mobile phone/tablet tray onto the handle, fully screw CO set screw until the tray does not shake.
-
Use the hexagon end of tool A to fix (5; handle unit to the bike using CR’ screw. Notice: Screw in bolts as per sequence of tags 1/2/3/4 in turn, then fully tighten them as per the same sequence, and make sure no shaking when handle is shaken with force.
-
Install (P top cover of display screen, align the direction and press the buckle downward in place with slight force, and a click sound Is emitted, now the gap around is perfectly fitted.
-
Use tool B fork wrench to install accessory SID left and right pedals. Pay attention to UR sign at axle center of pedal or band to differentiate left and right pedals.
-
After the axle center of pedal is aligned with the hole site of crank, use tool B fork wrench to lock left and right pedals as per the locking direction as shown in figure below, to make sure the pedals are fully screwed and fixed without shaking.
-
Open the tightening wrench under handle and seat to adjust the handle and seat to height proper for yourself, then again lock the wrench and fully fix it. Note: Please be sure to adjust according to the user’s height, lest danger or accidental injury be caused_
-
Please adjust the four-foot pads on bottom of the bike as appropriate according to the height of floor, to eliminate shaking of the entire bike relative to floor.
Installation is finished.
Note: This product is of fixed gear (The fly wheel is always linked with
the pedal), so please be sure to proficiently master the method of using
emergency stop handle for brake before riding the bike, so as to prevent
accident.
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Caution: The
manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications or changes to this equipment. Such modifications or
changes could void the user’ s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
Use notice
-
After assembly, make sure no impediments within 1.5m around the device before use. Connect the power adapter to the 100-240V-50/60Hz socket of the mains and ensure good contact without loosening, and connect another end to the power interface in rear part of the bike, ensure full contact of the two connectors without loosening
-
After successful activation, the ambient lamp at bottom of the carriage is ON immediately and displays red in the form of breathing light.
-
In the meanwhile, the screen at the bike head becomes ON, and is in resistance mode by default and displays the current real-time power value when the APP is not connected. The resistance grade of 0-100 can be adjusted by turning the knob. When the APP is connected, the bike’s mode is as shown in right figure:
-
Before riding, be sure to properly adjust the height of handle and seat cushion according to your own conditions and firmly fix the pipe clamp, to prevent danger or injury. If the pipe clamp for seat cannot be effectively locked, please open it to loosen state and tighten the lateral screw with tool A fork wrench and then relock it.
-
In case of any emergencies or discomfort, please stop immediately by pressing the red STOP brake handle to brake and stop exercising. Please do not attempt to take your foot off the bike by force or use the ways other than the brake to stop.
-
Adjust the binder of pedal according to your shoe size to fikypur feet and ensure no shaking. Press the pedal to start the bike for exercise. The ambient lamp on the bottom will change color according to current detection power.
-
Please firmly fix your mobile phone or tablet to avoid accidental damage caused by shaking in exercise. Our company will not be responsible for the losses caused by failure to properly fix the mobile phone/tablet After use, please disconnect the power and place the product indoors to avoid sunshine or drenching. The suction cup shall be regularly cleaned.
** We provide two kinds of APP software, which can be downloaded by
scanning the following OR code or from the APP store. After downloading, just
register and it is ready to use. After connecting to your device, the two APP
products can provide a riding experience of different scenarios and can record
and manage your sports data. Now get moving!
OnelapFit:** Onlap: Download it from Apple Store or Google play
Onlap: Download it from Apple Store or Play. Google Play.
Magene Speed/Cadence Sensor
Model| MG80
| Nominal Voltage:12V(ABT040120)
| Nominal Capacity:4A(ABT040120)
Manufacturer| Qingdao Magene Intelligence Technology Co., Ltd.
Address| Room 302, Building 3, No.328A Chengyang Road,
| Xiazhuang Subdistrict, Chengyang District, Qingdao, Shandong, China
| WSJ Product LTD(for authorities only) Eschborn
LandstraBe 42-50
60489 Frankfurt am Main,Hessen, Germany
Tips for healthy sport
Continuously using the product will benefit your health in several ways, such as effectively improving your physical quality, building your muscle, enhancing stamina of heart and lungs, and helping to reduce fat and shape body successfully.
-
Warm-up: Warm-up enables the blood in all parts of body to fully flow and promotes muscle’s effective operation. This stage should account for 10% to 20% of total length of exercise, and can significantly reduce the risks of cramps and muscle injury during exercise. It is recommended to do some stretching actions, each of which should not be shorter than 30s. Do not stretch your body excessively, and stop immediately if any discomfort.
-
Exercise: This stage requires persisting for long. Regular training each week will strengthen your leg muscle, plus the training courses in the APP can effectively help you to reduce fat, shape body and stay away from sub-health. Besides, we suggest paying attention to your heart rate zone during exercise, as maintaining the heart rate within a certain zone can effectively learn own health state.
Heart rate zone
-
Relaxation: This stage aims to fully relax your cardiovascular system and muscle and should last for about 5 to 10min. The stretching actions can gradually make the strained muscle relax and pulse slow down to normal state. After exercise, never drink a lot of water or overeat to prevent injury. When your physical quality is improved, you can enhance the exercise intensity as appropriate with the guidance of coach to further enhance the heart and lung stamina.
Product parameters
Applicable power supply: | 100-240V-50/60Hz |
---|---|
Weight: | About 36kg in gross weight |
Maximum torque: | 32N.m |
Maximum power: | 402 W |
Maximum cadence: | 120 RPM |
Weight of flywheel: | 7kg |
Power accuracy: | 5% |
Height limit. | 155crn-185cm |
Floor space: | LHW 1030975230(mm) |
Mode switching: | APP-controlled |
Mode description: | Target power, slope, resistance, game mode |
Package size: | LHW 9601,000520 (mm) |
Compatibility: | Standard Bluetooth and ANT+ communication protocol, support |
Onelap • Fitness and One lap Match, Zwift, etc
Part| Symptom| Solution
---|---|---
Bike
body| No data is
displayed| Please make sure the socket is live, and re-connect the power
adapter and tightly re-plug in the connector, then observe the screen for
displaying. If the problem still exists, please contact the after-sales
service personnel.
Regulation
knob fails| Power off and then power on, turn the knob and observe whether the
data jumps. If the problem still exists, please contact the after-sales
service personnel.
Handle shakes| Uplift to dismantle the head cover of bike. and screw down the
4 bolts using the hexagon wrench in the accessories, then re-install the head
cover and observe whether the handle still shakes. If the problem still
exists, please contact the after-sales service personnel.
Ambient lamp
cannot
be lightened up| Please make sure the socket is alive, and disconnect the
power adapter and then re-conned it to observe whether the ambient lamp
becomes ON. If the problem still exists, please contact the after-sales
service personnel.
Seat pillar cannot
be adjusted| Unscrew quick clamp and the bolts on both sides to adjust the
seal pillar to proper height, then re-tighten the quick clamp. If the problem
still exists, please contact the after-sales service personnel.
Seatpost damp
shakes| Unscrew the bolt at rear part of seatpost clamp and adjust It to
proper position, then re-screw down it.
Forward or
backward
movement fails| Unscrew the bottom set screw nut using the hexagon wrench in
the accessories, move the seat cushion to proper position, then re-screw down
the set screw nut.
The contact roller
cannot rotate| Check whether the contact roller is impeded by any sundries.
and unscrew the set screw nut to ensure the contact roller can rotate. If the
problem still exists, please contact the after-sales service personnel.
The bike shakes
in riding| Screw down the coach bolt on the bottom to ensure the carriage is
fully tightened with the front and rear legs. Adjust the height of foot pad,
to make the bike body fully contact the floor and keep balance. If the problem
still exists. please contact the after-sales service personnel.
The binder
comes off| Please adjust the binder to proper fastener according to own shoe
size, tighten it and confirm.
The pedals
come off| Use wrench to re4ighten the pedals, pay attention to differentiating
the left and right ones to prevent dangers. If the problem still exists,
please contact the after-sales service personnel.
APP| The device cannot
be searched out| Make sure the mobile phone’s Bluetooth is turned on. and re-
start the APP to attempt to connect the device again.
APP runs
abnormally| Uninstall the APP and re-install it, and confirm the APP Is the
latest version.
Bluetooth signal
Is weak| Limited by the communication distance of Bluetooth, it is recommended
to use the product within 3m.
Warranty and After-sales Service
Thank you for purchasing the product. To provide you with quality service,
please carefully read fill in, seal and safekeep this card after purchase.
“Three guarantees”:
The product has passed strict quality inspection. According to the description
in this warranty card. we provide free maintenance for the fault within the
warranty period caused by quality defects. The product with quality defect can
be returned or exchanged within seven (ind.) days since the purchase date. The
product enjoys a warranty period of 365 days, which shall be subject to the
time specified on the purchase invoice. The rework covered by warranty
requires using the original package and choosing designated logistics service
provider for transport, or the user shall assume the freight or the losses
caused by transport.
The “three guarantees” excludes the following:
The validity term of ‘three guarantees’ has expired. The claimant has no
effective voucher for “three guarantees” or valid invoice. The product number
or code on the voucher for °three guarantees’ does not match the real object.
The voucher for ‘three guarantees” is altered without permission. The product
damage caused by failure to use or assemble the product as per the user
manual. The product damage by use such as normal attrition and dirt like
scratch, or the product damage caused by artificial factors such as contacting
chemical reagents and sham objects, dropping or extrusion, etc. The product
damage caused by force majeure factors. The product damage caused by improper
use maintenance and storage. The product damage caused by unauthorized
maintenance, misuse, collision, negligence, liquid ingress, change, and
indefinite use of non-original accessories. Other faults and damage not caused
by the design, manufacture and quality problems of the product.
After-sales Service Term:
Our company provides lifelong after-sales service for the product. When the
warranty period expires, we charge cost expenses of parts for repair, and only
charge the labor and cost expenses of parts for repairing the artificial
damage.
Our company reserves the right b modify and Interpret the above content.
Simpliflied EU Declaration of Conformity
Hereby, Qingdao Magene Intelligence Technology Co., Ltd. declares that the
radio equipment type MG80 is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address:
https://www.magenefitness.com/certificate.html
For more information, contact us: Qingdao Magene Intelligence Technology Co.,
Ltd. We bsite: www.magenefitness.com After-
sales support: support@magenefitness.com
90% of sport injury From now on be serious with each exercise
To learn more, please visit
www.magenefitness.com Email:
support@magenefitness.com