groov-e GV-SB04 110W All-in-One Bluetooth Soundbar User Manual
- June 9, 2024
- Groov-e
Table of Contents
groov-e GV-SB04 110W All-in-One Bluetooth Soundbar User Manual
“Congratulations on your purchase and Thank You for choosing the groov-e GV-SB04 110W All-in-One Bluetooth Soundbar. Please read the guide carefully before using”.
CAUTION
- Keep the product and all its parts out of reach of small children.
- Do NOT leave it in high temperatures as electronic devices and plastic parts may warp in heat. No naked flame sources, such as lighted candles, should be placed on the product.
- Do NOT leave it in low temperatures as moisture can form inside the product, which may damage the circuit board.
- Do NOT attempt to open the product. This product does not contain any user serviceable parts. Unauthorised handling of the device may damage it and will void your warranty.
- Disconnect your Soundbar from the mains power supply during thunderstorms.
- Always check that you have completely switched off your Soundbar, before you change or disconnect the power supply.
- Never throw batteries in a fire or attempt to open the outer casing. Batteries should not be exposed to excessive heat such as sunshine, fire or the like. Dispose of old batteries carefully.
- Batteries are harmful if swallowed, so keep away from young children.
OVERVIEW
Box Contents
- GV-SB04 Soundbar x 1
- Remote Control x 1
- Power Adapter x 1
- Optical Cable x 1
- User Manual x1
Functions
TOP VIEW
Inserting Remote Batteries
Remote Buttons
Using the Remote Control
The remote control sensor at the front of the soundbar is sensitive to the remote control’s commands up to a maximum of 8 metres away and within a maximum arc of 30 degrees. Please note that the operating distance may vary depending on the brightness of the room.
Instructions
Connecting to the mains supply
Ensure that the power supply voltage is in the voltage of 110V~240V. This unit
is designed This unit is designed This unit is designed This unit is designed
to use the supplied adapter only. Connecting the unit to any other power
source may cause damage to the unit. Unwind the mains cable to its full
length. Connect the mains plug to a mains socket. Make sure the mains plug is
fully inserted into the mains socket. Connect the adapter to the unit via the
DCinput Socket. (DC-20V-IN)
Using the Bluetooth
Pairing a Bluetooth Device for the First Time. Press the POWER button on the
unit or the POWER button on the remote control to switch on the unit. Press
Bluetooth button on the remote to enter Bluetooth pairing mode. Using the
controls on your Bluetooth device, select the “GV-SB04” in your Bluetooth
settings to pair. Refer to the user manual for your specific device for
instructions on pairing and connecting Bluetooth devices. When successfully
paired and connected, a beep will issue from the unit. After initial pairing,
the unit will stay paired unless unpaired manually by the user. If your device
unit will should become unpaired or you find it is unable to connect, repeat
the above steps.
Using USB
- Insert a USB drive into the USB port.
- Press the SourceMode button repeatedly on the remote control until USB mode appears on the display. To Play/Pause the track or Skip Forwards/Backwards to a selected track, use the remote control. Audio played through the connected USB device will now be heard.
Using Optical Input
You will need: An audio source with an Optical Audio Output and an Optical
cable (included).
- Connect the Optical Audio cable to the optical output on the audio source and to the Optical Input on the soundbar. Press the POWER button on the soundbar or POWER button directly on the remote control to switch on the unit.
- Press the OPT button on the remote control to switch to Optical mode or press the MODE button on the main unit press repeatedly to select the Optical mode. Using the controls on your connected device, make sure the audio settings are setUsing the to PCM or Audio and are turned On. Audio from the connected audio source willnow be played through the speakers.
Connecting Aux to TV or MP3 Player
Plug one end Plug one end of a 3.5mm to 3.5mm Aux In cable (not supplied) into
the Aux port on the unit.Then plug the other end of the cable into the audio
output on your TV or MP3 player or other audio source. Press the Power button
on the soundbar or Power button directly on the remote control to switch on
the unit. Press the Mode button repeatedly on the soundbar or remote or press
the AUX button on the remote control to enter AUX mode. Audio played through
the TV or connected device will now be heard through the speakers.
Option For Wall Mounting
If you wish to wall mount the unit, please use Universal Soundbar brackets (not included)
Troubleshooting
If the soundbar does not work properly as desired, please check the following.
| Malfunction | Possible Cause/Measure |
|---|---|
| No power / function | Check whether the power is switched on or off at the |
wall. Check whether the power adaptor is properly connected to power outlet or
not.
No sound| Check whether cables are properly installed. If they are, please try
alternative cable to connect to your TV if possible. Check unit is out of
standby and in mode.
No sound from Bluetooth connection| Disconnect the soundbar from your device
and reconnect.
Function disturbance| Switch off and unplug the unit. Leave it for 2 minutes
and switch it on again. If a particular mode is causing problems, please try
an alternative connection to your TV such as Optical or Bluetooth.
Remote control does not work [properly]| Check whether the batteries have run
out or not. Replace with a new ones if necessary. Check whether there is an
obstacle blocking the remotes signal.
FEATURES
- Speakers: 60W RMS power & 110W peak power
- 2 x full-range speakers + 2 x tweeters
- Compatible with most TV’s for home theatre sound
- Wireless Bluetooth speaker
- connect to your TV, PC, Laptop, Computer, Smartphone, Tablet
- LED display panel
- Crisp & clear sound with deep base
- 3 sound modes (Music, Movie, Voice)
- Easy controls
- 4 Input modes: O
- 4 Input modes: Optical, USB, AUX (3.5mm), Bluetooth
- 1.5M Optical cable (included)
- Remote control (included)
- requires 2 x AAA batteries (included)
SPECIFICATIONS
- Bluetooth chipset: 5.0
- Bluetooth profiles: A2DP, HFP, HSP, AVRCP, SPP
- Bluetooth frequency range: 2.402-2.480 GHZ
- RF output p RF output power: 4dB
- Wireless range: 10M (open area)
- Power supply: AC100~240V/50~60Hz, DC 20V/2A
- Speaker power: 60W (2 x 30W)
- Speaker channel: 2.2
110W Power
Bluetooth Connectivity
Super Bass
Remote Control
Optical Cable Included
BATTERY REMOVAL/DISPOSAL
This product contains batteries and should not be treated as normal household
waste and should be recycled. Please take it to your nearest collection
facility or for further details contact your local council or visit www
.recycle-more.co.uk Batteries contain substances that may be harmful to the
environment and human health. Keep out of the reach of children and seek
immediate medical help if swallowed.
Never throw batteries into a fire or attempt to open the outer casing. Should
your product develop a fault and your battery needs replacing for further
advice on how to safely remove your battery please visit our website at
www.groov-e.co.uk
Environment Protection Waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist. Check with you
Local Authority or retailer for recycling advice.
GUARANTEE
Subject Subject to the conditions stated below, Groov-e guarantees this equipment against defects in workmanship or materials of its mechanical and electronic component parts (excluding styling, battery cells, magnetic tapes, re-chargeable batteries, user removeable memory devices, with the exception where the battery is inbuilt into the product) for a period of one year from the date of purchase. This product will be repaired or if necessary replaced free of charge if it has been proven to be defective within the one within the one year warranty period.
- Claims under this guarantee should be made through the authorised dealer/retailer from whom the equipment was purchased. If this is not possible, please contact Groov-e directly.
- This guarantee is only valid when the equipment is purchased and retained within the United Kingdom and a valid proof of purchase has been provided.
- This Guarantee Excludes:
- All damage caused through accident, misuse, wear and tear, neglect, installation and/or use in a manner inconsistent with technical and safety standards.
- Alterations or adjustments made to equipment
- Loss of data resultant from malfunction of hard drive or other storage device
- Damage caused to any third party device as a result of using the product.
- No liability under this guarantee shall be incurred:
- In respect of damage or loss occurring during transit to or from the purchaser
- Where the serial number plate of the equipment has been removed or altered in any way.
- Groov-e shall not be liable for consequential damage, loss or injury arising from or in connection with the equipment, excepting only that nothing in this condition shall or shall be construed so as to exclude or restrict liability for negligence.
- The cost of carriage to and from Groov-e shall be borne by the purchaser.
- This guarantee is personal to the original purchaser and is not transferable.re
- If the equipment, in respect of which a claim hereunder is made, is found on examination to comply with the published specifications, a test fee may be incurred.
This guarantee is in addition to and does not in any way affect any statutory or other right of consumer purchasers, including those rights in relation to sections 13 to 15 of the Sale of Goods Act 1979, the Sale and Supply of Goods to Consumer Regulations 2002, The Consumer Rights Act 2015 or the Sale of Goods and Supply of Services Act 1980 (for ROI).
DECLARATION OF CONFORMANCE
Groov-e hereby declares that this product is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU. The complete declaration of conformity can be requested from us at:
Unit J Braintree Industrial Estate
Braintree Road
Ruislip
Middles Middlesex
HA4 0EJ UK
www.groov-e.co.uk
Email: info@groov-e.co.uk
Telephone: 020 8839 0978
Authorised EU Representative
Rashmian EU Ltd
Robwyn House Suite 3E Corrintra
Castleblayney
Co. Monaghan Ireland
Register your purchase for extended warranty
www.groov-e.co.uk/warranty
30 Day Right To Return
We do not envisage any problems occurring with your groov-e GV-SB04 110W All-
in-One Bluetooth Soundbar. However, for your peace of mind, should any fault
occur, please return it within 30 days to your retailer with proof of purchase
for an exchange or refund.
12 Month Guarantee
This product is guaranteed for twelve months. Please retain your receipt as
this will be required as proof of purchase in the event that the device does
not perform as expected then please contact your original point of purchase,
should you require further assistance then please contact us.
Extended Warranty
Please register your product within 30 days from date of purchase
www.groov-e.co.uk/warranty. Proof of
purchase required.
Contact Us
Reach out to us at info@groov-e.co.uk or visit
www.groov-e.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>