CYC MOTOR X-Series X-36 Batteries for Electric Bikes User Manual
- June 5, 2024
- CYC Motor
Table of Contents
X-Series Batteries
(X-36 ; X-52 ; X-52L)
User Manual
SAFETY & PRECAUTION
General Safety
Kindly read through the entire user manual. This manual contains important
information to reduce user risk as well as instructions for this product’s
proper use. Do not discard the manual but keep it for reference.
Note that the user’s personal safety remains the user’s responsibility and
that the user must contact CYC Motor Ltd or an official product dealer
directly for any further guidelines or assistance.
This product is an electrical system that is dangerous for children and must
always be handled by an adult. Small components and accessories may also
present a choking hazard. Keep this product and its accessories out of reach
from children.
Keep all electrical wires secured as exposed wires could lead to serious
injury or product damage. Also inspect the condition of the wires regularly
for any damage.
Never interfere with the parts or attempt to disassemble the internal parts of
the battery when the battery is connected or switched on. This could result in
serious injury or damage to the product.
All components and accessories may only be replaced with identical components
directly supplied by CYC Motor Ltd or an official product dealer. CYC Motor
Ltd cannot be held liable for any damage as a result of using unapproved
parts.
Before the Ride
Ensure that the battery mount is fastened securely to the frame and that the
battery is secured to the mount. Incorrect mounting could cause the system to
move its position and result in injury while riding. Inspect the mounting
position regularly.
Ensure that all wiring is dry before connecting it to the controller.
When connecting the battery, make sure that it is properly connected. The
faulty connection could result in a short circuit and damage the controller
and/ or battery.
Secure all wires properly. Make sure that no loose wires are dangling from the
bike that could be jammed into any moving parts.
Inspect electrical wires and plugs regularly for any damage.
Installation & Use
Follow the installation guidelines provided in this user manual to fit your
battery pack securely to your bicycle frame. This product is manufactured to
be used as an electric bicycle battery pack for powering the CYC Motor Ltd
mid-drive motor product line. Using this battery for anything other than its
intended use is not recommended.
The installation guidelines also provide you with clear instructions on usage
and charging. Kindly be mindful regarding the charging information.
The battery pack is intended to be mounted to the 2 mounting holes in the
downtube of the bicycle where a water bottle cage would normally be. We have
included instructions for this standard and recommended mounting position for
your reference. Kindly note that any other mounting position is up to the
user’s own discretion and risk.
The battery level can be checked by pressing down the silver, circular button.
Do not fast press this button continuously.
Do not install anything other than the parts and accessories that came with
the battery unit. Doing so could damage the product.
Be sure to familiarize yourself with the product warnings provided in this
user manual.
Disclaimer
If you require any more information or have any questions about the user
manual disclaimer, kindly contact us via email at
[email protected] or call +852 3690 8938.
All the information contained in this user manual is published in good faith
and for general informational purposes only. CYC Motor Ltd does not make any
warranties about the completeness of this information and encourages further
inquiries as stated above if needed. CYC Motor Ltd will not be held liable for
any losses and/or damages in connection with the use of this product. The use
of this product is at the user’s own risk.
Notice: Please contact CYC Motor Ltd if unsure about the assembly instructions or for any further assistance as CYC Motor Ltd will not be held liable for any losses and/ or damages caused by the assembly.
SPECIFICATION
Description
This product is a lithium electric bicycle (e-bike) battery pack designed
to complement the CYC Motor product line. The X-Series E-bike Battery is an
efficient, long-lasting energy source with fast charging capabilities. It is
equipped with a Battery Management System (BMS) that ensures safe operating
and reliable data reading.
General specifications
| X-36| X-52| X-52L
---|---|---|---
Battery Voltage| 36V (2 pl Os)| 52V (2p14s)| 52V (3p14s)
Battery Capacity| 8Ah (288Wh)| 8Ah (416Wh)| 12Ah (624Wh)
Maximum Continuous Discharge Current| 60A| 60A| 80A
Maximum Charge Current| 2A| 4A| 4A
Weigh (Battery Only)| 2.3 Kg| 3.2 Kg| 4.5 Kg
Weight with Mount| 2.6 Kg| 3.5 Kg| 4.8 Kg
Weight with Mount & Magnets| 2.8 Kg| 3.7 Kg| 5 Kg
*** Compatible with X1 Pro Gen 1, X1 Pro Gen 2, & X1 Stealth
Features
- Quick removal for portability.
- Ice blue battery level indicator for easy indication during use.
- Industrial design casing to fit with the aesthetic of the CYC mid-drive system line-up.
- Custom-made gasket.
- A magnetic battery mount helps to prevent the frame and battery components from being damaged upon impact.
Package Inclusion
- High Impact Polycarbonate Battery Case (containing Samsung 40T cells module, battery management system (BMS), & XT-90 connector)
All parts listed are included in the package with every purchase. Should any
part be missing, kindly contact
[email protected] along with your order
number as a reference?
Thank you.
Dimensions
INSTALLATION
Required Tools|
3mm Allen Key
Operating Notice
RIGHT-HAND and LEFT-HAND sides are determined by the bike handle; Right-
hand corresponds to the right handle & vice versa.
Alternative Mounting Method
The battery pack can be mounted directly to the bike’s frame without the use of the 048 neodymium magnets.
Step 1: Fasten the mount directly to the bike’s cage mount screw holes. Do not
assemble the battery pack to the mount yet.
Step 2: Secure the battery pack to the mount using the M5 screws and wing nuts
as shown below
Step 3: Ensure that all screws are fastened and use the straps provided if needed for extra security.
Magnetic Battery Mount & Battery Pack
**** Step 1 – Use M5 screws to mount the 048 neodymium magnets to the cage mount’s screw holes with a spring-lock washer inbetween.
Step 2 – Use M5 screws & wing nuts to combine the X-Series Battery with the metal mount
Magnetic Battery Mount & Battery Pack
**** – Slide the battery in from either side & with side rotation motion to the magnet on the bike to hold in position.
– Adjust the position as needed. (Straps can also be used for extra security)
Wiring & Connection
Battery Connector: XT-90 (female)
Wire: 10 AWG (red wire to positive pole & black wire to negative pole)
Note that the XT-90 connector is also used to charge the battery pack. The battery pack must be disconnected from the controller in order to charge.
CHARGE INFORMATION
Charging instructions
- Plug the charger into the wall socket.
- Conned the battery to the charger at the XT-90 connector side.
- Leave until fully charged (approx. 4 hours from empty).
- Unplug after fully charged for safety.
Charger Type: 58V 2A XT-90
Charge Time: 4 hours until fully charged
Charge Cycles: 800+
The battery can stay mounted on the bike or be taken off for charging.
Charge the battery pack fully every 2 months if not used regularly.
Warning
- Refrain from charging the battery pack outdoors
- Unplug the battery pack after it is fully charged; do not leave it connected to the charger for a long period of time.
- Do not interfere with the wires or connectors while charging.
MAINTENANCE
General Maintenance
-
Place the battery pack in a cool and dry environment if you do
not use it for a long time; charge for 4 hours every month. -
Use the designated lithium battery charger when charging.
-
Keep away from children.
-
Do not reverse or short the positive and negative terminals of the battery pack.
-
Do not place the battery pack in high temperatures, such as heating, fire, or sun exposure.
-
Do not place the battery pack in water, acid, alkaline or salty liquids, avoid the rain.
-
Do not open the battery without special instruction.
-
Do not invert the battery pack.
TERMS & CONDITIONS
Warranty CYC Motor Ltd offers a 1-year warranty for the battery, mount and
charger. Man-made failure and other parts are excluded from our warranty.
For any replacement parts, please visit the CYC Motor Ltd official online
store at www.cycmotor.com/shop or an official
product dealer.
Contact Information
email to: [email protected]
For customer support, including
- shipping;
- quotes, and
- sales
email to: [email protected]
For technical support, including
- build assistance;
- recommendations;
- troubleshooting, and
- product related queries
phone to: +852 3690 8938
Office Hours
Monday to Friday 9 am – 6pm
Hong Kong Time
NOTES